8th Pacific Rim Conference on Rheology

15 May 2023, 08:00 → 19 May 2023, 16:00 America/Vancouver

Mathematics & Geography Buildings (University of British Columbia, Point Grey Campus)

Ian Frigaard (University of British Columbia), Mariana Carrasco-Teja (University of British Columbia), Marjan Zare (University of British Columbia), Savvas Hatzikiriakos (The University of British Columbia)

The  8th Pacific Rim Conference on Rheology was held in Vancouver, on the Point Grey campus of the University of British Columbia (UBC)^*, May 15 – 19, 2023.

For more information about the event, please visit prcr2023.ca

---

Click here to download the program at a glance

---

CONFERENCE TRACKS:

General Symposia

G01. Polymer Solutions and Melts 
G02. Industrial Rheology in Polymer Processing 
G03. Blends, Composites and Nanocomposites 
G04. Suspensions and Colloids 
G05. Emulsions and Foams 
G06. Self-assembly and Flow-induced Systems and Gels 
G07. Biomaterials and Biological Systems 
G10. Non-Newtonian Fluid Mechanics and Stability 
G12. Rheology in the Oil and Gas Industry 
G13. Rheology in the Mining Industry

Special Symposia 
(By invitation only)

S02. Hiroshi Watanabe – Honorary Symposium

Poster Session

P01. Posters on any topic of rheological interest

 

---

*UBC Point Grey Campus is on the unceded Traditional Territory of the xʷməθkʷəy̓əm (Musqueam) People

---

Thank you to our sponsors!

df

Program at a glance_PRCR2023_MAY15.pdf

Abstract Templates

• Figure.png
• PRCR manuscript template 2022v2.docx
• PRCR_Template_2022v2.tex

Monday 15 May

18:00 → 21:00 Social Events: Casual Evening and Registrations

18:00 Registration with dinner and drinks at The Gallery

Conference registration will open in the Gallery Lounge & Patio (6133 University Blvd. UBC Campus) on Monday May 15 at 6:00 pm, which is a short stroll away from your accommodation. There will be dinner and drinks offered in the lounge up until around 10pm, with a nice patio to sit out on and reconnect with friends.

Tuesday 16 May

08:45 → 09:00 Opening Remarks

Ian Frigaard and Savvas Hatzikiriakos

Conveners: Ian Frigaard (University of British Colubia), Savvas Hatzikiriakos (The University of British Columbia)

09:00 → 10:00 Plenary Presentations: Simon A. Rogers, University of Illinois at Urbana-Champaign

Convener: Dimitris Vlassopoulos (FORTH and University of Crete)

09:00 What we learn about yielding from recovery rheology

Abstract:
Yield stress fluids are often thought about in a piecewise manner as behaving like elastic solids below the yield stress and like generalized Newtonian liquids above it. Accurate determination of the yield stress is therefore crucial to understanding and predicting the behaviour of yield stress fluids such as inks for 3D printing, foods and cosmetics, muds and soils, and many industrially and biologically relevant materials. Despite the centrality of the yield stress concept, there exist multiple methods by which researchers determine ‘the’ yield stress, and they can provide values that are orders of magnitude apart. Such discrepancies have even led to some asking the question of whether the yield stress exists at all.
In this work we study a series of yield stress fluids using recovery rheology concepts, where strain is decomposed into recoverable and unrecoverable components, and present evidence that yielding takes place gradually over a wider range of stresses than previously thought. It is shown that the overshoot in the loss modulus that has often been used as a measure of yielding is due to the acquisition of unrecoverable strain. It’s shown how these measurements led to the development of a model that describes spatially heterogeneous yielding in a mean-field manner and how accurately this model predicts the rheology of simple yield stress fluids.
In more complex materials, responses are observed with two overshoots in the loss modulus, a phenomenon often referred to as “double yielding”. It is shown that these dual features are really a combination of two distinct processes, only one if which is yielding. New protocols inspired by recovery concepts are also used to show that small amounts of flow occur below the yield stress determined by a Herschel-Bulkley fit to steady-shear flow measurements in a predictable manner as a function of stress amplitude, angular frequency, and applied stress phase angle. Relations are presented that show how these measures can be used to determine the contribution to the loss modulus from unrecoverable plastic deformations, providing some of the same information as the full iteratively performed recovery tests, but in a fraction of the time.
Recovery rheology therefore adds nuance to our understanding of yield stress fluids by highlighting the continuous nature of yielding and providing a general set of methods by which reliable and consistent yielding information can be rapidly obtained.

Bio: Simon A. Rogers is an Associate Professor in the Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, USA. Dr. Rogers uses experimental and computational tools to understand and model advanced colloidal, polymeric, and self-assembled materials. He received his BSc in 2001, BSc (Hons) in 2002; and his PhD from Victoria University of Wellington in New Zealand in 2011. He completed his postdoctoral research at the Foundation for Research and Technology in Crete, the Jülich Research Center in Germany, and the Center for Neutron Research at the University of Delaware.

Speaker: Simon Rogers (University of Illinois at Urbana-Champaign)

PRCR May 2023 Rogers.pdf

10:00 → 10:30 Coffee Break

10:30 → 12:10 Biomaterials and Biological Systems

Convener: Yaman Boluk (University of Alberta)

10:30 Poroelastic Modelling Reveals The Cooperation Between Two Mechanisms For Albuminuria

Speaker: Zelai Xu (University of British Columbia)

GBM_Abstract.pdf

10:50 Hydrodynamics and rheology of fluctuating, semiflexible, inextensible, and slender filaments in Stokes flow

Speaker: Prof. Aleksandar Donev (Courant Institute, New York University)

Abstract_31.pdf

11:10 TRIBOLOGY AND RHEOLOGY OF HYALURONIC ACID BASED CELLULOSE NANOCRYSTAL SUSPENSIONS

Speaker: Akshai Bose

Akshai_Bose_PRCR_abstract_2023.pdf

11:30 Self-organized cable formation and force transmission in an active vertex model for biological tissues

Speaker: Mingfeng Qiu (Ecole Normale Supérieure)

abstract_PRCR23.pdf

11:50 No talk scheduled

10:30 → 12:10 Blends, Composites and Nanocomposites

Convener: Reghan Hill (McGill University)

10:30 STUDY OF THE STABILITY OF ELECTRICAL AND RHEOLOGICAL PROPERTIES OF ELECTRICALLY CONDUCTIVE COMPOSITES WITH CO-CONTINUOUS MORPHOLOGY

Speaker: Ms Daria Strugova (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)

PRCR_2023_Vancouver_Strugova_D.docx

10:50 Should we keep choosing nano-sized particles to kinetically stabilize co-continuous blends?

Speaker: Rajas Shah (University of Calgary)

PRCR_Template_2022v2.pdf

11:10 RHEOLOGICAL AND CONDUCTIVE PROPERTIES OF INJECTION- AND COMPRESSION-MOLDED CARBON NANOTUBE POLYMER COMPOSITES

Speaker: Lidija Slemenik Perše

PRCP_2023_Abstract-LSP.pdf

11:30 No talk scheduled

10:30 → 12:10 Suspensions and Colloids

Convener: Sarah Hormozi (Cornell University)

10:30 Non-Brownian suspensions in pressure-driven flow: numerical simulations with frame-invariant sub-grid corrections

Speaker: Dr Michel Orsi (Levich Institute and Department of Chemical Engineering, CUNY City College of New York, New York, NY 10031, USA)

abstract.pdf

10:50 FINITE SYSTEM SIZE CORRECTION IN MICRORHEOLOGICAL ANALYSIS UNDER PERIODIC BOUNDARY CONDITIONS : A DIRECT NUMERICAL SIMULATION APPROACH

Speaker: Prof. Yasuya Nakayama (Kyushu University)

PRCR_Template_2022v2.pdf

11:10 Lubrication force between two approaching cylinders in a Bingham fluid

Speaker: Anthony Wachs (University of British Columbia)

PRCR2023_ChateauWachs.pdf

11:30 Cross Flow Filtration of Viscoplastic Suspensions, a Robust Mathematical Model

Speaker: Mahdi Izadi

PRCR_Template_2022v2.pdf

11:50 IMPARTING EXTENSIBILITY TO JAMMED COLLOIDAL INKS FOR DIRECT-INK-WRITING PRINTABILITY

Speaker: Dr Chaimongkol Saengow (University of Illinois Urbana-Champaign)

Saengow PRCR manuscript 2022.pdf

10:30 → 12:10 Rheology in the Oil and Gas Industry

Convener: Paulo de Souza Mendes (PUC-Rio)

10:30 KEYNOTE: Assessment of Critical Conditions Required for Effective Hole Cleaning in Horizontal Wells - Effects of Fluid Rheological Properties and Near Wall Turbulence on the Particle Removal From Bed Deposits

Speaker: Dr Ergun Kuru (University of Alberta)

Abstract-Kuru-PRCR.pdf

11:10 Primary cementing of horizontal wells: laminar displacement flows in obstructed eccentric annuli

Speaker: Ms Marzieh Alishahi (University of British Columbia)

PRIMARY CEMENTING OF HORIZONTAL WELLS LAMINAR DISPLACEMENT FLOWS IN OBSTRUCTED ECCENTRIC ANNULI.pdf

11:30 Cementing displacement flows of shear-thinning fluids in horizontal wells, with and without casing rotation

Speaker: Dr Alondra Renteria (UBC, Mechanical Engineering)

PRCR Renteria & Frigaard.pdf

11:50 Displacement flows of shear thinning fluids in a vertical annulus

Speaker: Ruizi Zhang (University of British Columbia)

Abstract_Ruizi.pdf

12:10 → 12:50 Lunch

12:50 → 13:50 Plenary Presentations: Nicky Eshtiaghi, RMIT University

Convener: Paulo de Souza Mendes (PUC-Rio)

12:50 SLUDGE RHEOLOGY AND ITS APPLICATIONS IN SLUDGE TREATMENT PROCESSES

Abstract:
Sludge rheology is important for the design and operation of sludge treatment processes in terms of process optimisation and maintenance cost reduction. Sludge rheology has a significant impact on the performance of pumps, anaerobic digesters, dewaterability equipment, mixers, and heat exchangers.
A large portion of the total energy consumption in any sludge treatment plants is used for pumping sludge within the treatment processes. The efficient operation of sludge pumps requires an accurate calculation of friction losses for which sludge rheological parameters is an important parameter. Rheological parameters change as composition changes due to season, origin and treatment process. Furthermore, the type of selected rheological model and data fitting process impact on the pressure drop calculation. A validated pressure drops calculation toolkit was developed with up to 10% errors against actual data collected both at industrial scale and a pilot plant of sludge pumping system in a range of solid concentrations of sludge.

Anaerobic digesters are used to treat sludge and produce biogas. The rheology of the sludge can affect the digestion process, as it can impact the ability of microorganisms to break down the organic matter in the sludge. Sludge with high viscosity may have a lower biodegradability, resulting in a longer retention time within the digester, which can increase the size and cost of the digester. Additionally, the rheology of the sludge can impact the efficiency of the mixing within the digester, affecting the biogas production and overall treatment performance. The impact of the extent of digestion in terms of the volatile solids destruction on rheological properties in semi-continuous pilot digesters is also presented. Experimental results from this study indicate that higher volatile solids destruction leads to increased difficulty to flow and dewater. Since rheological behaviour is interlinked with chemical organic content (COD) of sludge, On-line rheometers can be used to monitor this process performance indicator (COD) rather than conducting offline time consuming chemical tests.
There is still much to be learned about the complex interactions between different components in sludge, and that new measurement techniques will be needed to improve our understanding of sludge rheology and its applications in sludge treatment processes.

Bio:
Nicky ESHTIAGHI is a Professor of Chemical Engineering at RMIT University, an Engineers Australia (EA) Fellow and Chartered Engineer, a Fellow of the Higher Education Academy (FHEA, UK), and an Editor in Chemical Engineering Research and Design Journal (Q1, Elsevier). She was the President of Australian Society of Rheology (2020-2022). She leads Sustainable Waste Processing Laboratories which investigates the flow behaviour of solid residue (sludge) from wastewater treatment plants with the aim of optimizing the energy efficiency of processes in sludge treatment lines. She has extensive research experience in process optimisation, biomass pretreatment, anaerobic digestion, biomass to hydrochar and biofuels conversion technology, and circular economy.

Speaker: Nicky Eshtiaghi (RMIT University)

Abstract_195_Eshtiaghi.pdf

14:00 → 15:40 Biomaterials and Biological Systems

Convener: Dana Grecov (University of British Columbia)

14:00 KEYNOTE: Bioprinting of collagen hydrogels in supported gel environment

Speaker: Prof. Yaman Boluk (University of Alberta)

Abstract_40.pdf

14:40 EFECTS OF GELATION CONCENTRATION ON CYCLIC DEFORMATION BEHAVIOR OF POLYSACCHARIDE HYDROGELS

Speaker: Jun-ichi Horinaka

PRCR2023ABST_Horinaka.pdf

15:00 TENDON FASCICLE-INSPIRED COLLAGEN MULTIFILAMENT BUNDLE PRODUCED BY MULTI-PIN CONTACT DRAWING OF AN AQUEOUS COLLAGEN-POLYETHYLENE OXIDE SOLUTION

Speaker: Dr Hessameddin Yaghoobi (Department of Physics & Atmospheric Science, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada and School of Biomedical Engineering, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada)

2023-01-30-Abstract.pdf

15:20 EFFECT OF HOMOGENIZATION OF RAW MILK ON THE PHYSICAL PROPERTIES OF AGED CHEESE

Speaker: Prof. Isamu Kaneda (Rakuno Gakuen University)

PRCR manuscript kaneda.pdf

14:00 → 15:40 Blends, Composites and Nanocomposites

Convener: Denis Rodrigue

14:00 Formulating adhesives with aminated polyolefins for low surface energy substrate

Speaker: Ziyue Zhang (The University of British Columbia)

PRCR Ziyue Zhang 2023.pdf

14:20 CONFORMATIONAL RELAXATION OF STYRENE-BUTADIENE RUBBERS HAVING A DIFFERENT MICROSTRUCTURE BUT THE SAME COMPOSITION AT HYDROPHILIC AND HYDROPHOBIC INTERFACE

Speaker: Mr Hidenobu Taneda (Center for Polymer Interface and Molecular Adhesion Science, Kyushu Univeristy)

Abstract_PRCR2023_Hidenobu Taneda.pdf

14:40 SHAPE MEMORY AND MECHANO-RHEOLOGICAL PROPERTIES OF AMINE CONTAINING POLYETHYLENE/POLYCAPROLACTONE BLEND

Speaker: Jan Gustowski (University of British Columbia)

Jan S Gustowski abstract (PRCR 2023).pdf

15:00 Rheological Evaluation of Polyhydroxyalkanoates (PHAs) through Constitutive Equation Modelling

Speaker: Ehsan Behzadfar (Toronto Metropolitan University)

20230131_PRCR Abstract_HT_EB-updated.pdf

15:20 Development of Biodegradable and Antiviral Surgical Face Masks from Poly(lactic acid) and Poly(dimethyl siloxane)-based Polyhydroxyurethanes

Speaker: Dr Georges Younes (Polytechnique de Montréal)

GRY_Abstract.pdf

14:00 → 15:40 Suspensions and Colloids

Convener: Anthony Wachs (University of British Columbia)

14:00 KEYNOTE: The Role of Rolling Resistance in the Rheology of Wizarding Quidditch Ball Suspensions

Speaker: Sarah Hormozi (Cornell University)

Hormzoi_Abstract.pdf

14:40 Adjuvanted silica suspensions: from particles contact properties to rheology

Speaker: Xavier Chateau (ENPC, France)

PRCR_Template_2022v2.pdf

15:00 Rheology of High Performace Cement-Based Materials For Use in Additive Manufacturing

Speaker: Nicos Martys (National Institute of Standards and Technology)

PRCR_NSM.pdf

15:20 EXPLORING THE INTERPLAY BETWEEN INTERPARTICLE FORCES, RHEOLOGY, AND TRIBOLOGY IN NANOCLAY-BASED NANOLUBRICANTS

Speaker: Leonardo Martín Alarcón (University of Calgary)

NanoClay.pdf

14:00 → 15:40 Rheology in the Oil and Gas Industry

Convener: Ida Karimfazli (Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada)

14:00 WALL-SLIP EFFECTS ON FLOW RESTART IN A PLUGGED WAXY CRUDE OIL PIPELINE

Speaker: Dr Aniruddha Sanyal (National Institute of Technology Calicut)

PRCR_2023_Sanyal.pdf

14:20 FLOW RESTART MECHANISM IN A MULTIPHASE GELLED PIPELINE

Speaker: Dr Lomesh Tikariha (IIT Bombay)

Lomesh_Abstract_PRCR.docx

14:40 No talk scheduled

15:40 → 16:10 Coffee Break

16:10 → 17:50 Biomaterials and Biological Systems

Convener: Nicky Eshtiaghi (RMIT University)

16:10 Reversal motion of E-coli bacteria in nematic liquid crystals

Speaker: Dr Martyna Goral (Department of Mathematics, UBC, Vancouver, Canada and PMMH lab, ESPCI-PSL Paris, France)

PRCR2023_Vancouver_abstract.pdf

16:30 DIFFUSION OF LIPID NANOPARTICLES THROUGH AIRWAY MUCUS

Speaker: Mohammad Reza Rokhforouz (UBC Chemical and Biological Engineering)

Abstract- 8th Pacific Rim Conference on Rheology.pdf

16:50 Oscillatory microfluidic thromboelastograph (micro-TEG) analysis of whole blood coagulation and fibrinolysis

Speaker: Prof. SeHyun ‍SHIN (Korea University)

PRCR 2023_Shin.pdf

17:10 SCALE-DEPENDENT RHEOLOGY OF SYNOVIAL FLUID LUBRICATING MACROMOLECULES

Speaker: Leonardo Martín Alarcón (University of Calgary)

HA+rhPRG4.pdf

17:30 RHEOLOGY OF CORN STOVER SLURRIES UNDERGOING DILUTE-ACID PRETREATMENT

Speaker: Prof. Joseph Samaniuk (Colorado School of Mines)

Abstract_Samaniuk.pdf

16:10 → 17:50 Blends, Composites and Nanocomposites

Convener: Savvas Hatzikiriakos (The University of British Columbia)

16:10 RHEOLOGY OF BIOCOMPOSITES

Speaker: Denis Rodrigue

PRCR Rodrigue 2023.pdf

16:30 How morphological and rheological properties of PLA/MWCNT nanocomposites are affected by molecular weight, stereo configuration of PLA, and processing

Speaker: Prof. Pierre Carreau (Center for High Performance Polymer and Composite systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, Montreal, Québec, H3T 1J4, Canada)

Abstract.docx

16:50 Compatibilized polylactide/polyamide 11 (PLA/PA11) blends containing multiwall carbon nanotubes: morphology, rheology, electrical and mechanical properties

Speaker: Ms Zeinab Mousavi (Centre for High performance Polymer and Composite Systems (CREPEC), Chemical Engineering Department, Polytechnique Montreal, Montreal, Quebec H3T 1J4, Canada)

Abstract-PRCR 2023- Mousavi et al.pdf

17:10 WHY IS THE PYANE EFFECT MISSING HIGHER HARMONICS?

Speaker: Prof. Xiaorong Wang (Tongji University)

PRCR (Payne eff missing higher harmonics) (3).pdf

17:30 EFFECT OF INORGANIC FILLER ON RHEOLOGICAL PROPERTIES AND MORPHOLOGY OF POLYLACTIC ACID(PLA)/LOW-DENSITY POLYETHYLENE(LDPE) BLENDS

Speaker: Min Chan Kim (Pusan National University (Republic of Korea))

Min Chan Kim.pdf

16:10 → 17:50 Suspensions and Colloids

Convener: Gwynn Elfring (University of British Columbia)

16:10 KEYNOTE: Rheology of active colloids: motility-induced shear-thickening

Speaker: Hartmut Löwen

PRCR_abstract_Lowen.pdf

16:50 DENSITAXIS OF SWIMMING MICROORGANISMS

Speaker: Vaseem Shaik (University of British Columbia)

PacificRim_Shaik & Elfring.pdf

17:10 Hydrodynamic interactions of active matter near boundaries

Speaker: Seyed Arman Abtahi

Abtahi_PRCR.pdf

17:30 DYNAMICS OF 2D COLLOIDAL CRYSTALS IN THE PRESENCE OF LOCALIZED INTERNAL STRESSES CREATED BY ACTIVE PARTICLES

Speaker: Dr Jacob John (Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Canada)

Jacob John_Abstract_PRCR_2023.pdf

16:10 → 17:50 Rheology in the Oil and Gas Industry

Convener: Ergun Kuru (University of Alberta)

16:10 KEYNOTE: Normal stresses at the yielding point

Speaker: Prof. Paulo de Souza Mendes (PUC-Rio)

Abstract_55.pdf

16:50 Continuous Monitoring of Yield Stress and Solid Fraction of a Solid Suspension Using a Microfluidic Yield Rheometer

Speaker: Mr Durgesh Kavishvar (University of Toronto)

Abstract by Kavishvar and Ramchandran.pdf

17:10 Hercshel-Bulkley parameter evaluation of oil-based drilling fluids

Speaker: Prof. Arild Saasen (University of Stavanger)

Abstract HB parameters.docx

17:30 An algebraic thixotropic elasto-viscoplastic model for describing pre-yielding and post-yielding behaviour

Speaker: Lalit Kumar (Indian institute of Technology Bombay)

PRCR manuscript template 2022lkasb.pdf

19:00 → 22:00 Poster Session: Welcome Reception & Poster Session

Poster presentations

19:00 Active Particles Crossing Sharp Viscosity Gradients

Speaker: Jiahao Gong

Jiahao PRCR abstract manuscript.pdf

19:00 ADVANCES IN CONE-PLATE RHEOMETERS FOR BUSY LABS

Speaker: David Moonay

Dave Moonay _ Poster PRCR 2023 _ PRCR manuscript template 2022v2.pdf

19:00 Dynamical behavior of an aqueous foam in a liquid-filled Hele-Shaw cell

Speaker: Fatemeh Bararpour

PRCR manuscript-FBararpour2023.pdf

19:40 EFFECT OF THE TEMPERATURE ON THE RHEOLOGICAL BEHAVIORS OF LITHIUM-ION BATTERIES ANODE SLURRY

Speaker: 예슬 김 (Sookmyung Women's University)

PRCR 2023_Yeseul Kim.pdf

20:00 Rheological differences in anode slurries caused by shape difference between natural and synthetic graphite

Speaker: Yeeun Kim (Sookmyung Women’s University)

2023 PRCR_Yeeun Kim.pdf

20:20 TWO-STEP YIELDING BEHAVIOR OF CONCENTRATED LITHIUM-ION BATTERY ANODE SLURRY

Speaker: Jun Dong Park (Sookmyung Women's University)

PRCR 2023 Jun Dong Park.pdf

20:40 JAMMING MECHANISMS OF DILUTE FIBRE SUSPENSIONS UNDER DEAD-END AND CROSS-FLOW CONDITIONS

Speaker: Mr Miguel Esteban Villalba Chehab (The University of British Columbia)

PRCR_Abstract_2023.pdf

21:00 Diagnosing the state of the battery slurries using a machine learning technique

Speaker: Seunghoon ­Kang

PRCR2023 Poster Abstact Seunghoon Kang, Seoul National Univserity.docx

21:20 Rheology and Drag Reduction and Engineering Applications of Novel Oil-phase Suspended Polyacrylamide Slicker water Fracturing Fluids

Speaker: Mr Yongjun Lu (Petrochina Research Institute of Exploration and Development)

Abstra...ds)0104.docx

21:40 Capillary imbibition in a diverging flexible channel

Speaker: Mouad Boudina (University of British Columbia)

mouad_boudina_abstract.pdf

21:40 Deformational Vorticity in Constitutive Equations: The Co-Rigid Rotational Maxwell Model

Speaker: Cody Mischel

PRCR_2023_CMischel_DeformationalVorticityInConstitutiveEquations.v2.pdf

21:40 DEVELOPMENT OF EXTENSIONAL RHEOMETER USING PARALLEL DISK RING

Speaker: Mr Yukihiro Mineyama (National Institute of Technology, Tsuyama College, Advanced Mechanical and Control System Engineering Course)

Yukihiro_Mineyama_manuscript.pdf

21:40 DYNAMIC VISCOELASTICITY AND SPINNING BEHAVIOR OF AN ORGANOGELATOR, PMDA-R, DISSOLVED IN VARIOUS OILS

Speaker: Aya Kaide (Yamaguchi University)

KAIDE, Yamaguchi-Univ. (65726-1r).pdf

21:40 Effect of Asphaltene on the Rheological Properties of Bitumen

Speaker: Jourdain Piette (UBC)

AsphalteneAbstract.pdf

21:40 EFFECT OF CARBON NANOTUBES (CNTs) DISPERSITY IN AG/POLYDIMETHYLSILOXAN (PDMS) COMPOSITE CONDUCTORS

Speaker: EunHui Jeong

PRCR Abstract_Eun Hui Jeong.pdf

21:40 EFFECTS OF RELAXATION TIME OF POLYMER SOLUTIONS ON THE SPATIO-TEMPORAL FLUCTUATION IN A TWO-DIMENSIONAL FLOW

Speaker: Kengo Fukushima

PRCR-Abstract-Fukushima.pdf

21:40 EVALUATION OF THE LIQUID HOLDUP IN A STRATIFIED GAS-LIQUID INCLINED PIPELINE ACCORDING TO THE HERSCHEL–BULKLEY FLUID MODEL

Speaker: Prof. Jingyu Xu (Institute of Mechanics, Chinese Academy of Science)

PRCR manuscript - Xu.pdf

21:40 Gelatinization of Individual Starch Granules

Speaker: Lanxin Mo (University of British Columbia)

Lanxin Pac Rim Rheology 2023.pdf

21:40 IMPACT OF EXTENT OF DIGESTION ON THE SHEAR RHEOLOGICAL BEHAVIOUR OF ANAEROBIC DIGESTED SLUDGE

Speaker: Prof. Nicky Eshtiaghi (RMIT University, Australia)

Abstract_Impact of digestion on shear behaviour of AD sludge.pdf

21:40 INFLUENCE OF VISCOSITY HIERARCHY ON DENSITY-UNSTABLE FLUID-FLUID DISPLACEMENT IN VERTICAL CONCENTRIC ANNULI

Speaker: Maryam Ghorbani (PhD student)

Influence of viscosity hierarchy on density-unstable fluid-fluid.pdf

21:40 Measuring Transient Extensional Viscosity using Filament Stretching on an ARES G2 Rheometer

Speaker: Tianhong Chen (TA Instruments - Waters LLC)

2023 PRCR Poster Abstract-Chen final.pdf

21:40 Microrheology of Polyelectrolyte Solutions in the Semidilute Entangled Regime

Speaker: Atsushi Matsumoto (University of Fukui)

PRCR onepage_abstract_poster.pdf

21:40 OPTIMIZATION OF THE DRAG-REDUCING EFFECT BY CONTROLLING THE PREPARATION CONDITIONS OF ADDITIVES

Speaker: Takashi Saeki (Yamaguchi University)

PRCR manuscript 2022v2 Saeki-f.pdf

21:40 PREDICTICTING THE RATE OF CEMENT PLUG FAILURE

Speaker: Scott Charabin (UBC)

PRCR_Abstract.pdf

21:40 RHEOLOGICAL METHOD TO INVESTIGATE PSEUDOLAYER COMPRESSION ELASTIC CONSTANT AND THE DYNAMICS OF THE TWIST-BEND NEMATIC LIQUID CRYSTAL

Speaker: mylapalli praveen kumar (University of Hyderabad)

PRCR poster.pdf

21:40 Rheology and Self-Assembly of Carboxylated Cellulose Nanocrystals

Speaker: Ms Madeleine Hallman (Department of Chemical and Biological Engineering, University of British Columbia)

Poster Abstract - Rheology and Self-Assembly of Carboxylated Cellulose Nanocrystals.pdf

Wednesday 17 May

09:00 → 10:00 Plenary Presentations: Special Symposium Plenary Session: Hiroshi Watanabe, Kyoto University

Convener: Ralph Colby

09:00 COMPARISON OF VISCOELASTIC AND DIELECTRIC PROPERTIES OF TYPE-A CHAIN: EXPERIMENTAL ATTEMPT FOR DEEPER UNDERSTANDING OF POLYMER RHEOLOGY

Abstract:

Viscoelastic and dielectric properties of type-A chains differently average the same chain
dynamics, so that comparison of those properties resolves some details of this dynamics in a purely experimental way. Some examples of this comparison are presented in the talk.

Bio:
Hiroshi Watanabe started his academic career as Assistant Professor in 1983 in Osaka University, Japan. He moved to Institute for Chemical Research, Kyoto University, Japan, as Associate Professor in 1994, and was promoted to Professor in 2003. In 2022, he retired from Kyoto University but is still active as Emeritus Professor of Kyoto University and Visiting Professor of Changchun Institute of Applied Chemistry, Chinese Academy of Sciences. His research interest has been placed on dynamics and rheology of various softmatters that include polymers, suspensions, and emulsions. He combined several experimental methods, for example, rheological, dielectric, and small angle scattering methods, to reveal physical factors underlying the dynamic behavior of softmatters, for example, the entanglement loosening process of polymers wherein the length and time scales can be consistently coarse-grained. Professor Watanabe has received many awards for his outstanding contributions to the science of Rheology including the Bingham medal of the Society of Rheology in 2015.

Speaker: Hiroshi Watanabe

PRCR2023-Watanabe.pdf

10:00 → 10:30 Coffee Break

10:30 → 12:10 Blends, Composites and Nanocomposites

Convener: Xiaorong Wang

10:30 KEYNOTE: Role of network compressibility on the complex conductivity of structured polyelectrolyte hydrogels

Speaker: Reghan Hill (McGill University)

PRCR_Template_2022v2.pdf

11:10 ULTRASOUND EFFECT ON DISPERSION AND DISTRIBUTION OF GRAPHITIC MATERIALS INSIDE DIFFERENT PDMS

Speaker: Nicole Demarquette (École de technologie supérieure, Montréal, Québec H3C 1K3, Canada)

PACIFIC-RIM-CONF-RHEO-2023_Abstract_Manon_Favre.pdf

11:30 FLUID COMPOSITES AS ALTERNATIVES TO SOLID ELECTRICAL COMPONENTS

Speaker: Dr Lola Gonzalez-Garcia (INM-Leibniz Institute for New Materials)

PRCR manuscript LGG.pdf

11:50 THE RHEOLOGICAL PROPERTIES OF HOT MELT ADHESIVES DOPED WITH CARBON NANOTUBES

Speaker: Dr Paulina Latko-Durałek (Warsaw University of Technology)

Paulina Latko-Durałek _abstract PRCR .docx

10:30 → 12:10 Rheology in the Oil and Gas Industry

Convener: Masoud Daneshi (Department of Mathematics, University of British Columbia)

10:30 DRIFT FLUX MODELING OF GAS RELEASE IN OIL SAND TAILING PONDS

Speaker: Omid Hajieghrary (University of British Columbia)

PRCR Abstract-Omid H.pdf

10:50 RHEOLOGY OF FRESH CEMENT PASTE AS AFFECTED BY CELLULOSE NANOFIBRES AND SUPERPLASTICIZER

Speaker: Dr VIVEK BINDIGANAVILE (UNIVERSITY OF ALBERTA)

PRCR 2023 Extended Abstract_Goncalves et al.pdf

11:10 DEFYING GRAVITY: THE FLUID MECHANICS OF OFF-BOTTOM PLUG PLACEMENT

Speaker: Ida Karimfazli (Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 St. Catherine W., Montreal, QC, H3G 2W1, Canada)

PRCR_Karimfazli.pdf

11:30 RHEOLOGICAL BEHAVIOR OF MATURE FINE TAILINGS

Speaker: Mr Amir Malmir (The University of British Columbia)

RHEOLOGICAL BEHAVIOR OF MATURE FINE TAILINGS .pdf

11:50 No talk scheduled

10:30 → 12:10 Hiroshi Watanabe – Honorary Symposium

Convener: Yuichi Masubuchi (Nagoya University)

10:30 KEYNOTE: RESPONSE OF BLOCK COPOLYMER ELECTROLYTES TO IONIC CURRENT

Speaker: Nitash P. BALSARA (UC Berkeley)

Balsara PRCR Abstract 2023.pdf

11:10 GLASS TRANSITION AND ENTANGLEMENT IN SEMIFLEXIBLE CONJUGATED POLYMER MELTS

Speaker: Ralph Colby

Glass Transition and Chain Entanglement in Conjugated Polymer Melts Pacific Rim.pdf

11:30 Nano Rheology of Glassy Materials using Dielectric Molecular Probe

Speaker: Tadashi Inoue (Osaka University)

PRCR manuscript Inoue.docx

11:50 Profile of Hiroshi Watanabe

Speakers: Tadashi Inoue (Osaka University), Dr Yumi Matsumiya (ICR, Kyoto University)

12:10 → 12:50 Lunch

12:50 → 13:50 Plenary Presentations: Jaewook Nam, Seoul National University

Convener: Joung Sook Hong

12:50 Coating process for battery electrode

Abstract:
For next-generation electronics systems and devices, such as flexible displays and energy harvesting (or storage) devices, high performance, versatility, and flexibility are frequently necessary. A film, which is often a polymer or soft substrate with numerous layers of electrically conductive, semiconducting, and insulating materials superimposed on it, is a key component of these devices. These layers can be created using a variety of coating techniques. The continuous liquid coating technique, a kind of roll-to-roll process, is one of them and is widely acknowledged as an appealing way to generate affordable, high-throughput, and large-area coated layers. The coating liquid may exhibit complex rheological characteristics if it contains a variety of particles, additives (such a binder), and solvents. The main challenges in this process are how to regulate flows inside large manufacturing equipment to regulate microscopic properties, such as thickness homogeneity, particle microstructures inside coated layers, etc. Such problems require an understanding of the physical or chemical phenomena underlying them from a fundamental engineering perspective. Such knowledge might be beneficial for the process' analysis and design. For instance, while analyzing complex film formation flow in various types of applicators, such as slot die, roll, and spray, the rheological characteristics of a coating liquid must be taken into consideration. To help with the design of the drying machine, a microstructures index or indication must also be created. In this talk, various research initiatives to address these coating difficulties, including flows inside pipe systems and coating machines, will be shown. Some elements of these coating issues will also be highlighted.

Bio: Jaewook Nam is an Associate Professor in the Department of Chemical and Biological Engineering at the Institute of Chemical Processes, Seoul National University in Korea. Dr. Nam performs creative research to understand microscale flow phenomena through experiment, theory, and computation to design a high-performance film production. He received his BSc in 2000, MSc in 2004; and his PhD from the University of Minnesota in 2009. He completed his postdoctoral research in the Department of Chemical and Biomolecular Engineering at Rice University.

Speaker: Jaewook Nam (Seoul National University)

jaewooknam.docx

14:00 → 15:40 Self-assembly and Flow-induced Systems/Gels

Convener: Quan Chen (Changchun Institute of Applied Chemistry Chinese Academy of Science)

14:00 Simulation of Competition between Reaction and Relaxation in Gelation Kinetics

Speaker: Takashi Uneyama (Nagoya University)

gelation_kinetics_simulation.pdf

14:20 Quantifying the Enhancement Effect of Strain Induced Crystallization on Tearing Energy by Edge Crack Test Method

Speaker: Katsuhiko Tsunoda

PRCR manuscript K TSUNODA.pdf

14:40 REVEALING THE CORRELATION BETWEEN STRAIN-INDUCED CRYSTALLIZATION AND LOCAL STRAIN FIELD AROUND THE CRACK-TIP OF NATURAL RUBBER

Speaker: Dr Thanh-Tam MAI (​​Kyoto University, Kyoto, Japan)

PRCR2023_Thanh-Tam Mai et al. (Group of Prof. Kenji Urayama).pdf

15:00 Cluster formations of terminal groups of polyisoprenes in natural rubbers: Molecular dynamics simulation study

Speaker: Dr Taniguchi Takashi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)

PRCR_abstract_M.Dixit_T.Taniguchi-v3.docx

15:20 DIVERCITY IN STRAIN-INDUCED CRYSTALLIZATION OF NATURAL RUBBER BY BIAXIAL ELONGATION

Speaker: Shinichi Sakurai

PRCR manuscript Sakurai.pdf

14:00 → 15:40 Suspensions and Colloids

Convener: Hartmut Löwen

14:00 KEYNOTE: Shear thickening in dense suspensions of rigid rods

Speaker: George Petekidis (IESL-FORTH, Crete, Greece)

Abstract_107.pdf

14:40 Flow-induced structural change of cathode slurry during storage and its mechanism

Speaker: Mr Jeong Hoon Park (School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Korea)

Jeong Hoon Park_PRCR2023 abstract.pdf

15:00 PRACTICAL RHEOMETRY FOR SUSPENSIONS AND OTHER FUN COMPLEX SYSTEMS

Speaker: David Moonay

Dave Moonay _ Podium Presentation _ PRCR manuscript template 2022v2.pdf

15:20 YIELD AND FLOW IN AGGREGATED PARTICULATE SUSPSENSIONS IN WATER

Speaker: Dr Anthony Stickland (The University of Melbourne)

PRCR_2023_Scales.pdf

14:00 → 15:40 Non-Newtonian Fluid Mechanics and Stability

Convener: Shinji Tamano

14:00 KEYNOTE: COMPUTATIONAL ROD CLIMBING AND DIPPING DEPENDENT UPON NORMAL STRESSES

Speaker: Youngdon Kwon

Abstract_30.pdf

14:40 Alignment of wormlike micelles under shear flow: Comparison with polymers

Speaker: Yusuke Koide (Osaka University)

Koide_Goto.pdf

15:00 MOLECULAR DYNAMICS SIMULATION OF THE BEHAVIOR OF THIN LUBRICATION FILM

Speaker: Dongjie Liu

abstract.pdf

15:20 Effect of viscosity contrast in structure -rheology relationship in sheared lamellar mesophase in 3-D

Speaker: Arkaprava Pal (IISc Bangalore)

Viscon_Arka_IISc_chemEngg_Prc.pdf

14:00 → 15:40 Hiroshi Watanabe – Honorary Symposium

Convener: Dr Yumi Matsumiya (ICR, Kyoto University)

14:00 VISCOELASTIC PROPERTIES OF BIDISPERSE LINEAR POLYMERS UNDER ELONGATIONAL FLOW

Speaker: Prof. van Ruymbeke Evelyne (Bio and Soft Matter, UClouvain)

PRCR2023_E_vanRuymbeke.pdf

14:20 Dual slip-link simulation study on stretch-orientation-induced reduction of friction in bi-disperse blends

Speaker: Takashi Taniguchi (Department of Chemical Engineering, Graduate school of engineering, Kyoto University)

PRCR_abstract_Miyamoto_Sato_Taniguchi-v1.pdf

14:40 Elongation viscosity of a poly(styrene-b-2-vinylpyridine) block copolymer forming spherical microphage-separated structure

Speaker: Yuya Doi (Nagoya University)

PRCR manuscript 2022v2 (Yuya Doi_Nagoya Univ)2.pdf

15:00 Primitive chain network simulations for non-linear rheology of monodisperse polystyrene melts with friction change and violation of the fluctuation-dissipation theorem.

Speaker: Prof. Yuichi Masubuchi (Nagoya University)

PRCR manuscript template 2022YM.pdf

15:20 UNIVERSALITY OF POLYMER MELTS

Speaker: quan chen (Changchun institute of applied chemistry chinese academy of science)

Liu Chen-Yang PRCR-2023.pdf

15:40 → 16:10 Coffee Break

16:10 → 17:50 Self-assembly and Flow-induced Systems/Gels

Convener: Kenji Urayama

16:10 KEYNOTE: Relationships between viscoelastic relaxation and network connectivity in transient networks with well-controlled network structures

Speaker: Takuya Katashima (The University of Tokyo)

PRCR manuscript template 2022v2_Katashima.pdf

16:50 Phantom chain simulations for tetra and tri-branched networks

Speaker: Prof. Yuichi Masubuchi (Nagoya University)

PRCR2023_for_gel.pdf

17:10 Negative energy elasticity in polymer gel elasticity

Speaker: Takamasa Sakai (The University of Tokyo)

PRCR manuscript template 2022v2.pdf

17:30 Universal Equation of State of Osmotic Pressure for Polymer Gels

Speaker: Mr Takashi Yasuda (The University of Tokyo, Japan)

PRCR2023_Takashi Yasuda.pdf

16:10 → 17:50 Suspensions and Colloids

Convener: Chaimongkol Saengow

16:10 INFLUENCES OF SHAPE OF MOLECULAR WEIGHT DISTRIBUTION ON TENSILE PROPERTIES OF POLYETHYLENE SOLIDS

Speaker: Takumitsu Kida (Japan Advanced Institute of Science and Technology)

Abstract_129.pdf

16:30 LINKING MULTISCALE RHEOLOGY TO PERFORMANCE OF HIERARCHICALLY STRUCTURED PEM FUEL CELL CATALYST LAYER

Speaker: Min-Hyung Markus Lee (University of Calgary)

Abstract_M.Lee_2023.pdf

16:50 Inertial flow of immersed elastic capsules through a corner

Speaker: Damien Huet

PRCR_Huet_etal.pdf

17:10 Slip Behaviour and Thixotropy of Kaolinite and Mature Fines Tailings

Speaker: Jourdain Piette (UBC)

PCRC_2023_SlipKaoAndMFT.pdf

17:30 Z-SHAPED DEJAMMING PHASE DIAGRAM OF COLLOIDAL GELS

Speaker: Mr Bin Xia (Tongji University)

PRCR2023.pdf

16:10 → 17:50 Non-Newtonian Fluid Mechanics and Stability

Convener: Li Xi (McMaster University)

16:10 KEYNOTE: Psychorheology: toward understanding how we experience viscous and viscoelastic materials

Speaker: Dr Jeffrey Martin (Johnson & Johnson Consumer Inc.)

PRCR manuscript_JMartin.pdf

16:50 Modelling drop mobility on lubricated surfaces using a ternary free energy lattice Boltzmann algorithm

Speaker: Dr Sirio Orozco-Fuentes (Northumbria University)

SirioOrozco_SubmissionPacificRim.pdf

17:10 Analysis of pulsatile flows of complex fluids in two-dimensional channels

Speaker: Ms Nayeon Park (Seoul National University)

PRCR_Abstract_NP.pdf

17:30 Solving the closure problem for dilute polymer solutions

Speaker: Prof. Santosh Ansumali (Jawaharlal Nehru Centre for Advanced Scientific Research)

PRCR_Template_2022v2.pdf

16:10 → 17:50 Hiroshi Watanabe – Honorary Symposium

Convener: Tadashi Inoue (Osaka University)

16:10 RHEO-DIELECTRIC BEHAVIOR OF UNENTANGLED POLY (BUTADIENE OXIDE) UNDER STEADY SHEAR

Speaker: Dr Yumi Matsumiya (ICR, Kyoto University)

matsumiya.pdf

16:30 EXPERIMENTAL STUDY ON PHASE SEPARATION DYNAMICS OF UNENTANGLED POLYMER BLEND WITH DYNAMIC ASYMMETRY

Speaker: Dr Takeshi Sato (Institute for Chemical Research, Kyoto University, Kyoto, Japan)

PRCR2023_TS_YM_HW.pdf

16:50 Simulation study of unentangled polymers under fast flow

Speaker: Jun-ichi Takimoto

abstract.pdf

17:10 Molecular Dynamics Simulations for Viscosity Growth and Conformations of Unentangled Polymers under Shear Flow

Speaker: Takashi Uneyama (Nagoya University)

unentalged_polymer_shear.pdf

17:30 No talk scheduled.

18:00 → 19:30 Social Events: Pacific Spirit Park Hike

19:00 → 22:00 Social Events: Pub Night & Karaoke

Thursday 18 May

09:00 → 10:00 Plenary Presentations: JNNFM Walters Award Lecture - Thomasina Ball

Convener: Ian Frigaard (University of British Colubia)

09:00 JNNFM Walters Award Lecture: Viscoplastic Fingers and Fractures in a Hele-Shaw Cell

Abstract:
Radial displacement flows of viscoplastic fluid in a Hele-Shaw cell can give rise to a range of instabilities. Theoretically, the viscoplastic version of the Saffman-Taylor interfacial instability [1] is predicted to occur when the yield-stress fluid is displaced by a Newtonian one. The interface is expected to remain stable, however, if the yield-stress fluid displaces the Newtonian one [2,3].
Experiments using an aqueous suspension of Carbopol show that the Saffman-Taylor instability is observed when the Carbopol is displaced by either air or an immiscible oil, and no instabilities are observed when the displacement is the other way around. However, when water is used in the displacement experiments, other instabilities appear that take the form of localized fractures of the Carbopol over the sections of the interface that are under tension. The fractures arise in both the stable and unstable Saffman-Taylor configurations, leading to a rich range of patterns within the Hele-Shaw cell.
Supported by these experimental observations, we argue that this pattern formation results from the solid-mechanical-like failure of the Carbopol gel. In particular, the fractures result from a reduction of the effective fracture toughness of the suspension when placed in contact with water, also observed in the spreading of Carbopol gravity currents into a shallow layer of water [5].

REFERENCES
1. Saffman P.G., Taylor G.I. The penetration of a fluid into a porous medium or Hele-Shaw cell containing a more viscous liquid, Proc. Roy. Soc. A, 245, (1242) 312-329, 1958.
2. Ball T.V., Balmforth N.J., Dufresne A.P. Viscoplastic fingers and fractures in a Hele-Shaw cell, J. Non-Newton. Fluid Mech., 289, 104492, 2021.
3. Coussot P. Saffman-Taylor instability in yield-stress fluids, J. Fluid Mech., 380, 363-376, 1999.
4. Sayag R., Worster M.G. Instability of radially spreading extensional flows. Part 2: Theoretical analysis, J. Fluid Mech., 881, 739-771, 2019.
5. Ball T.V., Balmforth N.J., Dufresne A.P., Morris S.W. Fracture patterns in viscoplastic gravity currents, J. Fluid Mech., 934, A31, 2022.

About the JNNFM Walters Award Prize.

Bio:
Thomasina Ball is a Warwick Zeeman Lecturer and Leverhulme Early Career Fellow in the Mathematics Institute. Dr. Ball uses theoretical and experimental techniques to understand non-Newtonian fluid dynamics and fluid-structure interactions with applications to geophysical phenomena. She received her MMath in 2015, and PhD from the University of Cambridge, U.K., in 2019. She completed her postdoctoral studies in Department of Mathematics at the University of British Columbia under the supervision of Prof. Neil Balmforth who is jointly awarded the JNNFM Walters Award Prize.

Speaker: Thomasina Ball (University of Warwick)

PRCR_2022_ball_balmforth.pdf

10:00 → 10:30 Coffee Break

10:30 → 12:10 Self-assembly and Flow-induced Systems/Gels

Convener: Takamasa Sakai (The University of Tokyo)

10:30 KEYNOTE: Nonlinear Rheology of Concentrated Poly(vinyl alcohol)/Borax Aqueous Solution

Speaker: Quan Chen (Changchun Institute of Applied Chemistry, Chinese Academy of Science)

Abstract.pdf

11:10 Hystereses In One-dimensional Compression Of A Poroelastic Hydrogel

Speaker: Zelai Xu (University of British Columbia)

Hysteresis.pdf

11:30 NONLINEAR RHEOLOGY OF ENTANGLED WORMLIKE MICELLES: A SLIP-SPRING SIMULATION STUDY

Speaker: Dr Takeshi Sato (Institute for Chemical Research, Kyoto University)

PRCR2023_TS_RGL.pdf

11:50 COUPLING A IONIC SURFACTANT AND A DRUG SALT: EQUILIBRIUM CHARACTERISTIC PARAMETERS & STRAIN HARDENING IN START-UP FLOW

Speaker: Prof. Nino Grizzuti (Università degli Studi di Napoli Federico II)

Abstract_PRRC_Grizzuti.pdf

10:30 → 12:10 Emulsions, Foams and Bubbles

Convener: Marjan Zare (University of British Columbia)

10:30 Controlled Collision of Hele-Shaw Droplets in Extensional Flow Using a Six-Port Microfluidic Device

Speaker: Aysan Razzaghi (University of Toronto)

PRCR abstract_Aysan Razzaghi.pdf

10:50 Bubbles in Yield Stress Fluids: Link between the Rheology and Stability of Bubbles

Speaker: Masoud Daneshi (Department of Mathematics, University of British Columbia)

PRCR2023_MasoudDaneshi.pdf

11:10 PREPARATION AND PROPERTIES OF CONDUCTIVE FOAMS VIA HIGH INTERNAL PHASE EMULSION

Speaker: Prof. Seong Jae Lee (The University of Suwon)

PRCR8 Abstract (SJLee).pdf

11:30 Shear-triggered Coalescence

Speaker: Alireza Mashayekhi (University of British Columbia)

Shear-triggered Coalescence-Alireza Mashayekhi.pdf

11:50 A New Instrument for Interfacial Dilational Rheology

Speaker: Yun-Han Huang (University of British Columbia)

PRCR Huang 2023 (formatted).pdf

10:30 → 12:10 Non-Newtonian Fluid Mechanics and Stability

Convener: Miguel Moyers

10:30 Rheological effects on purely-elastic flow asymmetries in the cross-slot geometry

Speaker: Arisa Yokokoji (Okinawa Institute of Science and Technology, Okinawa, Japan)

Abstract_64.pdf

10:50 FLOW OF A WORMLIKE MICELLAR SOLUTION OVER A LONG CAVITY

Speaker: Mr Fabian Hillebrand (Okinawa Institute of Science and Technology Graduate University)

PRCR_Abstract.pdf

11:10 EFFECTS OF CHANNEL LENGTH IN EXPANSION PARTS ON FLOW REGIMES OF POLYMER SOLUTION IN CONSECUTIVE ABRUPT CONTRACTION-EXPANSION CHANNELS

Speaker: Prof. Ruri Hidema (Kobe University)

230129PRCR-Abstract-Hidema-02.pdf

11:30 Instabilities in immiscible multi-layer viscous shear flows in the presence of interfacial slip

Speaker: Anna Katsiavria (Imperial College London)

Anna Katsiavria Abstract.pdf

11:50 EFFECT OF ULTRASOUND FIELDS ON ASPHALTENE-LADEN W/O INTERFACES: A MICRORHEOLOGY APPROACH

Speaker: Razie Khalesi Moghaddam (university of calgary)

PRCR abstract-Effect of US on asphaltene laden water-oil interfaces using a microrheology approach.docx

10:30 → 12:10 Hiroshi Watanabe – Honorary Symposium

Convener: Youngdon Kwon

10:30 KEYNOTE: Rheology modification of polymeric networks via loop threading

Speaker: Dimitris Vlassopoulos (FORTH and University of Crete)

PRCR 2023 Vlassopoulos.pdf

11:10 Time-Strain Separability and Inseparability in Multiaxial Stress Relaxation of Polymer Gels with Permanent and Transient Crosslinks

Speaker: Kenji Urayama

Urayama_PRCR manuscript.pdf

11:30 INTRIGUING MELTING BEHAVIOR OF THE NATURAL RUBBER CRYSTAL FORMED BY STRAIN-INDUCED CRYSTALLIZATION

Speaker: Shinichi Sakurai

PRCR manuscript Sakurai2.pdf

11:50 Have you ever listened to the sound of the fluid?

Speaker: Prof. Kyung Hyun Ahn (Seoul National University)

Abstract_17.pdf

12:10 → 13:50 Lunch break

14:00 → 15:40 Self-assembly and Flow-induced Systems/Gels

Convener: Takuya Katashima (The University of Tokyo)

14:00 Effect of salt concentration and flow rate on clogging dynamics in the single micro-pore

Speaker: Dae Yeon Kim (Seoul National University (SNU))

PRCR abstract_DY Kim.pdf

14:20 Star-polymer-DNA gels showing predictable stress relaxation behavior

Speaker: Xiang Li (Hokkaido University)

PRCR manuscript 2022 XL.pdf

14:40 OBSERVATION OF FLOW BIREFRENGENCE IN DYNAMIC SQUEEZE FLOW

Speaker: Manabu Kato (National Institute of Technology, Tsuyama College)

PRCR manuscript.pdf

15:00 SAXS, SANS and Spectroscopy Study on High Tunability of a Block Copolymer by Strongly Selective Solvents

Speaker: Prof. Shigeru Okamoto (Nagoya Institute of Technology)

PRCRmanuscriptSOkamoto.pdf

15:20 No talk scheduled

14:00 → 15:40 Polymer Solutions and Melts

Convener: Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University)

14:00 ADVANCED POLYMER RHEOLOGY BASED ON RHEO-OPTICAL TOOLS AND A DUAL MOTOR DEVICE

Speaker: Joerg Laeuger (Anton Paar Germany)

2022-12-08 PRCR2023 AdvRheoTools.pdf

14:20 UNIVERSAL DIFFUSION OF DENDRIMERS IN SEMIDILUTE SOLUTIONS OF LINEAR POLYMERS

Speaker: Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University)

PRCR_2023_abstract_final.pdf

14:40 The Effect of the Solvent Dielectric Constant on the Conformation and Dynamics of Polyelectrolytes in Solution

Speaker: Atsushi Matsumoto (University of Fukui)

PRCR onepage_abstract.pdf

15:00 RECENT ADVANCES IN POLYMER VISCOELASTICITY FROM GENERAL RIGID BEAD-ROD THEORY

Speaker: Prof. Alan Jeffrey Giacomin (Queen's University)

PRCR manuscript_Giacomin.pdf

15:20 Improvement of Heat Resistance using Physical Aging in Polystyrene Injection Moldings

Speaker: Mr Kosaku Tao (1;Osaka Research Institute of Industrial Science and Technology. 2;Depertment of Material Science, School of Engineering, University of Shiga Prefecture.)

PRCR2023-tao.pdf

14:00 → 15:40 Emulsions, Foams and Bubbles

Convener: Arun Ramachandran (University of Toronto)

14:00 KEYNOTE: Squeezing of a concentrated emulsion with surfactant through a periodic porous medium

Speaker: Alexander Zinchenko (University of Colorado Boulder)

Zinchenko_Gissinger_Davis.pdf

14:40 The effect of surface viscosity on droplet breakup and relaxation under extensional flow

Speaker: Prof. Vivek Narsimhan (Davidson School of Chemical Engineering Purdue University)

PRCR submission droplet breakup surface viscosity.pdf

15:00 Flow and instability induced by bubbles rising in a two-layer fluid system

Speaker: Marjan Zare (University of British Columbia)

Flow and instability induced by bubbles.pdf

15:20 DYNAMICS AND MIXING OF TRAPPED DROPLETS

Speaker: Gesse Roure (University of Colorado Boulder)

PRCR_Template_2022v2.pdf

14:00 → 15:40 Non-Newtonian Fluid Mechanics and Stability

Convener: Ian Frigaard (University of British Colubia)

14:00 GAS PROPAGATION THROUGH POROUS MEDIA FILLED WITH YIELD-STRESS FLUID

Speaker: Ali Pourzahedi

Ali Pourzahedi-Abstract.pdf

14:20 Localization of stirring flows: the effect of the yield stress

Speaker: Mohammad Reza Daneshvar Garmroodi (Concordia University)

PRCR_Daneshvar.pdf

14:40 Thin-film flow of a Bingham fluid over topography with a temperature dependent rheology

Speaker: Miguel Moyers

PRCR_Asbtract_2022v2MMG.pdf

15:00 Damping of surface waves by a floating viscoplastic plate

Speaker: Xuemeng Wang (University of British Columbia)

conference abstract plato.pdf

15:20 No talk scheduled.

16:15 → 18:30 Social Events: Buses to Downtown Vancouver

16:15 First bus

Bus will depart from the Gage Towers, between the Gage and the Orca building.

17:00 Second bus

Bus will depart from the Gage Towers, between the Gage and the Orca building.

17:35 Last bus

Bus will depart from the Gage Towers, between the Gage and the Orca building.

18:30 → 22:30 Social Events: Cruise Dinner on the Magic Spirit

Friday 19 May

09:00 → 10:00 Plenary Presentations: Arun Ramchandran, University of Toronto

Convener: Reghan Hill (McGill University)

09:00 Substrate colonization by an emulsion drop prior to spreading

Abstract:

In classical wetting, the spreading of an emulsion drop on a surface is preceded by the formation of a bridge connecting the drop and the surface across the sandwiched film of the suspending medium. However, this widely accepted mechanism ignores the finite solubility of the drop phase in the medium. We present experimental evidence of a new wetting mechanism, whereby the drop dissolves in the medium, and nucleates on the surface as islands that grow with time. Island growth is predicated upon a reduction in solubility near the contact line due to attractive interactions between the drop and the surface, overcoming Ostwald ripening. Ultimately, wetting is manifested as a coalescence event between the parent drop and one of the islands, which can result in significantly large critical film heights and short hydrodynamic drainage times prior to wetting. This discovery has broad relevance in areas such as froth flotation, liquid-infused surfaces, multiphase flows and microfluidics.

Bio:
Arun Ramchandran is an Associate Professor in the Department of Chemical Engineering and Applied Chemistry at the University of Toronto. Dr. Ramchandran focuses on generating fundamental understanding in the area of suspensions of rigid and deformable particles through experiment, theory, and computation. He received his BSc in 2001and his PhD from the University of Notre Dame in 2007. He completed his postdoctoral research in the Department of Chemical Engineering at the University of California, Santa Barbara.

Speaker: Arun Ramachandran (University of Toronto)

Ramchandran - PRCR manuscript template 2022v2.docx

10:00 → 10:30 Coffee Break

10:30 → 11:50 Polymer Solutions and Melts

Convener: Ravi Jagadeeshan (Department of Chemical and Biological Engineering, Monash University)

10:30 KEYNOTE: Modular material properties in bimodal blends of amine functionalized polyolefins

Speaker: Benjamin Yavitt (University of Cincinnati)

PRCR abstract APEBimodal 230101.pdf

11:10 Linear Viscoelastic Properties of Comb-Shaped Ring Polystyrenes

Speaker: Yuya Doi (Nagoya University)

PRCR manuscript template 2022v2 (Yuya Doi_Nagoya Univ).pdf

11:30 Application of a robust self-healing experimental protocol for associating polymers

Speaker: Ms Nafiseh Moradinik (The University of British Columbia)

PRCR_2023- Nafiseh Moradinik.docx

10:30 → 11:50 Industrial Rheology in Polymer Processing

Convener: Jourdain Piette (UBC)

10:30 Rheology-Driven Continuous In-Melt Separation of PET/PE Blends and Laminates: A Novel Approach to Recycling

Speaker: Joao Maia (Case Western Reserve University)

Abstract_Maia_Recycling.pdf

10:50 Experimental Validation of Viscosity Homogenization Treatment System for Waste Plastic Recycling

Speaker: Mr Hiroki Endo (Dept. of Mechanical Engineering, Nagaoka University of Technology)

PRCR2023_HirokiENDO.pdf

11:10 DEVELOPMENT OF COMPOSITE VIA SECONDARY POLYMER-INDUCED PARTICLE AGGREGATION AND DESTRUCTION OF ITS PARTICLE AGGREGATION DURING 3D PRINTING

Speaker: JOUNG SOOK HONG

PRCR manuscript template JOUNG SOOK HONG.pdf

11:30 ANALYSIS OF OPERATING LIMITS OF VACUUM-ASSISTED SLOT DIE COATING OF HERSCHEL-BULKLEY FLUIDS

Speaker: Myungjae Lee

Abstract_PRCR_MLee.pdf

10:30 → 11:50 Non-Newtonian Fluid Mechanics and Stability

Convener: Ruri Hidema

10:30 KEYNOTE: Effect of local relaxation time on drag reduction in turbulent boundary layer flow of viscoelastic fluids

Speaker: Prof. Shinji Tamano (Nagoya Institute of Technology)

PRCR2023_final.pdf

11:10 Turbulent drag reduction with flexible and rigid polymer solutions: from low to maximum drag reduction

Speaker: Rodrigo Mitishita (University of British Columbia)

Turbulent_DR_with_flexible_and_rigid_polymer_solutions.pdf

11:30 Relating elastoinertial turbulence to the phenomenology of polymer drag reduction

Speaker: Li Xi (McMaster University)

Xi_PRCR2023.pdf

10:30 → 11:50 Rheology in the Mining Industry

Convener: Masoud Daneshi (Department of Mathematics, University of British Columbia)

10:30 RHEOLOGICAL CHARACTERIZATION OF SUSPENSIONS GENERATED FROM COPPER ORES O VARYING MINERALOGICAL FEATURES AT GRINDING CONDITIONS

Speakers: Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering), Dr Leopoldo Gutierrez (Universidad de Concepción, Department of Metallurgical Engineering)

PRCR Template - Final Version.pdf

10:50 Quantifying the effects of fines and clays on mineral tailings dewatering

Speaker: Anthony Stickland (The University of Melbourne)

PRCR 2023 Stickland et al.docx

11:10 Modelling high-pressure dewatering rolls for mineral tailings

Speaker: Nilanka Ekanayake (The University of Melbourne)

PRCR2023_EkanayakeNIK_Final.pdf

11:30 Influence of fluid type in the transition from spray to roping in hydrocyclones

Speaker: Fernando Betancourt (University of Concepción)

PRCR manuscript template 2022v2_fbetancourt.pdf

12:00 → 12:30 Closing Remarks

12:30 → 13:30 Social Events: Closing Lunch