Speaker
Description
In this work, three ZnS thin films were synthesized using chemical and physical deposition routes. Zinc acetate and zinc sulfate were used as precursors for the chemically deposited ZnS thin films, while ZnS powder was used as the source material for thermal evaporation. The properties of these thin films were investigated using various characterization techniques. The thicknesses of the thin films were 327.94 nm, 326.57 nm and 944.99 nm for the zinc acetate, zinc sulfate and thermally evaporated ZnS films, respectively. XRD showed predominantly amorphous nature of chemically prepared thin films, while the thermally evaporated film exhibited a strong 28.5° peak corresponding to cubic zinc blende ZnS. The optical band gaps determined from Tauc’s relation, were found to be 3.86 eV, 3.87 eV and 3.42 eV for the zinc acetate, zinc sulfate and thermally evaporated films, respectively. Photoluminescence measurements under 325 nm excitation showed the highest emission intensity for the zinc sulfate thin film, followed by the zinc acetate thin film, while the thermally evaporated thin film exhibited comparatively lower emission intensity, indicating differences in radiative recombination and defect-related states. Current-voltage measurements exhibited low-current, approximately linear and nearly symmetric responses over the investigated ±5 V voltage range, with currents in the nA regime, reflecting the semiconducting nature of the ZnS thin films. The observed structural, optical, photoluminescence and electrical variations suggest differences in defect-related states and charge-carrier behavior. These characteristics, particularly those of the amorphous thin films, highlight the potential of ZnS for further investigation in resistive-switching memory applications.