22–28 Jun 2019
DoubleTree at the Entrance to Universal Orlando
America/New_York timezone

Session

7.1 Explosive Power Generators

O2E
24 Jun 2019, 16:00
DoubleTree at the Entrance to Universal Orlando

DoubleTree at the Entrance to Universal Orlando

5780 Major Blvd. Orlando, Florida, 32819, USA

Conveners

7.1 Explosive Power Generators

  • Bucur Novac (Loughborough University)

Presentation materials

There are no materials yet.

  1. Mr James Goforth (Los Alamos National Lab)
    24/06/2019, 16:00
    7.1 Explosive Power Generators
    Oral

    The Los Alamos Ranchero Flux Compression Generator (FCG) has been tested at the 76 MA level, and a 36 MA experiment was recently conducted demonstrating the functionality of an improved performance design. That test was performed with 3.5 MA initial current, which is the limit available from the capacitor bank at our high explosive pulsed power (HEPP) firing point. Computations show that the...

    Go to contribution page
  2. Anthony Johnson (Lawrence Livermore National Laboratory)
    24/06/2019, 16:30
    7.1 Explosive Power Generators
    Oral

    Lawrence Livermore National Laboratory (LLNL) is actively engaged in an experimental program using two-stage magnetic flux compression generators (MFCGs) as pulsed power sources for equation of state measurements. These MFCGs amplify a current pulse in two stages. The first stage uses a helical MFCG and the second stage uses a coaxial MFCG. In support of this program, LLNL recently...

    Go to contribution page
  3. Ashish Sharma (Indian Institute of Science)
    24/06/2019, 16:45
    7.1 Explosive Power Generators
    Either

    There is a considerable interest worldwide in the development of compact and single-shot expendable pulsed power sources for various applications. Explosively-driven helical magnetic flux compression generators (HFCGs) are natural contenders to provide the high power requirement for such applications. They consist of a hollow cylindrical metal tube called the armature filled with high energy...

    Go to contribution page
  4. Raimi Clark (Center for Pulsed Power and Power Electronics (P3E))
    24/06/2019, 17:00
    7.1 Explosive Power Generators
    Either

    The drilling behavior of polymer bonded high explosives (HE) is investigated by varying drilling parameters and analyzing resultant forces and thermal response. A modified drill press enables remote operation and precise control of cutting speed, feed, and depth. To acquire temperature at the cutting interface a K-Type thermocouple is inserted in the coolant holes of thru-coolant drill bits...

    Go to contribution page
Building timetable...