Simulating the effect of interface recombination velocity and fixed oxide charge on the responsivity of arsenic and phosphorus doped n+p PSDs

14 Sept 2011, 09:00
1h
Board: 10
Poster Presentation Poster Session

Speaker

Xerviar Omeime Esebamen (Mid Sweden University)

Description

There is an ever growing need for highly effective electron detectors with high responsivity. One of the parameters that has been shown to have a negative influence on the responsivity of a radiation detector is the surface recombination velocities of minority carriers at the Si-SiO2 interface. With the n+p detector discovered to possess better responsivity than a p+n detector at any given interface recombination velocity or fixed oxide charge Qf, there is a need to further investigate the n+p detectors. In order to identify the effects of the parameters in question, an n+p detector with doping profile (1e15 atoms/cm2) and low sheet resistance was processed. The doping profile for various n+ doping with sheet resistance of 500 Ohms/sq and the resultant electric field are shown in the figure 1 below. Before the processing of the device, Monte Carlo (MC) simulation methods were used to model the interaction between the electrons and the detector after the processing steps described above. This was employed to track the passage of bombarding electron particles through the detector taking into account possible interactions and decay processes. The simulations made use of "Standard" electromagnetic processes which Geant4 provides. With the aid of the program, we were able to investigate the energy deposit of electrons at different radiation energy per slice of 1 mm thick of the detectors at a given depth as well as compute a Linear Energy Transfer data (LET) that was then used in Taurus Medici to further analyze the detectors. To analyze the silicon bulk and the Si-SiO2 interface, we used some simple mobility models such as parallel field mobility model to account for carrier heating and velocity saturation effects. This was done by using analytic expressions for the drift velocity vd as a function of the electric field in the direction of current flow, E||, and defining μ(E||) = vd(E||)/E||. Other models used included Auger recombination model, Shockley-Read-Hall recombination model with fixed lifetimes as well as a concentration-dependent mobility model which involves the use of mobility tables to model the dependence of carrier mobility on impurity concentration.

Preferred medium (Oral/poster)

Poster

Author

Xerviar Omeime Esebamen (Mid Sweden University)

Co-author

Göran Thungström (Mid Sweden University)

Presentation materials

There are no materials yet.