Speaker
Description
Silicon PiN diodes are widely used in radiation detection and high-energy physics applications, where exposure to ionizing radiation can alter their electrical characteristics and potentially compromise their performance. This study investigates the effects of Total Ionizing Dose (TID) on a silicon PiN diode through two-dimensional simulations using Technology Computer-Aided Design (TCAD). The device under investigation is an HPK 3.2 (Hamamatsu Photonics K.K.) PiN diode; its two-dimensional model was developed in Silvaco ATLAS, incorporating the active silicon region, highly doped contact regions, guard rings, P-stop and Junction Termination Extension (JTE) structures, as well as the surface oxide. The electrical behavior of the non-irradiated device was initially characterized using simulated current-versus-voltage (I–V) curves under forward and reverse bias conditions, establishing a baseline for the subsequent analysis of radiation effects. The analysis focuses on radiation-induced modifications to the device's current-voltage characteristics—specifically leakage current, forward conduction behavior, and reverse breakdown voltage. Furthermore, TCAD simulation enables the investigation of parameters that aid in understanding the physical mechanisms underlying these electrical changes, including trapped charge and the electric field distribution across the device. Special attention is paid to the Si/SiO2 interface region and peripheral termination structures, where the accumulation of radiation-induced harges can alter the local electric field and, consequently, influence the diode's breakdown behavior. The proposed TCAD methodology provides a numerical approach to investigating how the characteristics of silicon PiN diodes evolve with accumulated ionizing dose. By correlating macroscopic electrical characteristics with internal physical parameters derived from simulations, the study aims to improve the understanding of TID-induced degradation mechanisms and contribute to the evaluation of silicon devices intended for operation in environments exposed to ionizing radiation. X-ray irradiation will be implemented using the adiation model available in ATLAS. Radiation-induced effects in the oxide are being modeled by considering electron-hole pair generation and charge trapping mechanisms, allowing for the tracking of trapped charge evolution during irradiation. A constant dose rate of 2 rad(Si)/s was adopted, and the irradiation transient will be simulated up to accumulated TID levels of 31, 62, 93, 124, 155, 269, 383, 497, and 611 krad(Si).
ACKNOWLEDGMENT
The authors acknowledge financial support from funding agencies: Instituto Nacional de Ciência e Tecnologia - Física Nuclear
e Aplicações (INCT-FNA): Proc. 408419/2024-5; Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq):
proc. 141520/2025-6, 317886/2025-8.
| Proceedings Publication Intent | No |
|---|---|
| Student Award Eligibility | no |
| Financial Support Request | no |