Login

8th Pacific Rim Conference on Rheology

15–19 May 2023
University of British Columbia, Point Grey Campus
America/Vancouver timezone
Thank you all for attending and see you in Kobe 2025. We will post pictures on the main site soon.

Conference Contact

Contribution List

177 out of 177 displayed
Export to PDF
  1. 75. What we learn about yielding from recovery rheology
    Simon Rogers (University of Illinois at Urbana-Champaign)
    16/05/2023, 09:00
    Plenary Talk
    Plenary Talk
    Plenary Presentations

    Abstract:
    Yield stress fluids are often thought about in a piecewise manner as behaving like elastic solids below the yield stress and like generalized Newtonian liquids above it. Accurate determination of the yield stress is therefore crucial to understanding and predicting the behaviour of yield stress fluids such as inks for 3D printing, foods and cosmetics, muds and soils, and many...

    Go to contribution page
  2. 126. KEYNOTE: Assessment of Critical Conditions Required for Effective Hole Cleaning in Horizontal Wells - Effects of Fluid Rheological Properties and Near Wall Turbulence on the Particle Removal From Bed Deposits
    Dr Ergun Kuru (University of Alberta)
    16/05/2023, 10:30
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  3. 137. Non-Brownian suspensions in pressure-driven flow: numerical simulations with frame-invariant sub-grid corrections
    Dr Michel Orsi (Levich Institute and Department of Chemical Engineering, CUNY City College of New York, New York, NY 10031, USA)
    16/05/2023, 10:30
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  4. 28. Poroelastic Modelling Reveals The Cooperation Between Two Mechanisms For Albuminuria
    Zelai Xu (University of British Columbia)
    16/05/2023, 10:30
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  5. 71. STUDY OF THE STABILITY OF ELECTRICAL AND RHEOLOGICAL PROPERTIES OF ELECTRICALLY CONDUCTIVE COMPOSITES WITH CO-CONTINUOUS MORPHOLOGY
    Ms Daria Strugova (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)
    16/05/2023, 10:30
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  6. 142. FINITE SYSTEM SIZE CORRECTION IN MICRORHEOLOGICAL ANALYSIS UNDER PERIODIC BOUNDARY CONDITIONS : A DIRECT NUMERICAL SIMULATION APPROACH
    Prof. Yasuya Nakayama (Kyushu University)
    16/05/2023, 10:50
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  7. 31. Hydrodynamics and rheology of fluctuating, semiflexible, inextensible, and slender filaments in Stokes flow
    Prof. Aleksandar Donev (Courant Institute, New York University)
    16/05/2023, 10:50
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  8. 135. Should we keep choosing nano-sized particles to kinetically stabilize co-continuous blends?
    Rajas Shah (University of Calgary)
    16/05/2023, 10:50
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  9. 153. Lubrication force between two approaching cylinders in a Bingham fluid
    Anthony Wachs (University of British Columbia)
    16/05/2023, 11:10
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  10. 120. Primary cementing of horizontal wells: laminar displacement flows in obstructed eccentric annuli
    Ms Marzieh Alishahi (University of British Columbia)
    16/05/2023, 11:10
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  11. 65. RHEOLOGICAL AND CONDUCTIVE PROPERTIES OF INJECTION- AND COMPRESSION-MOLDED CARBON NANOTUBE POLYMER COMPOSITES
    Lidija Slemenik Perše
    16/05/2023, 11:10
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  12. 44. TRIBOLOGY AND RHEOLOGY OF HYALURONIC ACID BASED CELLULOSE NANOCRYSTAL SUSPENSIONS
    Akshai Bose
    16/05/2023, 11:10
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  13. 194. Cementing displacement flows of shear-thinning fluids in horizontal wells, with and without casing rotation
    Dr Alondra Renteria (UBC, Mechanical Engineering)
    16/05/2023, 11:30
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  14. 159. Cross Flow Filtration of Viscoplastic Suspensions, a Robust Mathematical Model
    Mahdi Izadi
    16/05/2023, 11:30
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  15. 148. Self-organized cable formation and force transmission in an active vertex model for biological tissues
    Mingfeng Qiu (Ecole Normale Supérieure)
    16/05/2023, 11:30
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  16. 10. Displacement flows of shear thinning fluids in a vertical annulus
    Ruizi Zhang (University of British Columbia)
    16/05/2023, 11:50
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  17. 164. IMPARTING EXTENSIBILITY TO JAMMED COLLOIDAL INKS FOR DIRECT-INK-WRITING PRINTABILITY
    Dr Chaimongkol Saengow (University of Illinois Urbana-Champaign)
    16/05/2023, 11:50
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  18. 199. SLUDGE RHEOLOGY AND ITS APPLICATIONS IN SLUDGE TREATMENT PROCESSES
    Nicky Eshtiaghi (RMIT University)
    16/05/2023, 12:50
    Plenary Talk
    Plenary Talk
    Plenary Presentations

    Abstract:
    Sludge rheology is important for the design and operation of sludge treatment processes in terms of process optimisation and maintenance cost reduction. Sludge rheology has a significant impact on the performance of pumps, anaerobic digesters, dewaterability equipment, mixers, and heat exchangers.
    A large portion of the total energy consumption in any sludge treatment plants...

    Go to contribution page
  19. 131. Formulating adhesives with aminated polyolefins for low surface energy substrate
    Ziyue Zhang (The University of British Columbia)
    16/05/2023, 14:00
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  20. 40. KEYNOTE: Bioprinting of collagen hydrogels in supported gel environment
    Prof. Yaman Boluk (University of Alberta)
    16/05/2023, 14:00
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  21. 56. KEYNOTE: The Role of Rolling Resistance in the Rheology of Wizarding Quidditch Ball Suspensions
    Sarah Hormozi (Cornell University)
    16/05/2023, 14:00
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  22. 102. WALL-SLIP EFFECTS ON FLOW RESTART IN A PLUGGED WAXY CRUDE OIL PIPELINE
    Dr Aniruddha Sanyal (National Institute of Technology Calicut)
    16/05/2023, 14:00
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  23. 174. CONFORMATIONAL RELAXATION OF STYRENE-BUTADIENE RUBBERS HAVING A DIFFERENT MICROSTRUCTURE BUT THE SAME COMPOSITION AT HYDROPHILIC AND HYDROPHOBIC INTERFACE
    Mr Hidenobu Taneda (Center for Polymer Interface and Molecular Adhesion Science, Kyushu Univeristy)
    16/05/2023, 14:20
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  24. 104. FLOW RESTART MECHANISM IN A MULTIPHASE GELLED PIPELINE
    Dr Lomesh Tikariha (IIT Bombay)
    16/05/2023, 14:20
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  25. 136. Adjuvanted silica suspensions: from particles contact properties to rheology
    Xavier Chateau (ENPC, France)
    16/05/2023, 14:40
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  26. 22. EFECTS OF GELATION CONCENTRATION ON CYCLIC DEFORMATION BEHAVIOR OF POLYSACCHARIDE HYDROGELS
    Jun-ichi Horinaka
    16/05/2023, 14:40
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  27. 149. SHAPE MEMORY AND MECHANO-RHEOLOGICAL PROPERTIES OF AMINE CONTAINING POLYETHYLENE/POLYCAPROLACTONE BLEND
    Jan Gustowski (University of British Columbia)
    16/05/2023, 14:40
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  28. 100. Rheological Evaluation of Polyhydroxyalkanoates (PHAs) through Constitutive Equation Modelling
    Ehsan Behzadfar (Toronto Metropolitan University)
    16/05/2023, 15:00
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  29. 109. Rheology of High Performace Cement-Based Materials For Use in Additive Manufacturing
    Nicos Martys (National Institute of Standards and Technology)
    16/05/2023, 15:00
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  30. 70. TENDON FASCICLE-INSPIRED COLLAGEN MULTIFILAMENT BUNDLE PRODUCED BY MULTI-PIN CONTACT DRAWING OF AN AQUEOUS COLLAGEN-POLYETHYLENE OXIDE SOLUTION
    Dr Hessameddin Yaghoobi (Department of Physics & Atmospheric Science, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada and School of Biomedical Engineering, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada)
    16/05/2023, 15:00
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  31. 125. Development of Biodegradable and Antiviral Surgical Face Masks from Poly(lactic acid) and Poly(dimethyl siloxane)-based Polyhydroxyurethanes
    Dr Georges Younes (Polytechnique de Montréal)
    16/05/2023, 15:20
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  32. 123. EFFECT OF HOMOGENIZATION OF RAW MILK ON THE PHYSICAL PROPERTIES OF AGED CHEESE
    Prof. Isamu Kaneda (Rakuno Gakuen University)
    16/05/2023, 15:20
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  33. 155. EXPLORING THE INTERPLAY BETWEEN INTERPARTICLE FORCES, RHEOLOGY, AND TRIBOLOGY IN NANOCLAY-BASED NANOLUBRICANTS
    Leonardo Martín Alarcón (University of Calgary)
    16/05/2023, 15:20
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  34. 55. KEYNOTE: Normal stresses at the yielding point
    Prof. Paulo de Souza Mendes (PUC-Rio)
    16/05/2023, 16:10
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  35. 13. KEYNOTE: Rheology of active colloids: motility-induced shear-thickening
    Hartmut Löwen
    16/05/2023, 16:10
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  36. 99. Reversal motion of E-coli bacteria in nematic liquid crystals
    Dr Martyna Goral (Department of Mathematics, UBC, Vancouver, Canada and PMMH lab, ESPCI-PSL Paris, France)
    16/05/2023, 16:10
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  37. 91. RHEOLOGY OF BIOCOMPOSITES
    Denis Rodrigue
    16/05/2023, 16:10
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  38. 49. DIFFUSION OF LIPID NANOPARTICLES THROUGH AIRWAY MUCUS
    Mohammad Reza Rokhforouz (UBC Chemical and Biological Engineering)
    16/05/2023, 16:30
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  39. 11. How morphological and rheological properties of PLA/MWCNT nanocomposites are affected by molecular weight, stereo configuration of PLA, and processing
    Prof. Pierre Carreau (Center for High Performance Polymer and Composite systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montreal, Québec, H3T 1J4, Canada)
    16/05/2023, 16:30
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  40. 18. Compatibilized polylactide/polyamide 11 (PLA/PA11) blends containing multiwall carbon nanotubes: morphology, rheology, electrical and mechanical properties
    Ms Zeinab Mousavi (Centre for High performance Polymer and Composite Systems (CREPEC), Chemical Engineering Department, Polytechnique Montreal, Montreal, Quebec H3T 1J4, Canada)
    16/05/2023, 16:50
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  41. 146. Continuous Monitoring of Yield Stress and Solid Fraction of a Solid Suspension Using a Microfluidic Yield Rheometer
    Mr Durgesh Kavishvar (University of Toronto)
    16/05/2023, 16:50
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  42. 53. DENSITAXIS OF SWIMMING MICROORGANISMS
    Vaseem Shaik (University of British Columbia)
    16/05/2023, 16:50
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  43. 133. Oscillatory microfluidic thromboelastograph (micro-TEG) analysis of whole blood coagulation and fibrinolysis
    Prof. SeHyun ‍SHIN (Korea University)
    16/05/2023, 16:50
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  44. 167. Hercshel-Bulkley parameter evaluation of oil-based drilling fluids
    Prof. Arild Saasen (University of Stavanger)
    16/05/2023, 17:10
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  45. 72. Hydrodynamic interactions of active matter near boundaries
    Seyed Arman Abtahi
    16/05/2023, 17:10
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  46. 156. SCALE-DEPENDENT RHEOLOGY OF SYNOVIAL FLUID LUBRICATING MACROMOLECULES
    Leonardo Martín Alarcón (University of Calgary)
    16/05/2023, 17:10
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  47. 32. WHY IS THE PYANE EFFECT MISSING HIGHER HARMONICS?
    Prof. Xiaorong Wang (Tongji University)
    16/05/2023, 17:10
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  48. 97. An algebraic thixotropic elasto-viscoplastic model for describing pre-yielding and post-yielding behaviour
    Lalit Kumar (Indian institute of Technology Bombay)
    16/05/2023, 17:30
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  49. 147. DYNAMICS OF 2D COLLOIDAL CRYSTALS IN THE PRESENCE OF LOCALIZED INTERNAL STRESSES CREATED BY ACTIVE PARTICLES
    Dr Jacob John (Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Canada)
    16/05/2023, 17:30
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  50. 80. EFFECT OF INORGANIC FILLER ON RHEOLOGICAL PROPERTIES AND MORPHOLOGY OF POLYLACTIC ACID(PLA)/LOW-DENSITY POLYETHYLENE(LDPE) BLENDS
    Min Chan Kim (Pusan National University (Republic of Korea))
    16/05/2023, 17:30
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  51. 160. RHEOLOGY OF CORN STOVER SLURRIES UNDERGOING DILUTE-ACID PRETREATMENT
    Prof. Joseph Samaniuk (Colorado School of Mines)
    16/05/2023, 17:30
    Biomaterials and Biological Systems
    Oral Presentation
    Biomaterials and Biological Systems
  52. 190. Active Particles Crossing Sharp Viscosity Gradients
    Jiahao Gong
    16/05/2023, 19:00
    Self-assembly and Flow-induced Systems and Gels
    Poster Presentation
    Poster Session
  53. 98. ADVANCES IN CONE-PLATE RHEOMETERS FOR BUSY LABS
    David Moonay
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  54. 195. Capillary imbibition in a diverging flexible channel
    Mouad Boudina (University of British Columbia)
    16/05/2023, 19:00
    Self-assembly and Flow-induced Systems and Gels
    Poster Presentation
    Poster Session
  55. 191. Deformational Vorticity in Constitutive Equations: The Co-Rigid Rotational Maxwell Model
    Cody Mischel
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  56. 181. DEVELOPMENT OF EXTENSIONAL RHEOMETER USING PARALLEL DISK RING
    Mr Yukihiro Mineyama (National Institute of Technology, Tsuyama College, Advanced Mechanical and Control System Engineering Course)
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  57. 189. Diagnosing the state of the battery slurries using a machine learning technique
    Seunghoon ­Kang
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  58. 175. DYNAMIC VISCOELASTICITY AND SPINNING BEHAVIOR OF AN ORGANOGELATOR, PMDA-R, DISSOLVED IN VARIOUS OILS
    Aya Kaide (Yamaguchi University)
    16/05/2023, 19:00
    Self-assembly and Flow-induced Systems and Gels
    Poster Presentation
    Poster Session
  59. 200. Dynamical behavior of an aqueous foam in a liquid-filled Hele-Shaw cell
    Fatemeh Bararpour
    16/05/2023, 19:00
    Poster Session
    Poster Presentation
    Poster Session
  60. 177. Effect of Asphaltene on the Rheological Properties of Bitumen
    Jourdain Piette (UBC)
    16/05/2023, 19:00
    Rheology in the Oil and Gas Industry
    Poster Presentation
    Poster Session
  61. 185. EFFECT OF CARBON NANOTUBES (CNTs) DISPERSITY IN AG/POLYDIMETHYLSILOXAN (PDMS) COMPOSITE CONDUCTORS
    EunHui Jeong
    16/05/2023, 19:00
    Blends, Composites and Nanocomposites
    Poster Presentation
    Poster Session
  62. 182. EFFECT OF THE TEMPERATURE ON THE RHEOLOGICAL BEHAVIORS OF LITHIUM-ION BATTERIES ANODE SLURRY
    예슬 김 (Sookmyung Women's University)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  63. 172. EFFECTS OF RELAXATION TIME OF POLYMER SOLUTIONS ON THE SPATIO-TEMPORAL FLUCTUATION IN A TWO-DIMENSIONAL FLOW
    Kengo Fukushima
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  64. 116. EVALUATION OF THE LIQUID HOLDUP IN A STRATIFIED GAS-LIQUID INCLINED PIPELINE ACCORDING TO THE HERSCHEL–BULKLEY FLUID MODEL
    Prof. Jingyu Xu (Institute of Mechanics, Chinese Academy of Science)
    16/05/2023, 19:00
    Rheology in the Oil and Gas Industry
    Poster Presentation
    Poster Session
  65. 188. Gelatinization of Individual Starch Granules
    Lanxin Mo (University of British Columbia)
    16/05/2023, 19:00
    Polymer Solutions and Melts
    Poster Presentation
    Poster Session
  66. 85. IMPACT OF EXTENT OF DIGESTION ON THE SHEAR RHEOLOGICAL BEHAVIOUR OF ANAEROBIC DIGESTED SLUDGE
    Prof. Nicky Eshtiaghi (RMIT University, Australia)
    16/05/2023, 19:00
    Biomaterials and Biological Systems
    Poster Presentation
    Poster Session
  67. 178. INFLUENCE OF VISCOSITY HIERARCHY ON DENSITY-UNSTABLE FLUID-FLUID DISPLACEMENT IN VERTICAL CONCENTRIC ANNULI
    Maryam Ghorbani (PhD student)
    16/05/2023, 19:00
    Rheology in the Oil and Gas Industry
    Poster Presentation
    Poster Session
  68. 186. JAMMING MECHANISMS OF DILUTE FIBRE SUSPENSIONS UNDER DEAD-END AND CROSS-FLOW CONDITIONS
    Mr Miguel Esteban Villalba Chehab (The University of British Columbia)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  69. 173. Measuring Transient Extensional Viscosity using Filament Stretching on an ARES G2 Rheometer
    Tianhong Chen (TA Instruments - Waters LLC)
    16/05/2023, 19:00
    Industrial Rheology in Polymer Processing
    Poster Presentation
    Poster Session
  70. 180. Microrheology of Polyelectrolyte Solutions in the Semidilute Entangled Regime
    Atsushi Matsumoto (University of Fukui)
    16/05/2023, 19:00
    Polymer Solutions and Melts
    Poster Presentation
    Poster Session
  71. 176. OPTIMIZATION OF THE DRAG-REDUCING EFFECT BY CONTROLLING THE PREPARATION CONDITIONS OF ADDITIVES
    Takashi Saeki (Yamaguchi University)
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  72. 144. PREDICTICTING THE RATE OF CEMENT PLUG FAILURE
    Scott Charabin (UBC)
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  73. 183. Rheological differences in anode slurries caused by shape difference between natural and synthetic graphite
    Yeeun Kim (Sookmyung Women’s University)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  74. 170. RHEOLOGICAL METHOD TO INVESTIGATE PSEUDOLAYER COMPRESSION ELASTIC CONSTANT AND THE DYNAMICS OF THE TWIST-BEND NEMATIC LIQUID CRYSTAL
    mylapalli praveen kumar (University of Hyderabad)
    16/05/2023, 19:00
    Non-Newtonian Fluid Mechanics and Stability
    Poster Presentation
    Poster Session
  75. 21. Rheology and Drag Reduction and Engineering Applications of Novel Oil-phase Suspended Polyacrylamide Slicker water Fracturing Fluids
    Mr Yongjun Lu (Petrochina Research Institute of Exploration and Development)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  76. 187. Rheology and Self-Assembly of Carboxylated Cellulose Nanocrystals
    Ms Madeleine Hallman (Department of Chemical and Biological Engineering, University of British Columbia)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  77. 184. TWO-STEP YIELDING BEHAVIOR OF CONCENTRATED LITHIUM-ION BATTERY ANODE SLURRY
    Jun Dong Park (Sookmyung Women's University)
    16/05/2023, 19:00
    Suspensions and Colloids
    Poster Presentation
    Poster Session
  78. 50. COMPARISON OF VISCOELASTIC AND DIELECTRIC PROPERTIES OF TYPE-A CHAIN: EXPERIMENTAL ATTEMPT FOR DEEPER UNDERSTANDING OF POLYMER RHEOLOGY
    Hiroshi Watanabe
    17/05/2023, 09:00
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Plenary Presentations

    Abstract:

    Viscoelastic and dielectric properties of type-A chains differently average the same chain
    dynamics, so that comparison of those properties resolves some details of this dynamics in a purely experimental way. Some examples of this comparison are presented in the talk.

    Bio:
    Hiroshi Watanabe started his academic career as Assistant Professor in 1983 in Osaka University,...

    Go to contribution page
  79. 76. DRIFT FLUX MODELING OF GAS RELEASE IN OIL SAND TAILING PONDS
    Omid Hajieghrary (University of British Columbia)
    17/05/2023, 10:30
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  80. 43. KEYNOTE: RESPONSE OF BLOCK COPOLYMER ELECTROLYTES TO IONIC CURRENT
    Nitash P. BALSARA (UC Berkeley)
    17/05/2023, 10:30
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  81. 86. KEYNOTE: Role of network compressibility on the complex conductivity of structured polyelectrolyte hydrogels
    Reghan Hill (McGill University)
    17/05/2023, 10:30
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  82. 152. RHEOLOGY OF FRESH CEMENT PASTE AS AFFECTED BY CELLULOSE NANOFIBRES AND SUPERPLASTICIZER
    Dr VIVEK BINDIGANAVILE (UNIVERSITY OF ALBERTA)
    17/05/2023, 10:50
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  83. 92. DEFYING GRAVITY: THE FLUID MECHANICS OF OFF-BOTTOM PLUG PLACEMENT
    Ida Karimfazli (Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada)
    17/05/2023, 11:10
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  84. 101. GLASS TRANSITION AND ENTANGLEMENT IN SEMIFLEXIBLE CONJUGATED POLYMER MELTS
    Ralph Colby
    17/05/2023, 11:10
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  85. 108. ULTRASOUND EFFECT ON DISPERSION AND DISTRIBUTION OF GRAPHITIC MATERIALS INSIDE DIFFERENT PDMS
    Nicole Demarquette (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)
    17/05/2023, 11:10
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  86. 130. FLUID COMPOSITES AS ALTERNATIVES TO SOLID ELECTRICAL COMPONENTS
    Dr Lola Gonzalez-Garcia (INM-Leibniz Institute for New Materials)
    17/05/2023, 11:30
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  87. 47. Nano Rheology of Glassy Materials using Dielectric Molecular Probe
    Tadashi Inoue (Osaka University)
    17/05/2023, 11:30
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  88. 7. RHEOLOGICAL BEHAVIOR OF MATURE FINE TAILINGS
    Mr Amir Malmir (The University of British Columbia)
    17/05/2023, 11:30
    Rheology in the Oil and Gas Industry
    Oral Presentation
    Rheology in the Oil and Gas Industry
  89. 197. Profile of Hiroshi Watanabe
    Tadashi Inoue (Osaka University), Dr Yumi Matsumiya (ICR, Kyoto University)
    17/05/2023, 11:50
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  90. 193. THE RHEOLOGICAL PROPERTIES OF HOT MELT ADHESIVES DOPED WITH CARBON NANOTUBES
    Dr Paulina Latko-Durałek (Warsaw University of Technology)
    17/05/2023, 11:50
    Blends, Composites and Nanocomposites
    Oral Presentation
    Blends, Composites and Nanocomposites
  91. 57. Coating process for battery electrode
    Jaewook Nam (Seoul National University)
    17/05/2023, 12:50
    Plenary Talk
    Plenary Talk
    Plenary Presentations

    Abstract:
    For next-generation electronics systems and devices, such as flexible displays and energy harvesting (or storage) devices, high performance, versatility, and flexibility are frequently necessary. A film, which is often a polymer or soft substrate with numerous layers of electrically conductive, semiconducting, and insulating materials superimposed on it, is a key component of...

    Go to contribution page
  92. 30. KEYNOTE: COMPUTATIONAL ROD CLIMBING AND DIPPING DEPENDENT UPON NORMAL STRESSES
    Youngdon Kwon
    17/05/2023, 14:00
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  93. 107. KEYNOTE: Shear thickening in dense suspensions of rigid rods
    George Petekidis (IESL-FORTH, Crete, Greece)
    17/05/2023, 14:00
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  94. 48. Simulation of Competition between Reaction and Relaxation in Gelation Kinetics
    Takashi Uneyama (Nagoya University)
    17/05/2023, 14:00
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  95. 105. VISCOELASTIC PROPERTIES OF BIDISPERSE LINEAR POLYMERS UNDER ELONGATIONAL FLOW
    Prof. van Ruymbeke Evelyne (Bio and Soft Matter, UClouvain)
    17/05/2023, 14:00
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  96. 113. Dual slip-link simulation study on stretch-orientation-induced reduction of friction in bi-disperse blends
    Takashi Taniguchi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)
    17/05/2023, 14:20
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  97. 33. Quantifying the Enhancement Effect of Strain Induced Crystallization on Tearing Energy by Edge Crack Test Method
    Katsuhiko Tsunoda
    17/05/2023, 14:20
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  98. 62. Alignment of wormlike micelles under shear flow: Comparison with polymers
    Yusuke Koide (Osaka University)
    17/05/2023, 14:40
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  99. 122. Elongation viscosity of a poly(styrene-b-2-vinylpyridine) block copolymer forming spherical microphage-separated structure
    Yuya Doi (Nagoya University)
    17/05/2023, 14:40
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  100. 38. Flow-induced structural change of cathode slurry during storage and its mechanism
    Mr Jeong Hoon Park (School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Korea)
    17/05/2023, 14:40
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  101. 36. REVEALING THE CORRELATION BETWEEN STRAIN-INDUCED CRYSTALLIZATION AND LOCAL STRAIN FIELD AROUND THE CRACK-TIP OF NATURAL RUBBER
    Dr Thanh-Tam MAI (​​Kyoto University, Kyoto, Japan)
    17/05/2023, 14:40
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  102. 45. Cluster formations of terminal groups of polyisoprenes in natural rubbers: Molecular dynamics simulation study
    Dr Taniguchi Takashi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)
    17/05/2023, 15:00
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  103. 140. MOLECULAR DYNAMICS SIMULATION OF THE BEHAVIOR OF THIN LUBRICATION FILM
    Dongjie Liu
    17/05/2023, 15:00
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  104. 103. PRACTICAL RHEOMETRY FOR SUSPENSIONS AND OTHER FUN COMPLEX SYSTEMS
    David Moonay
    17/05/2023, 15:00
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  105. 14. Primitive chain network simulations for non-linear rheology of monodisperse polystyrene melts with friction change and violation of the fluctuation-dissipation theorem.
    Prof. Yuichi Masubuchi (Nagoya University)
    17/05/2023, 15:00
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  106. 39. DIVERCITY IN STRAIN-INDUCED CRYSTALLIZATION OF NATURAL RUBBER BY BIAXIAL ELONGATION
    Shinichi Sakurai
    17/05/2023, 15:20
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  107. 15. Effect of viscosity contrast in structure -rheology relationship in sheared lamellar mesophase in 3-D
    Arkaprava Pal (IISc Bangalore)
    17/05/2023, 15:20
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  108. 60. UNIVERSALITY OF POLYMER MELTS
    quan chen (Changchun institute of applied chemistry chinese academy of science)
    17/05/2023, 15:20
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  109. 132. YIELD AND FLOW IN AGGREGATED PARTICULATE SUSPSENSIONS IN WATER
    Dr Anthony Stickland (The University of Melbourne)
    17/05/2023, 15:20
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  110. 129. INFLUENCES OF SHAPE OF MOLECULAR WEIGHT DISTRIBUTION ON TENSILE PROPERTIES OF POLYETHYLENE SOLIDS
    Takumitsu Kida (Japan Advanced Institute of Science and Technology)
    17/05/2023, 16:10
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  111. 74. KEYNOTE: Psychorheology: toward understanding how we experience viscous and viscoelastic materials
    Dr Jeffrey Martin (Johnson & Johnson Consumer Inc.)
    17/05/2023, 16:10
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  112. 81. KEYNOTE: Relationships between viscoelastic relaxation and network connectivity in transient networks with well-controlled network structures
    Takuya Katashima (The University of Tokyo)
    17/05/2023, 16:10
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  113. 16. RHEO-DIELECTRIC BEHAVIOR OF UNENTANGLED POLY (BUTADIENE OXIDE) UNDER STEADY SHEAR
    Dr Yumi Matsumiya (ICR, Kyoto University)
    17/05/2023, 16:10
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  114. 119. EXPERIMENTAL STUDY ON PHASE SEPARATION DYNAMICS OF UNENTANGLED POLYMER BLEND WITH DYNAMIC ASYMMETRY
    Dr Takeshi Sato (Institute for Chemical Research, Kyoto University, Kyoto, Japan)
    17/05/2023, 16:30
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  115. 157. LINKING MULTISCALE RHEOLOGY TO PERFORMANCE OF HIERARCHICALLY STRUCTURED PEM FUEL CELL CATALYST LAYER
    Min-Hyung Markus Lee (University of Calgary)
    17/05/2023, 16:30
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  116. 128. Inertial flow of immersed elastic capsules through a corner
    Damien Huet
    17/05/2023, 16:50
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  117. 84. Modelling drop mobility on lubricated surfaces using a ternary free energy lattice Boltzmann algorithm
    Dr Sirio Orozco-Fuentes (Northumbria University)
    17/05/2023, 16:50
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  118. 58. Phantom chain simulations for tetra and tri-branched networks
    Prof. Yuichi Masubuchi (Nagoya University)
    17/05/2023, 16:50
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  119. 78. Simulation study of unentangled polymers under fast flow
    Jun-ichi Takimoto
    17/05/2023, 16:50
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  120. 111. Analysis of pulsatile flows of complex fluids in two-dimensional channels
    Ms Nayeon Park (Seoul National University)
    17/05/2023, 17:10
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  121. 73. Molecular Dynamics Simulations for Viscosity Growth and Conformations of Unentangled Polymers under Shear Flow
    Takashi Uneyama (Nagoya University)
    17/05/2023, 17:10
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  122. 63. Negative energy elasticity in polymer gel elasticity
    Takamasa Sakai (The University of Tokyo)
    17/05/2023, 17:10
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  123. 196. Slip Behaviour and Thixotropy of Kaolinite and Mature Fines Tailings
    Jourdain Piette (UBC)
    17/05/2023, 17:10
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  124. 117. Solving the closure problem for dilute polymer solutions
    Prof. Santosh Ansumali (Jawaharlal Nehru Centre for Advanced Scientific Research)
    17/05/2023, 17:30
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  125. 87. Universal Equation of State of Osmotic Pressure for Polymer Gels
    Mr Takashi Yasuda (The University of Tokyo, Japan)
    17/05/2023, 17:30
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  126. 34. Z-SHAPED DEJAMMING PHASE DIAGRAM OF COLLOIDAL GELS
    Mr Bin Xia (Tongji University)
    17/05/2023, 17:30
    Suspensions and Colloids
    Oral Presentation
    Suspensions and Colloids
  127. 68. JNNFM Walters Award Lecture: Viscoplastic Fingers and Fractures in a Hele-Shaw Cell
    Thomasina Ball (University of Warwick)
    18/05/2023, 09:00
    Plenary Talk
    Oral Presentation
    Plenary Presentations

    Abstract:
    Radial displacement flows of viscoplastic fluid in a Hele-Shaw cell can give rise to a range of instabilities. Theoretically, the viscoplastic version of the Saffman-Taylor interfacial instability [1] is predicted to occur when the yield-stress fluid is displaced by a Newtonian one. The interface is expected to remain stable, however, if the yield-stress fluid displaces the...

    Go to contribution page
  128. 166. Controlled Collision of Hele-Shaw Droplets in Extensional Flow Using a Six-Port Microfluidic Device
    Aysan Razzaghi (University of Toronto)
    18/05/2023, 10:30
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  129. 5. KEYNOTE: Nonlinear Rheology of Concentrated Poly(vinyl alcohol)/Borax Aqueous Solution
    Quan Chen (Changchun Institute of Applied Chemistry, Chinese Academy of Science)
    18/05/2023, 10:30
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  130. 6. KEYNOTE: Rheology modification of polymeric networks via loop threading
    Dimitris Vlassopoulos (FORTH and University of Crete)
    18/05/2023, 10:30
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  131. 64. Rheological effects on purely-elastic flow asymmetries in the cross-slot geometry
    Arisa Yokokoji (Okinawa Institute of Science and Technology, Okinawa, Japan)
    18/05/2023, 10:30
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  132. 162. Bubbles in Yield Stress Fluids: Link between the Rheology and Stability of Bubbles
    Masoud Daneshi (Department of Mathematics, University of British Columbia)
    18/05/2023, 10:50
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  133. 26. FLOW OF A WORMLIKE MICELLAR SOLUTION OVER A LONG CAVITY
    Mr Fabian Hillebrand (Okinawa Institute of Science and Technology Graduate University)
    18/05/2023, 10:50
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  134. 66. EFFECTS OF CHANNEL LENGTH IN EXPANSION PARTS ON FLOW REGIMES OF POLYMER SOLUTION IN CONSECUTIVE ABRUPT CONTRACTION-EXPANSION CHANNELS
    Prof. Ruri Hidema (Kobe University)
    18/05/2023, 11:10
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  135. 29. Hystereses In One-dimensional Compression Of A Poroelastic Hydrogel
    Zelai Xu (University of British Columbia)
    18/05/2023, 11:10
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  136. 179. PREPARATION AND PROPERTIES OF CONDUCTIVE FOAMS VIA HIGH INTERNAL PHASE EMULSION
    Prof. Seong Jae Lee (The University of Suwon)
    18/05/2023, 11:10
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  137. 114. Time-Strain Separability and Inseparability in Multiaxial Stress Relaxation of Polymer Gels with Permanent and Transient Crosslinks
    Kenji Urayama
    18/05/2023, 11:10
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  138. 124. Instabilities in immiscible multi-layer viscous shear flows in the presence of interfacial slip
    Anna Katsiavria (Imperial College London)
    18/05/2023, 11:30
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  139. 115. INTRIGUING MELTING BEHAVIOR OF THE NATURAL RUBBER CRYSTAL FORMED BY STRAIN-INDUCED CRYSTALLIZATION
    Shinichi Sakurai
    18/05/2023, 11:30
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  140. 25. NONLINEAR RHEOLOGY OF ENTANGLED WORMLIKE MICELLES: A SLIP-SPRING SIMULATION STUDY
    Dr Takeshi Sato (Institute for Chemical Research, Kyoto University)
    18/05/2023, 11:30
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  141. 23. Shear-triggered Coalescence
    Alireza Mashayekhi (University of British Columbia)
    18/05/2023, 11:30
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  142. 168. A New Instrument for Interfacial Dilational Rheology
    Yun-Han Huang (University of British Columbia)
    18/05/2023, 11:50
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  143. 37. COUPLING A IONIC SURFACTANT AND A DRUG SALT: EQUILIBRIUM CHARACTERISTIC PARAMETERS & STRAIN HARDENING IN START-UP FLOW
    Prof. Nino Grizzuti (Università degli Studi di Napoli Federico II)
    18/05/2023, 11:50
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  144. 198. EFFECT OF ULTRASOUND FIELDS ON ASPHALTENE-LADEN W/O INTERFACES: A MICRORHEOLOGY APPROACH
    Razie Khalesi Moghaddam (university of calgary)
    18/05/2023, 11:50
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  145. 17. Have you ever listened to the sound of the fluid?
    Prof. Kyung Hyun Ahn (Seoul National University)
    18/05/2023, 11:50
    Hiroshi Watanabe – Honorary Symposium
    Oral Presentation
    Hiroshi Watanabe – Honorary Symposium
  146. 8. ADVANCED POLYMER RHEOLOGY BASED ON RHEO-OPTICAL TOOLS AND A DUAL MOTOR DEVICE
    Joerg Laeuger (Anton Paar Germany)
    18/05/2023, 14:00
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  147. 20. Effect of salt concentration and flow rate on clogging dynamics in the single micro-pore
    Dae Yeon Kim (Seoul National University (SNU))
    18/05/2023, 14:00
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  148. 51. GAS PROPAGATION THROUGH POROUS MEDIA FILLED WITH YIELD-STRESS FLUID
    Ali Pourzahedi
    18/05/2023, 14:00
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  149. 154. KEYNOTE: Squeezing of a concentrated emulsion with surfactant through a periodic porous medium
    Alexander Zinchenko (University of Colorado Boulder)
    18/05/2023, 14:00
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  150. 110. Localization of stirring flows: the effect of the yield stress
    Mohammad Reza Daneshvar Garmroodi (Concordia University)
    18/05/2023, 14:20
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  151. 54. Star-polymer-DNA gels showing predictable stress relaxation behavior
    Xiang Li (Hokkaido University)
    18/05/2023, 14:20
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  152. 69. UNIVERSAL DIFFUSION OF DENDRIMERS IN SEMIDILUTE SOLUTIONS OF LINEAR POLYMERS
    Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University)
    18/05/2023, 14:20
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  153. 143. OBSERVATION OF FLOW BIREFRENGENCE IN DYNAMIC SQUEEZE FLOW
    Manabu Kato (National Institute of Technology, Tsuyama College)
    18/05/2023, 14:40
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  154. 46. The effect of surface viscosity on droplet breakup and relaxation under extensional flow
    Prof. Vivek Narsimhan (Davidson School of Chemical Engineering Purdue University)
    18/05/2023, 14:40
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  155. 82. The Effect of the Solvent Dielectric Constant on the Conformation and Dynamics of Polyelectrolytes in Solution
    Atsushi Matsumoto (University of Fukui)
    18/05/2023, 14:40
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  156. 151. Thin-film flow of a Bingham fluid over topography with a temperature dependent rheology
    Miguel Moyers
    18/05/2023, 14:40
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  157. 77. Damping of surface waves by a floating viscoplastic plate
    Xuemeng Wang (University of British Columbia)
    18/05/2023, 15:00
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  158. 165. Flow and instability induced by bubbles rising in a two-layer fluid system
    Marjan Zare (University of British Columbia)
    18/05/2023, 15:00
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  159. 161. RECENT ADVANCES IN POLYMER VISCOELASTICITY FROM GENERAL RIGID BEAD-ROD THEORY
    Prof. Alan Jeffrey Giacomin (Queen's University)
    18/05/2023, 15:00
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Polymer Solutions and Melts
  160. 88. SAXS, SANS and Spectroscopy Study on High Tunability of a Block Copolymer by Strongly Selective Solvents
    Prof. Shigeru Okamoto (Nagoya Institute of Technology)
    18/05/2023, 15:00
    Self-assembly and Flow-induced Systems and Gels
    Oral Presentation
    Self-assembly and Flow-induced Systems/Gels
  161. 145. DYNAMICS AND MIXING OF TRAPPED DROPLETS
    Gesse Roure (University of Colorado Boulder)
    18/05/2023, 15:20
    Emulsions and Foams
    Oral Presentation
    Emulsions, Foams and Bubbles
  162. 118. Improvement of Heat Resistance using Physical Aging in Polystyrene Injection Moldings
    Mr Kosaku Tao (1;Osaka Research Institute of Industrial Science and Technology. 2;Depertment of Material Science, School of Engineering, University of Shiga Prefecture.)
    18/05/2023, 15:20
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Polymer Solutions and Melts
  163. 90. Substrate colonization by an emulsion drop prior to spreading
    Arun Ramachandran (University of Toronto)
    19/05/2023, 09:00
    Plenary Talk
    Plenary Talk
    Plenary Presentations

    Abstract:

    In classical wetting, the spreading of an emulsion drop on a surface is preceded by the formation of a bridge connecting the drop and the surface across the sandwiched film of the suspending medium. However, this widely accepted mechanism ignores the finite solubility of the drop phase in the medium. We present experimental evidence of a new wetting mechanism, whereby the drop...

    Go to contribution page
  164. 67. KEYNOTE: Effect of local relaxation time on drag reduction in turbulent boundary layer flow of viscoelastic fluids
    Prof. Shinji Tamano (Nagoya Institute of Technology)
    19/05/2023, 10:30
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  165. 12. KEYNOTE: Modular material properties in bimodal blends of amine functionalized polyolefins
    Benjamin Yavitt (University of Cincinnati)
    19/05/2023, 10:30
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  166. 52. RHEOLOGICAL CHARACTERIZATION OF SUSPENSIONS GENERATED FROM COPPER ORES O VARYING MINERALOGICAL FEATURES AT GRINDING CONDITIONS
    Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering), Dr Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering)
    19/05/2023, 10:30
    Rheology in the Mining Industry
    Oral Presentation
    Rheology in the Mining Industry
  167. 112. Rheology-Driven Continuous In-Melt Separation of PET/PE Blends and Laminates: A Novel Approach to Recycling
    Joao Maia (Case Western Reserve University)
    19/05/2023, 10:30
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Industrial Rheology in Polymer Processing
  168. 61. Experimental Validation of Viscosity Homogenization Treatment System for Waste Plastic Recycling
    Mr Hiroki Endo (Dept. of Mechanical Engineering, Nagaoka University of Technology)
    19/05/2023, 10:50
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Industrial Rheology in Polymer Processing
  169. 127. Quantifying the effects of fines and clays on mineral tailings dewatering
    Anthony Stickland (The University of Melbourne)
    19/05/2023, 10:50
    Rheology in the Mining Industry
    Oral Presentation
    Rheology in the Mining Industry
  170. 9. DEVELOPMENT OF COMPOSITE VIA SECONDARY POLYMER-INDUCED PARTICLE AGGREGATION AND DESTRUCTION OF ITS PARTICLE AGGREGATION DURING 3D PRINTING
    JOUNG SOOK HONG
    19/05/2023, 11:10
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Industrial Rheology in Polymer Processing
  171. 59. Linear Viscoelastic Properties of Comb-Shaped Ring Polystyrenes
    Yuya Doi (Nagoya University)
    19/05/2023, 11:10
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  172. 134. Modelling high-pressure dewatering rolls for mineral tailings
    Nilanka Ekanayake (The University of Melbourne)
    19/05/2023, 11:10
    Rheology in the Mining Industry
    Oral Presentation
    Rheology in the Mining Industry
  173. 121. Turbulent drag reduction with flexible and rigid polymer solutions: from low to maximum drag reduction
    Rodrigo Mitishita (University of British Columbia)
    19/05/2023, 11:10
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability
  174. 83. ANALYSIS OF OPERATING LIMITS OF VACUUM-ASSISTED SLOT DIE COATING OF HERSCHEL-BULKLEY FLUIDS
    Myungjae Lee
    19/05/2023, 11:30
    Industrial Rheology in Polymer Processing
    Oral Presentation
    Industrial Rheology in Polymer Processing
  175. 139. Application of a robust self-healing experimental protocol for associating polymers
    Ms Nafiseh Moradinik (The University of British Columbia)
    19/05/2023, 11:30
    Polymer Solutions and Melts
    Oral Presentation
    Polymer Solutions and Melts
  176. 192. Influence of fluid type in the transition from spray to roping in hydrocyclones
    Fernando Betancourt (University of Concepción)
    19/05/2023, 11:30
    Rheology in the Mining Industry
    Oral Presentation
    Rheology in the Mining Industry
  177. 79. Relating elastoinertial turbulence to the phenomenology of polymer drag reduction
    Li Xi (McMaster University)
    19/05/2023, 11:30
    Non-Newtonian Fluid Mechanics and Stability
    Oral Presentation
    Non-Newtonian Fluid Mechanics and Stability