Conveners
Standard talks: T1
- Andrew Johnson (Argonne National Laboratory)
Standard talks: T2
- Ran Hong (Argonne National Laboratory)
Standard talks: T3
- Thomas Fors (Argonne National Lab)
Standard talks: T4
- Suyin Wang (Argonne National Lab)
-
Mark Rivers20/09/2025, 09:10StatusStandard talk
Most APS beamlines are using VME crates as a major part of their control system.
The VME hardware is expensive and becoming obsolete, with replacements for many of the above items no longer available. The VxWorks software is also expensive.Prior to the shutdown for APS-U April 2023 the 4 GSECARS beamlines at sector 13 were using an EPICS system based primarily on 7 VME crates running...
Go to contribution page -
Timo Korhonen (European Spallation Source ERIC)20/09/2025, 09:30Clients & FrameworksStandard talk
This talk will present some exploration of ideas about how the oac-tree sequencer by ITER could be integrated in the surrounding EPICS infrastructure. Topics like implementing reactive sequences, modularizing the trees and utilizing templating to configure reusable modules will be covered.
Go to contribution page -
Edmund Blomley (Karlsruhe Institute of Technology)20/09/2025, 09:50Clients & FrameworksStandard talk
The Karlsruhe Research Accelerator (KARA) at KIT uses a customized software layer to “activate” EPICS alarms based on the operating state of the accelerator. Since KARA does not run 24/7 and also operates in very different modes, the basic idea is to be able to temporarily disable or enable some EPICS alarms based on certain conditions. To date, we have used our own Java software layer for...
Go to contribution page -
Sky Brewer (ESS)20/09/2025, 10:10Clients & FrameworksStandard talk
Overview of a bug found in pvaccess that created zombie threads and was affected by both Phoebus and the Archiver Appliance in different setups.
Go to contribution page -
Kaz Gofron (Brookhaven National Laboratory)20/09/2025, 11:30ApplicationsStandard talk
Abstract
Go to contribution page
In this presentation, we will describe the design, implementation, and integration of a modular EPICS-based control architecture for the Timepix3 detector ecosystem deployed at ORNL neutron and X-ray facilities. Our control framework leverages multiple interlinked components:
1. ADTimePix3 Detector Driver: Built upon the EPICS areaDetector framework, the ADTimePix3 driver offers... -
Bob Dalesio20/09/2025, 11:50EPICS CoreExtended talk
EPICS was developed as a toolkit for implementing scientific control solutions. It is designed and implemented to provide a robust and high performance set of tools that can be used to limit the need for software development. This presentation will revisit these fundamentals as they relate to the current state of EPICS.
Go to contribution page -
Luka Perusko (Cosylab)20/09/2025, 14:30IOC SupportStandard talk
The distributed architecture of MRF timing systems provides a fitting platform for implementing interlock functions with low latency. In the Fast Beam Interlock (FBI) system developed for Nusano, input statuses from Event Receivers (EVRs) are transmitted to the Event Master (EVM), combined into logical flags and propagated to EVR outputs.
Go to contribution page
This enables fast and configurable propagation of... -
Klemen Vodopivec (ORNL/SNS)20/09/2025, 14:50Clients & FrameworksStandard talk
At SNS we have developed a new nameserver that builds the PV cache dynamically by searching for PVs on the network and storing them until IOCs are alive, without the need to pre-load or keeps a database of PVs. This project was started to support the specifics of the highly diverse EPICS environment with many flavors of Channel Access clients/servers. The PVmapper was implemented to allow...
Go to contribution page -
Marnelli Martinez (Spallation Neutron Source)20/09/2025, 15:10ApplicationsStandard talk
A dynamic simulation model of the Central Helium Liquefier (CHL) at the Spallation Neutron Source (SNS) has been developed using the EcosimPro commercial software. This model facilitates production system replication providing virtual environments for software testing, operator training, process analysis and troubleshooting. In this integration project, the EcosimPro model will be deployed as...
Go to contribution page -
Karen White (Oak Ridge National Laboratory)20/09/2025, 16:30StatusStandard talk
Report on recent. EPICS Council activities.
Go to contribution page