-
Dr Nigel Rhodes15/09/2005, 09:00New Gas-based Tracking DetectorsInvited Talk
-
Astrid Muennich (RWTH Aachen)15/09/2005, 09:30New Gas-based Tracking DetectorsContributed TalkA high resolution TPC with gas amplification based on micro pattern gas detectors is a promising candidate for the main tracker at the ILC detector. The physics goals and the expected enviroment at the ILC requires the development of a TPC with unprecedented performance. Extensive R&D work has started to meet these challenges. We studied the process of ion backdrift and...Go to contribution page
-
Dr Harry van der Graaf (National Institute for Nuclear Physics and High-Energy Physics, The Netherlands)15/09/2005, 09:45New Gas-based Tracking DetectorsContributed TalkConventional readout systems for Time Projection Chambers (TPCs) based on wire chambers have certain limitations concerning counting rate and spatial resolution. We have built a new type of TPC which will not suffer from these limitations. Our mini-TPC consists of a MediPix chip, a Micromegas and an cathode plane. With the proper gas mixture and voltages it is possible to detect...Go to contribution page
-
Mr Manuel Caamano Fresco (University of Santiago Compostela)15/09/2005, 10:00Applications in Nuclear PhysicsContributed TalkWith the recent improvement in the field of exotic beam, especially with the SPIRAL facility at GANIL, a new area of the nuclear chart is now available for experimentation. Nevertheless the intensity of such beams is still relatively low (few thousands of particles per second), and for some reactions of interest the cross sections are low. Thus it is essential to be able to perform...Go to contribution page
-
Prof. Amos Breskin (The Weizmann Institue of Science)15/09/2005, 10:15Novel Gas-based Detection TechniquesContributed TalkThe thick GEM-like (THGEM) electrode is a rather new gas-avalanche electron multiplier, economically produced by standard printed circuit board (PCB) drilling and etching techniques. Its structure is similar to that of standard GEM, but its dimensions are expanded, with thickness varying from 0.4 to 3.2 mm and the mechanically- drilled hole diameter varying from 0.3 to 1mm. The Cu...Go to contribution page
Choose timezone
Your profile timezone: