Name: 27th IEEE Symposium on Fusion Engineering
Start: 2017-06-04T08:00:00+08:00
End: 2017-06-08T18:00:00+08:00
Location: Marriott Shanghai City Center

27th IEEE Symposium on Fusion Engineering

from Sunday 4 June 2017 (08:00) to Thursday 8 June 2017 (18:00)

Monday 29 May 2017
Tuesday 30 May 2017
Wednesday 31 May 2017
Thursday 1 June 2017
Friday 2 June 2017
Saturday 3 June 2017
Sunday 4 June 2017

08:30

08:30 - 17:30
Room: Meeting Room 1

08:30 - 17:30
Room: Meeting Room 2

18:00 Welcome Reception
Welcome Reception
18:00 - 20:30
Room: Grand Ballroom

Monday 5 June 2017
08:00
08:00 - 10:10
Room: Grand Ballroom
Contributions

08:00 Opening Remarks - George Neilson (Princeton Plasma Physics Laboratory)

08:10 Opening Remarks - Jiangang Li (Institute of Plasma Physics, Chinese Academy of Sciences)

08:20 Welcome Message - Delong Luo (Director, ITER-China)

08:35 Conference Logistics - George Neilson (Princeton Plasma Physics Laboratory)

08:40 Technical Program Overview - Paul Humrickhouse (Idaho National Laboratory)

08:50 Overall Status of the ITER Project - Bernard Bigot (ITER Organization)

09:30 CFETR- New Design and R&D Activities - Yuanxi WAN (USTC/ASIPP)
10:10 Break
Break
10:10 - 10:40
10:40
10:40 - 12:40
Room: Salon 1
Contributions

10:40 OVERVIEW OF NSTX-U PROGRESS - Rajesh Maingi (PPPL)

11:00 Technical issues toward the steady state operation at KSTAR - Jong-Gu Kwak (NFRI)

11:20 Status of the ITER Vacuum Vessel Manufacturing - C.H. Choi (ITER Organization)

11:40 MAST Upgrade Divertor Facility: A test bed for novel divertor solutions - William Morris (CCFE, UKAEA)

12:00 Progress of Interface Design between Test Cell and Lithium Systems in IFMIF-DONES - Kuo Tian (Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology)

12:20 Development and Application of High Intensity D-T Fusion Neutron Generator HINEG - Chao Liu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)
10:40 - 12:40
Room: Salon 2
Contributions

10:40 Design and test of W7-X water-cooled Divertor Scraper - Jean Boscary (Max Planck Institute for Plasma Physics)

11:00 Modeling and Experimental Validation of Physics Enabled by W7-X Scraper Element Divertor Components - Jeremy Lore (Oak Ridge National Laboratory)

11:20 Status of the ITER Cooling Water System Design - Giovanni Dell'Orco (ITER IO)

11:40 Virtual Engineering of a fusion reactor: application to divertor design, manufacture and testing - Thomas R. Barrett (CCFE, Culham Science Centre, Abingdon OX14 3DB, United Kingdom)

12:00 Expermental and numerical investigation on anti-fatigue and anti-thermal shock performance of the divertor first wall - shenghong Huang (university of science and technology of china)
10:40 - 12:40
Room: Salon 3
Contributions

10:40 Status of the ICF program in China - Wanguo Zheng (Research Center of Laser Fusion, CAEP. )

11:00 Magnetized Target Fusion at General Fusion - Michel Laberge (General Fusion)

11:20 Properties of a Clean and Economic Boron Laser Fusion Reactor - Heinrich Hora (University of NSW Sydney)

11:40 Fusion chamber dynamics and first wall response in a Z-pinch driven fusion-fission hybrid power reactor (Z-FFR) - Jianmin Qi (Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics)

12:00 Experimental results from the SPECTOR device at General Fusion - Michel Laberge (General Fusion)

12:20 Radiation Safety Design for the North Pole Neutron Time-of-Flight System at the NIF - Hesham Khater (Lawrence Livermore National Laboratory)
12:40 Lunch
Lunch
12:40 - 13:40
Room: Shanghai City Bistro/EZO Restaurant
13:40
13:40 - 15:40
Room: Junior Ballroom
Contributions

13:40 Control and protection system for the W7-X ECRH plant – experience from the first and plans for the next campaign - Stefan Marsen (Max-Planck-Institut für Plasmaphysik)

13:40 Research on Brazing technique of tungsten materials and reduced active ferritic–martensitic steels - Jianbao WANG

13:40 Design and Analysis of the High Power DC Water-Cooled Busbar Connecting Type - Zhongma Wang (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Design of Ground Plane of NSTX-U Ohmic Heating Coil - Weiguo Que (Princeton Plasma Physics Laboratory)

13:40 Servo-Power-Controller Design Based on EPICS - Yinchi Duan (Institute of Plasma physics, Chinese Academy of Sciences)

13:40 The Design on Pulse Distributor and Its On-line Status Diagnosis for ITER PF Power Supply - Xiaojiao Chen (a. Institute of Plasma Physics, Chinese Academy of Science(ASIPP) b. University of Science and Technology of China)

13:40 Reverse Processing of CFETR Vacuum Vessel Mock-up - Haibiao Ji (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Current Status and Progress on the Shield Blanket Design of CFETR Reactor - Liu Changle (Institute of Plasma Physics, CAS)

13:40 Lithium Evaporation System Design for the NSTX-Upgrade Fusion Device - Dang Cai (Princeton Plasma Physics Lab)

13:40 NEUTRONIC SHIELDING DESIGN OF THE ITER EC UPPER LAUNCHER - Peter Spaeh (KIT)

13:40 Concept Design of GDT-Based Fusion Neutron Source for Improving the Q with High Field Neutral Beam Injection - Dehong Chen (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

13:40 Divertor heat flux study of H-mode with NBI in EAST - Bo Shi (Institute of Applied Physics of AOA)

13:40 Time Synchronization Network for Poloidal Field Power Supply Control System Based on IEEE 1588 - Shiying HE (Institute of Plasma Physics, CAS)

13:40 Integral Benchmark Experiments on a Large Copper Block using GELINA accelerator to validate natural Cu neutron inelastic scattering cross sections from different neutron cross section databases. - Mario Pillon (ENEA)

13:40 SAFETY ANALYSIS OF HELIUM COOLED CERAMIC BREEDER TEST BLANKET SYSTEM - Jiangtao Jia (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

13:40 ITER PF6 Dummy Double Pancake Winding - Wei Wen (ASIPP)

13:40 Analysis of Short Circuit Fault for 4.6GHz/6MW LHCD High Voltage Power Supply - Yang Zhigang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Design of Inverter Module on RMP coil Power Supply in EAST - Deyong Song (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Designing a Power Module for Compressed Plasma - Zhiyuan Weng (Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP))

13:40 Thermal and mechanical analysis of the Wendelstein7-X cryo-vacuum pump plug-in - Zhongwei Wang

13:40 Implementation of an Excitation Controller for an Impulse Motor-Generator - Chi Wang (Southwestern Institute of Physics)

13:40 Electronic Transport Properties of NbTi in Cooper Matrix Superconducting Wires for ITER Applications - Alina Elena Niculescu (ICSI Rm. Valcea, Romania)

13:40 Conceptual Design of a Bidirectional Hybrid DC Circuit Breaker for Quench Protection of CFETR - Shusheng Wang

13:40 Design a Suitable Test Scheme for Triggering Bypass Protection Test of ITER PF Converter Unit - Xiuqing Zhang (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Transient stability analysis of a flexible generator used in fusion power plant - Hua Li (Institute of Plasma physics, Chinese Academy of Sciences)

13:40 Physics and engineering progress of CFETR integration design - Xiang Gao (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 The Development of a monitoring system for poloidal Field Power Supply - Lili Zhu

13:40 Operation Analysis of Impulse Current Mode on ITER High Power DC Test Platform with SVC System - Xudong Wang (Institute of Plasma Physics, Chinese Academy of Science)

13:40 RAMI analysis for PFCs of EAST divertor - Yang Zhang

13:40 Rectangular Magnetic Sensor Array for Current Measurement Based on Numerical Quadrature Method - Qi Guo

13:40 Conceptual design of the torus cryopump for CFETR - Chen Chen

13:40 A rapid non-destructive inspection method applied to EAST lower divertor by IR thermography technique - Yanwei Liu (Institute of plasma physics, Chinese Academy of Sciences)

13:40 The reliability design of CFETR divertor - Lei Cao (Institute of plasma physics, Chinese Academy of Science)

13:40 Conceptual design of the cryogenic system for CFETR - Xiaogang Liu (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 NSTX-U IN-VESSEL CONTROL COILS DESIGN CONCEPT - Neway Atnafu (Princeton University)

13:40 New features of the W7-X Safety Control system for OP 1.2 - Reinhard Vilbrandt (Max-Planck-Institute for Plasma Physics, D-17491 Greifswald, Germany)

13:40 The feasibility of application the existing IVVS concept to CFETR - ZIBO ZHOU (CASIPP)

13:40 Upgraded Design of EAST Lower Divertor - Pengfei Zi ( Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Research and Analysis on the Compatible Structures of the CFETR Divertor Based on the Remote Handling Requirements - Huaichu Dai (1.Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China; 2. University of Science and Technology of China, Hefei 230026, China)

13:40 The Design of Real-time Communication System Based on RFM and MRG-Realtime for EAST - Li Chunchun (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Modeling of Ohmic Disruptive Discharge in J-TEXT Using the Tokamak Simulation Code - Jinhong Yang (New Star Research Institute of Applied Technology)

13:40 Experimental Study on Natural Circulation Heat Transfer of Square Channel in Water Cooled Blanket - hui bao (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Test upgrade for ITER HTS current leads series production - Chenglian Liu (Institute of Plasma Physics, CAS)

13:40 Neutronics and thermomechanical analysis of a conceptual shielding blanket for CFETR - Jie Zhang

13:40 Li2Be2O3 pebbles prepared via sol-gel method: multifunctional blanket material designed to both tritium breeder and neutron multiplier - Wei Lu (Institute of Applied Physics, Army Officer Academy)

13:40 Performance test of CICC joint for ITER correction coil - Yuanyuan Ma

13:40 Simulation study of large power handling in the divertor for CFETR phase II - Xiaoju Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Progress in the development of CFC/CuCrZr components for HL-2M divertor - Youyun Lian (Southwestern Institute of Physics)

13:40 The forming die design and experimental research of CFETR Vacuum Vessel shells - Yuncong Huang (Southwestern Institute of Physics)

13:40 Application of EPICS in HL-2A Host Centralized Control System - Jie Xu

13:40 Recent Development in Structural Design and Optimization of ITER Neutral Beam Manifold - Chengzhi Cao (Southwestern Institute of Physics)

13:40 Preliminary Probabilistic Safety Assessment of Tokamak-type Fusion Power Plants In Conceptual Design Stage - Shanqi Chen (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

13:40 Tokamak Size Scaling - GE LI (Inst. of Plasma Physics, CAS)

13:40 Latest results from the Hybrid Illinois Device for Research and Applications (HIDRA) - Rabel Rizkallah (University of Illinois)

13:40 WCLL BLANKET MODULE STRUCTURE VARIATION INFLUENCE ON NEUTRON ACTIVATION INVENTORIES - Andrius Tidikas (Lithuanian Energy Institute)

13:40 An approach to the study of crack initiation at the divertor tungsten target plates of ASDEX Upgrade - Nikola Jaksic (Max Planck Institute for Plasma Physics, EURATOM Association)

13:40 Current profile measured by the motional Stark effect polarimeter in the HL-2A tokamak - Wenjin Chen

13:40 Lessons learned on design, manufacturing and commissioning of IRVIS endoscopes prototypes for W7-X divertor temperature monitoring - Didier Chauvin (CEA)

13:40 Transverse velocity effect on Hunt’s flow - Hao Wang (School of Mechanical Engineering, Hangzhou Dianzi University，Hang Zhou, China)

13:40 Final Design and Fabrication of the TDU Scrapper for Wendelstein 7-X - G. Douglas Loesser (Princeton Plasma Physics Laboratory)

13:40 Numerical Simulation Research on the New Design Scheme of the EAST Divertor using Multi-physics Coupling Method - Lei LI (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Progress of Auxiliary Systems for Linear IFMIF Prototype Accelerator (IFMIF) - Giuseppe Pruneri (IFMIF/EVEDA Project Team (RFX))

13:40 Modeling of advanced nuclear fuel cycles incorporating hybrid fission/fusion devices. - Martin Nieto-Perez (CICATA Queretaro - IPN)

13:40 Safety impact of the Be-steam reaction during in-box LOCA on the WCCB blanket for CFETR - Xiaoman Cheng (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 PPPL's Project Management Office: Work Planning System - Soha Aslam (PPPL)

13:40 The measurement of visible bremsstrahlung emissivity profiles on HL-2A - Liu Liang (Southwestern Institute of Physics)

13:40 ENGINEERING METHODOLOGY TO PROVIDE INTEGRITY OF THE ITER PORT PLUG ON-BOARD COMPONENTS DYNAMICALLY RESPONDING TO PLASMA TRANSIENTS COMBINED WITH SEISMIC EVENTS - Anatoly Panin (Forschungszentrum Juelich GmbH)

13:40 Design of a local oscillator for the 2.45GHz/4MW LHCD system on EAST - ZHU Liang (ASIPP)

13:40 A Method for Diagnosis of Current in PF Magnet based on Inversion of Measured Magnetic Field - Zichu Huang

13:40 Improvement of the plasma current density profile by the polarimeter/interferometer system on the EAST tokamak - Xiang Zhu

13:40 Design and Analysis of the CFETR TF Coils with REBCO tapes - Yong Ren

13:40 COMPUTATIONAL MODELING AND CHARACTERIZATION OF PLASMA PULSED GUN FOR PLASMA WALL INTERACTION APPLICATIONS - Christian Gómez-Samaniego (CICATA Queretaro-IPN)

13:40 The Design of DRAGON-V Loop for Key Technique Verification of Liquid PBLI Blanket - zhiqiang zhu

13:40 Numerical–experimental benchmarking of a probabilistic code for prediction of Voltage Holding in High Vacuum, for ITER N-NBI. - Nicola Pilan (Consorzio RFX)

13:40 Mechanical Designs for High Magnetic Field Tests for ITER Applications - Luis Delgado-Aparicio (Princeton Plasma Physics Laboratory)

13:40 Advances in Technology, Performance, and Power and Polarization Measurements for the ECH System on DIII-D - Mirela Cengher (General Atomics)

13:40 Numerical simulation of particle dynamics in the magnetic mirror - Hui Wang (Army Officer Academy)

13:40 Thermal Strain Measurement of EAST Tungsten Divertor Module with Bare FBG Sensors - Xingli Wang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Application of Contour Fitting Method in CFETR VV Assembly - Xiaosong Fan

13:40 EM Analysis of ITER Diagnostics Upper Port Plugs 14 (US port) and its in-Port components during Plasma Disruptions - russell feder (pppl)

13:40 Development of primary vacuum windows for ITER diagnostics - Victor Udintsev (ITER Organization)

13:40 Real-time Two-dimensional Optical Polarization Properties of the Fusion Reactor First Mirror Based on Active Polarized Beams - Junli Qi (University of Science and Technology of China)

13:40 Study on considerable defects introduced in tritium breeding material Li2TiO3 by annealing in vacuum - Qiang Qi (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 The numerical simulation for the heat transfer enhancement experiments of the HCCB-TBM first wall - Desheng Cheng

13:40 Optimized Shape of TF Coil - Wang Zhaoliang

13:40 The in-vessel protection components for ITER First Plasma operation - Ryan Hunt (ITER Organization)

13:40 Mechanism for Plasma Fusion with Major Ionic Species at Only Ten Million Kelvins - Tianxi Zhang (Alabama A & M University)

13:40 Insulation Systems for the ITER Central Solenoid Modules - Nikolai Norausky (General Atomics)

13:40 Test Results of ITER 52-kA HTS Current Lead Prototypes - Chenglian Liu (Institute of Plasma Physics, CAS)

13:40 Assembly methodology and tools developed for Tore Supra transformation into WEST platform - Cyril BRUN (CEA)

13:40 The enhancement of high temperature deformation resistance for V-4Cr-4Ti alloys - Pengfei Zheng (Southwestern Institute of Physics)

13:40 The effect of He nanobubble on inhibiting D trapping in radiation damaged tungsten - Quan Bai (SWIP)

13:40 Sensitivity Studies of Tritium Transport to WCSB of CFETR - Yang Xiang (University of Science and Technology of China)

13:40 Study on the effect of Pressure on the Electrical insulation of Plasma-sprayed Alumina Coating - Rongrong Luo (Southwestern Institute of Physics)

13:40 Particle model of the driver of ITER NBI system - Nicola Ippolito (INFN - Italy)

13:40 Polarizer designed for the electron cyclotron resonance heating system on J-TEXT - C.H. Liu (First author)

13:40 Tritium transport analysis for one water-cooled ceramic breeder blanket module of CFETR based on COMSOL - Dingyu Lao (Institute of Plasma Physics Chinese Academy of Sciences (ASIPP))

13:40 Automatic Deployment of a Nuclear Fusion Experimental Data Storage Cluster - Wei Zheng

13:40 Preliminary Design for Diagnostic Port Integration at ITER Upper Port #18 - Sunil PAK (National Fusion Research Institute)

13:40 Spectroscopic diagnostics for negative ion source test facility at ASIPP - lizhen liang (ASIPP)

13:40 Effect of Rapid-forging and annealing on the properties of W-TaC alloys - Fan Feng

13:40 Preliminary Assessment of Tungsten as an Optional Plasma Facing Material in CFETR - Guoliang Xu (School of Nuclear Science and Technology, University of Science and Technology of China)

13:40 A construction design of helium recovery and purification system on HL-2M - Xin Chen

13:40 Thermal Analysis and Test for the Mockup of ITER Radial X-Ray Camera - jian ge (asipp)

13:40 Multiple laser system for high resolution Thomson scattering diagnostics on the EAST tokamak - Xiaofeng Han

13:40 Improving accuracy of interceptive current measurement for use in IFMIF/EVEDA accelerator - Yosuke HIRATA (National Institute for Quantum and Radiological Science Technology, IFMIF Accelerator Group)

13:40 The dynamic testing and analysis of copper and copper alloy in divertor working temperature range - X. Mao

13:40 Suppression of tungsten impurity by lithium injection in tungsten divertor on EAST - Wei Xu (Institute of Plasma Physics)

13:40 A Quasi-Periodic Linear Feeder for the Impurity Granular Injection on DIII-D - Alexander Nagy (PPPL)

13:40 Study on the Welding Process of the Vacuum Vessel Mock-up for CFETR - ZHIHONG LIU
15:40 Break
Break
15:40 - 16:00
16:00
16:00 - 18:00
Room: Salon 1
Contributions

16:00 Plasma control for EAST long pulse non-inductive H-mode operation in a quasi-snowflake shape - Bingjia Xiao (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, China)

16:20 Real-time control of MHD instabilities using ECCD - Matthias Reich (IPP Garching)

16:40 Real-time detection and localization of magnetic island used for neoclassical tearing mode control and disruption mitigation - Yang Zhang

17:00 A first analysis of JET plasma profile based indicators for disruption prediction and avoidance. - Alessandro Pau (Electrical and Electronic Engineering Dept- University of Cagliari, Cagliari, Italy)

17:20 New control ability on EAST PCS for steady-state operation - Qiping Yuan (Institute of Plasma Physics, Chinese Academy of Sciences)

17:40 ELM pacing with lithium granules injection in W divertor on EAST - Zhen Sun (Institute of Plasma Physics, Chinese Academy of Sciences)
16:00 - 18:00
Room: Salon 2
Contributions

16:00 Application of Materials Science Advances to Fusion Energy - Steven J. Zinkle (University of Tennessee)

16:20 Thermomechanical properties of nanostructured W based coatings under ITER-relevant thermal loads - Edoardo Besozzi (Politecnico di Milano)

16:40 EFFECTS OF TEMPERATURE AND HE CONCENTRATION ON FORMATION AND GROWTH OF HE BUBBLE IN BCC IRON UNDER IRRADIATION - Jie Zhan (University of Science and Technology of China)

17:00 Effects of high-energy C ions irradiation on the D retention behavior in V-5Cr-5Ti - Yu-Ping Xu (Institute of Plasma Physics, Chinese Academy of Sciences)

17:20 The experimental investigation of wetting property for liquid lead lithium alloy with breeder blanket materials - Weihua Wang (Institute of Applied Physics, Army Officer Academy)

17:40 Design, synthesis and characterization of Li4SiO4-based solid solutions as advanced tritium breeders - Linjie Zhao (China Academy of Engineering Physics)
16:00 - 18:00
Room: Salon 3
Contributions

16:00 Status of K-DEMO Design Concept Study - Keeman Kim (National Fusion Research Institure, Republic of Korea)

16:20 Building a Virtual Tokamak - Integrated Multi-Physics Modelling for Fusion Engineering - Matti Coleman (UKAEA)

16:40 Conceptual development of K-DEMO, highlighting maintenance and support details of in-vessel components - Thomas Brown (Princeton Plasma Physics Laboratory)

17:00 Preliminary Research on Reliability Index System of Fusion Power Plant - Dagui Wang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

17:20 Initial concept for the plasma diagnostic and control system for the European DEMO tokamak reactor - W. Biel (Institut für Energie- und Klimaforschung, Forschungszentrum Jülich GmbH, Germany)

17:40 Status of the US Virtual Laboratory for Technology - Phil Ferguson (Oak Ridge National Laboratory)
19:00 Women in Engineering Reception
Women in Engineering Reception
19:00 - 21:00
Room: Meeting Room 5
Tuesday 6 June 2017
08:00
08:00 - 10:10
Room: Grand Ballroom
Contributions

08:00 Announcements

08:10 Plasma Instrumentation for Spaceflight Missions - Scott Weidner (Princeton University)

08:50 Status and Progress of JT-60SA - Y Kamada (National Institutes for Quantum and Radiological Science and Technology)

09:30 Progress in the EU DEMO Research and Design Activity - Gianfranco Federici (EUROfusion)
10:10 Break
Break
10:10 - 10:40
10:40
10:40 - 12:40
Room: Salon 1
Contributions

10:40 Design, Manufacturing, and Integrated Testing of the ITER Port Instrumentation - Stefan Simrock

11:00 Design and Analysis Progress of US ITER Integrated Diagnostic Upper Port 14 - Yuhu Zhai (PPPL)

11:20 Novel multi-energy x-ray cameras for magnetically confined fusion plasmas - Luis F. Delgado-Aparicio (Princeton Plasma Physics Laboratory)

11:40 Surface deterioration and recovery of CXRS first mirror in EAST - Yan Rong

12:00 Integration Conceptual Study of Reflectometry Diagnostic for the Main Plasma in DEMO - R Luis (Instituto dos Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

12:20 Prototype manufacturing and testing of metalized ceramic printed circuit boards for ITER Bolometer cameras - Florian Penzel (Max Planck Institute for Plasma Physics)
10:40 - 12:40
Room: Salon 2
Contributions

10:40 TUNGSTEN TECHNOLOGY DEVELOPMENT IN KOREA AND ITS APPLICATION TO KSTAR EXPERIMENTS - Suk-Ho Hong (National Fusion Research Institute)

11:00 Investigation of ITER-grade tungsten under very high heat loads. - Leonid Khimchenko (ITER RFDA)

11:20 Tungsten monoblock concepts for the U.S. Fusion Nuclear Science Facility (FNSF) first wall and divertor - Yue Huang (UCLA)

11:40 Thermal Stress Evaluation on the Optimized Shaping Design for Tungsten Monoblock in EAST Divertor - Xiahua Chen (Institute of Plasma Physics Chinese Academy of Sciences, University of Science and Technology of China)

12:00 Precipitation of transmutant elements in neutron irradiated tungsten - Xunxiang Hu (Oak Ridge National Laboratory)

12:20 Defect production and deuterium bulk retention in quasi-homogeneously damaged tungsten - Feng Liu (Institute of Plasma Physics, Chinese Academy of Sciences)
10:40 - 12:40
Room: Salon 3
Contributions

10:40 DESIGN OF CHINESE DEMO BLANKET CONCEPTS AND R&D PROGRESS OF DFLL TBM - Qunying Huang (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

11:00 WCLL breeding blanket design and integration: lessons learned in 2016 and follow-up - Alessandro Del Nevo (ENEA FSN-ING-PAN)

11:20 CONSOLIDATED DESIGN OF THE LOW TEMPERATURE EU-DCLL - David Rapisarda (CIEMAT)

11:40 Integration of the Neutral Beam Injector System into the DCLL breeding blanket for the EU DEMO - Iván Fernández-Berceruelo (CIEMAT)

12:00 Development, characterization and testing of a SiC-based material for Flow Channel Inserts in high temperature DCLL blankets - Carlota Soto (CEIT )

12:20 THE APPLICATION OF NANO FLUID TECHNOLOGY ON MHD EFFECT OF LIQUID METAL TRITIUM BREEDER BLANKETS - zi meng (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)
12:40 Lunch
Lunch
12:40 - 13:40
Room: Shanghai City Bistro/EZO Restaurant
13:40
13:40 - 15:40
Room: Junior Ballroom
Contributions

13:40 Repair of the cracked surface of W using high energy pulsed laser - Dahuan Zhu (Institure of Plasma Pyhsics, Chinese Academic of Sciences)

13:40 Diversification of the position sensing instrumentation for the JET neutral beam calorimeters - Peter Blatchford (Culham Centre for Fusion Energy)

13:40 Inertia load analysis of ITER equatorial and upper port plug EPP9 and UPP14 - Han Zhang (Princeton Plasma Physics Lab)

13:40 Application of the voltage control mode of second-generation EAST active feedback power supply - haihong huang (hefei university of technology)

13:40 ESTIMATION OF STRAY CAPACITANCES OF TWIN SOURCE HVDC TRANSMISSION LINE AND ITS STORED ENERGY - Vishnudev M N (ITER India, Institute for Plasma Research)

13:40 RIPER: An irradiation facility to test Radiation Induced Permeation and Release of deuterium for fusion reactor materials. - Alejandro Morono (CIEMAT)

13:40 Comparison of radiative divertor behavior in Ar and Ne seeded plasmas in EAST - Jingbo Chen (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 R&D of linear plasma facilities for PMI research at ASIPP - H.-S. Zhou (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Application of PAUT in CFETR vacuum vessel austenitic stainless steel welding R&D - wang rui (University of Science and Technology of China)

13:40 Transport analysis of EAST long-pulse H-mode discharge with Integrated Modeling - Muquan Mu

13:40 IPSE DIXIT: A User-Friendly Software Tool for the Design and Operation of Tokamak Power Supplies - Alessandro Lampasi (ENEA)

13:40 Design and Analysis Progress of US ITER Integrated Diagnostic Equatorial Port 09 - Yuhu Zhai (Princeton Plasma Physics Laboratory)

13:40 The Protection Strategy Design and Implementation for ITER PF Converter System - Liansheng HUANG

13:40 A digital signal processing system of digital Rogowski current transducer with comb filter - Zhen Zhang (Institute of Plasma Physics Chinese, Academy of Sciences)

13:40 Development of Rotational Speed Control Equipment And Brake Equipment for 300MVA Pulse Generator - Haibing Wang

13:40 The Design of a 70kA/20kV Two-section Pyrobreaker for Quench Protection - Jun He (Institute of Plasma Physics)

13:40 DESIGN OF CURRENT-PULSE POWER SUPPLY FOR TEARING MODE CONTROL ON THE J-TEXT TOKAMAK - Li Mao (Huazhong University of Science and Technology)

13:40 An Integration method of Hybrid Power Filter for Specific Harmonic Suppression in Tokamak Power System - Jing Lu (ASIPP Hefei Anhui)

13:40 Research on the Method of Reactive Power Detection for Tokamak Coil Power Supply Based on AC/DC System Active Power Balance - Yanan Wu (ASIPP)

13:40 Application of automatic ultrasonic testing system based on joint robot in Fusion Engineering - rui wang

13:40 Experimental Investigation on the Second Commutating Process of a Quench Protection Switch - Sheng Li

13:40 Structural Integrity Report of Neutron Flux Monitor at occluded EqP#07 (PBS 55.B4.D0) - Jun Li

13:40 Recent progress of pellet injection system in Experimental Advanced Superconducting Tokamak - Xingjia Yao (ASIPP)

13:40 The Disturbance Analysis for Ultrasonic Doppler Profile Measurements Through Numerical Simulation - wangli huang

13:40 Three confinement systems - Spherical Tokamak, Advanced Tokamak and Stellarator: A comparison of key component cost elements - Thomas Brown (Princeton Plasma Physics Laboratory)

13:40 A Method to Alleviate the Long History Problem Encountered in Monte Carlo Simulations via Weight Window Variance Reduction - jia li

13:40 Physics and Geometry Design of Lower Divertor Upgrade in EAST Tokamak - Houchang Xu (Institute of Plasma Physics, Chinese Academy of Sciences, University of Science and Technology of China, Hefei University. )

13:40 Pumping Performance Calculation of HL-2M in-vessel Cryopump based on Monte Carlo method - Yong Li (Southwestern Institute of Physics)

13:40 Measurement system of PSM HVPS for neutral beam injection on HL-2A - yali wang (SWIP)

13:40 Design and implement of Varying Frequency Three-phase Synchronous Signal processing system Based on modern signal processing - Weibin Li (SWIP)

13:40 Design and Installation of Small Angle Slot (SAS) Divertor in DIII-D - Chris Murphy (General Atomics DIII-D)

13:40 Modeling and analysis on the six-phase generator - converter system as the magnetic field power supply of HL-2A/M - Xiaolong Liu (Southwestern Institute of Physics, Chengdu, China)

13:40 Fast Boundary Reconstruction from Tangentially Viewed Visible Images for Plasma Control in EAST - Heng Zhang

13:40 Analysis of non-inductively high-performance discharges - Qin Hang

13:40 Design and Fabrication Process of Toroidal Field Coil for HL-2M - Yin Qiu

13:40 Electrical and Magnetic Analyses and Design of New NSTX-U PF1A Coil - Zhi Gao (pppl)

13:40 Establish full covering liquid metal film flows under poor wettability conditions for liquid divertor of fusion reactor - Xiujie Zhang (Southwestern Institute of Physics)

13:40 Electromagnetic Analysis of the ITER Glow Discharge Cleaning Electrode in Equatorial Port No.12 - Lijun Cai

13:40 Multi-scenario evaluation and electromagnetic loads on CFETR VV mockup during MD event - Ni Xiaojun (ASIPP)

13:40 A New User Front-End for EAST Remote Participation - Xiaoyang Sun (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Pebble Bed Thermo-mechanical Modeling for Water Cooled Ceramic Breeder Blanket for CFETR - Lei Chen (Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP))

13:40 Thermal hydraulic analysis for one water cooled blanket module of CFETR based on RELAP5 - Shuang Lin (Uiniversity of Sicence and Technology of China)

13:40 Prediction of departure from nuclear boiling in the first wall of WCCB blanket for CFETR - Kecheng Jiang (Institute of Plasma Physics Chinese Academy of Science;University of Science and Technology of China)

13:40 A flexible web visualization framework for nuclear fusion experiment data - Kuanhong Wan (Huazhong University of Science and Technology)

13:40 Preliminary Cooling Channel Design and Thermal-hydraulic Analysis of GDC PE in UPP14 - Yong LU (SWIP)

13:40 Power control system of 4.6GHz Lower hybrid wave for experimental advanced superconducting tokmak - Wendong Ma (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Structural design and analysis of the feeder in the CFETR CS model coil - Liang Guo

13:40 Degradation of Neutral Beam heating & current drive by Alfvénic instabilities - Mario Podesta (Princeton Plasma Physics Laboratory)

13:40 PRELIMINARY DESIGN FOR THE FIRST WALL IN WEAK MAGNETIC SIDE OF HL-2M PROJECT - Tao Lin (Center for Fusion Science of Southwestern Institute of Physics)

13:40 Analysis and derivation of the EU-DEMO high level plant requirements - Matti Coleman (UKAEA / EUROfusion)

13:40 Design and Analysis of “Filling-Evacuating” High-Pressure Helium-Cooled Loop - Haifei Deng (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Investigation on the Effect of Tritium Production using Temperature Control for DEMO Blanket - Yang Qiu (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Computational study of the elastic modulus of mixed pebble beds for WCSB - Yuanjie Li (University of Schience and Technology of China)

13:40 A numerical model of RF ion source for the ITER-relevant NBI - Xingquan Wu

13:40 Experimental study on vacuum control method for Paschen tests of the superconducting magnet - Zhirong Zhang

13:40 Design and Analysis of CFETR CSMC Cooling Loop - Qiangwang Hao (ASIPP)

13:40 Test results about simple CDA+MIK quench detection method on EAST for ITER Superconducting CS Coils - HU Yanlan (Asipp)

13:40 0-D Physical Design for the Heating and Current Drive System of CFETR - Defeng Kong (ASIPP)

13:40 Research and design of microwave diagnostics on CFETR - Hao Qu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Study on dynamic behavior of EAST upper divertor with vertical displacement events - Xinyuan Qian (School of Nuclear Science and Technology, University of Science and Technology of China)

13:40 The vacuum ultraviolet imaging system and its application on EAST - Tingfeng Ming (Institute of Plasma Physics, Chinese Academic Sciences)

13:40 Study of electromagnetic effects induced by huge plasma current variations for EAST CS coils quench detection - Teng Wang (ASIPP)

13:40 Multiphysics Modeling of the FW/Blanket of the U.S. Fusion Nuclear Science Facility (FNSF) - Yue Huang (UCLA)

13:40 NBImag: a useful tool in the design of magnetic systems for the ITER Neutral Beam Injectors - Daniele Aprile (INFN-LNL)

13:40 Preliminary mechanism analysis of HyperVapotron experiment for high heat flux components - Delin Chu

13:40 Design of the optical emission spectroscopy diagnostic system and preliminary experimental results in RF negative ion source - yan wang

13:40 3D numerical simulations of hypervapotron geometry on Thermalhydraulic Performance - Ran Wei (ASIPP)

13:40 The offline simulation module of J-TEXT Real-Time Framework - Yang Li (Huazhong University of Science and Technology)

13:40 Performance analysis on the VUV imaging system in EAST tokamak - Zhijun Wang

13:40 The influence of heat transfer on MHD flow in the blanket at high Hartmann Number - Jiajia Han

13:40 Ultrafine Pt nanoparticles on superhydrophobic 3D graphene aerogel for hydrogen-water exchange reaction - Xiaolong Fu

13:40 Thermal-hydraulic analysis of high temperature superconducting magnets in CFETR - Junjun Li (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Application of ZD REDOX Detection Technology for Measuring Hydrogen Isotopes in Tritium Extraction System - xiao chengjian (Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics)

13:40 Upgrade of data acquisition and control system for microwave reflectometry on EAST - Fei Wen (Institution of Plasma Physics, Chinese Academy of Sciences)

13:40 Design of a robust linear and rotary sensor compatible with hostile environmental conditions - Carlo Neri (ENEA)

13:40 NUMERICAL STUDY OF INTERATION BETWEEN THERMAL STRESS OF THE FIRST WALL AND COOLANT DUCT BY LIQUID-SOLID COUPLED METHOD IN FUSION REACTOR BLANKET - Hongyan WANG (Nanjing Institute of Technology)

13:40 Optimization and Design of Divertor Langmuir Probe Diagnostic System on the EAST Tokamak - Jichan Xu (ASIPP; USTC)

13:40 Structural Stress Analysis of the CFETR CS Model Coil - Aihua Xu (institute of plasma physics Chinese academy of sciences)

13:40 Application of laser-induced breakdown spectroscopy (LIBS) for in situ characterization of lithium deposition layer on EAST tokamak - Zhenhua Hu

13:40 Thermo-Hydraulic Performance Testing for Plasma Facing Components by 3D Metal Printing Technology - Suk-Kwon Kim (Korea Atomic Energy Research Institute)

13:40 Curent Status Concerning Tritium Removal Technology and its Implementation at Cernavoda NPP(ROMANIA) - Gheorghe Ionita (ICSI Rm-Valcea)

13:40 Analysis and experimental study of impedance matching characteristic of RF ion source on neutral beam injector - Caichao Jiang (ASIPP)

13:40 Thermomechanical Assessment of the K-DEMO Divertor Target Applying CuCrZr and RAFM as Heat Sink Materials - Sungjin Kwon (National Fusion Research Institute)

13:40 A Maxmium Current Control Strategy for Three-phase PWM Rectifier for the ITER In-Vessel Vertical Stability Coil Power Supply - Kun Qian (Institute of Plasma Physics)

13:40 Experimental Study on Multilayer Liquid Metal Film Flow Characteristics under Horizontal Magnetic field - Yang Juan-Cheng (Xi'an Jiaotong University)

13:40 The Influences of irradiation defects on mechanical properties for ceramic breeder material Li2TiO3 - jing wang

13:40 Experimental Study on the Liquid Lithium Film Flow characteristics under Spanwise direction Magnetic field - Ni Ming-Jiu (University of Chinese Academy and Sciences)

13:40 Shutdown Dose Rate Calculation for the Preliminary Concept of K-DEMO Equatorial Port Area - Jongsung Park (National Fusion Research Institute)

13:40 REFMULF: 2D Full-wave FDTD Full Polarization Maxwell Code - Filipe da Silva (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa)

13:40 Qualification of ITER PF6 Helium Inlet - shuangsong Du

13:40 Study of fire impact on detritiation of atmosphere in tritium handling facility: catalytic oxidation of fume gas produced by cable burning - Mikhail Rozenkevich (D. Mendeleev University of Chemical Technology of Russia)

13:40 Evaluation of the distribution of C5+ and Li2+ by the VUV imaging system on EAST - Fan Zhou (Institute of Plasma Physics, Chinese Academic Sciences, Hefei, China; Science Island Branch of Graduate School, University of Science and Technology of China, Hefei, China)

13:40 STOCHASTIC COST ANALYSIS OF STEADY STATE AND PULSED DEMO-LIKE FUSION POWER PLANTS - Giuseppe Zollino (Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), University of Padova, Department of Industrial Engineering )

13:40 Endoscope Emulator Test Stand for ITER Dust Monitor Diagnostic - Evgeny Veshchev (ITER Organization)

13:40 Study of plasma density effects on the divertor power width of EAST by SOLPS5.0/B2.5-Eirene - Guozhong Deng (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Manufacture and Electrical Properties of Instrumentation Wire Extraction Specimens for the ITER Feeder HV Insulation - Fang Linlin

13:40 Heat transfer and Structural analyses of a water cooled tube under one-sided heating conditions for fusion reactor divertor - Liu Ping

13:40 DESIGN OF A HIGH RESOLUTION PROBE (HRP) HEAD FOR ELECTROMAGNETIC TURBULENCE INVESTIGATIONS IN W7-X - Piero Agostinetti (Consorzio RFX)

13:40 Comparison of Deformation Models of Flexible Manipulator Joints for use in DEMO - Ming Li (Lappeenranta University of Technology)

13:40 Cooling Needs and Thermal Hydraulic Design Studies of Diagnostic Shielding Module of US ITER Port Plugs - Yuhu Zhai (Princeton Plasma Physics Laboratory)

13:40 DEVELOPMENT OF RADIATION HARD AND MAGNETIC FIELD COMPATIBLE VACUUM GAUGES FOR THE ITER PROJECT - Bastien Boussier (ITER Organization)

13:40 The deuterium retention behavior in helium irradiated tungsten after plasma exposures in EAST - Mingzhong Zhao (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Development of Neural-Network Potentials for Atomistic Modelling of PWI - Lei Chen (University of Innsbruck, Austria)

13:40 Simulation of turbulent plasma heat flux to the DEMO first wall - Sergey Pestchanyi (KIT)

13:40 Some Properties of Beryllium Pebbles Produced by Powder Metallurgy for HCPB Breeding Blanket Application - Igor Kupriyanov (A.A. Bochvar High Technology research Institute of Inorganic Ma)

13:40 Flow Test at Factory for ITER Thermal Shield - Kwanwoo Nam (ITER Korea)

13:40 Advanced shape design with F2EQ code in CFETR - Zhengping Luo (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Micro perspective on anti-fatigue performance enhancement of PFC metal welding interface with MD simulation - Xuan Wang

13:40 The Analysis of Socio-economic Impact on Big Science R&D: Focusing on Fusion R&D Program in Korea - Wonjae Choi (National Fusion Research Institute)

13:40 Analysis on Phase array ultrasonic signals of the ITER PF jacket inspection - xiaochuan Liu (ASIPP)

13:40 INTEGRATION OF METALLIC SEALS ON CIRCULAR FLANGES FOR NEUTRAL BEAM FRONT END COMPONENTS - Marc Urbani (ITER Organization)

13:40 Charactarization of Low Energy Plasmas in the device PG-QRO-1 - Gonzalo Ramos (Instituto Politecnico Nacional)
15:40 Break
Break
15:40 - 16:00
16:00
16:00 - 18:00
Room: Salon 1
Contributions

16:00 The ITER Power Supplies: status and recommendations for the next tokamaks - Ivone Benfatto (ITER Organization)

16:20 THE POWER SUPPLY SYSTEM OF SPIDER - Loris Zanotto (Consorzio RFX)

16:40 DESIGN AND MANUFACTURING OF THE SIC-BASED POWER SUPPLY SYSTEM FOR RESISTIVE-WALL-MODE CONTROL IN JT-60SA - Alberto Ferro (Consorzio RFX)

17:00 Development of HL-2M power supply system - Yingqiao WANG (Southwestern Institute of Physics)

17:20 Fuzzy Controller using Circulating mode for ITER Poloidal Field (PF) AC/DC Converter System - Mahmood ul Hassan (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China)
16:00 - 18:00
Room: Salon 2
Contributions

16:00 Brief History and Status of Cryogenic Pellets in Fusion Energy Research - Stephen K. Combs (Oak Ridge National Laboratory)

16:20 DESIGN OF CRYOGENIC TWIN SCREW HYDROGEN EXTRUDER SYSTEM - Samiran Shanti Mukherjee (Institute for Plasma Research, India)

16:40 Core fueling of DEMO by direct line injection of high-speed pellets from the HFS - Antonio Frattolillo (ENEA C.R. Frascati)

17:00 Refined Multiphysics Analysis of W7-X Cryopumps - Jiawu Zhu (Max-Planck-Institut für Plasmaphysik)

17:20 SUB-DIVERTOR NEUTRAL GAS DYNAMICS: INTEGRATION BETWEEN THE VACUUM SYSTEM AND THE DIVERTOR OPERATION - Stylianos Varoutis (Karlsruhe Institute of Technology (KIT))

17:40 Hydrogen Isotope Separation by Cryogenic Chromatography in Processing Tokamak Exhaust Gas - Chengjian Xiao (Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics)
16:00 - 18:00
Room: Salon 3
Contributions

16:00 STATUS ON DESIGN AND CONSTRUCTION OF THE ITER BUILDINGS AND PLANT SYSTEMS - Ingo Kuehn (ITER)

16:20 Preparation of ITER Tokamak Assembly and Tooling - Jens Reich (ITER Organization)

16:40 Assessing Component Suitability and Optimising Plant Design – Alternative Approaches to TRLs - Elizabeth Surrey (UKAEA)

17:00 Extent of Condition Review of the NSTX-U Project - Charles Neumeyer (PPPL)

17:20 Project co-ordination challenges during W7-X completion - Axel Lorenz (IPP Greifswald)

17:40 Early lessons from the application of Systems Engineering at UKAEA - Dan Wolff (UKAEA)
Wednesday 7 June 2017
08:00
08:00 - 10:10
Room: Grand Ballroom
Contributions

08:00 Announcements

08:10 Technical Progress of EAST Tokamak - Yuntao Song (Institute of Plasma Physics, Chinese Academy of Sciences)

08:50 Overview of US ITER Domestic Agency progress - Graeme Murdoch (Oak Ridge National Laboratory)

09:30 Status of IFMIF Project: is it still talking about IFMIF like talking of Alice in Wonderland? - Knaster Juan (IFMIF/EVEDA (F4E))
10:10 Break
Break
10:10 - 10:40
10:40
10:40 - 12:40
Room: Salon 1
Contributions

10:40 Integrating Materials Engineering and Design for Fusion - Michael Gorley (Culham Centre for Fusion Energy)

11:00 Material Solutions for Flow Channel Inserts for Liquid Metal Blankets - Yutai Katoh (Oak Ridge National Laboratory)

11:20 Effect of Heat Treatment on Anisotropic Tensile Behavior of CLAM Steel Fabricated by Additive Manufacturing - Yutao Zhai (Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

11:40 Synergetic effects of He ions irradiation and oxidation on W - Yi-Ming Lyu (Institute of Plasma Physics, Chinese Academy of Sciences)

12:00 Tungsten-steel composites fabricated by roll bonding and ultrasonic welding for structural use in plasma-facing components - Lauren Garrison (Oak Ridge National Laboratory)

12:20 Experiemnt investigation on heat transfer performance enhancement of PFC hypervapotron by micro surface manipulation technology - Shenghong Huang (supervisor)
10:40 - 12:40
Room: Salon 2
Contributions

10:40 A Review of Recent Studies on Liquid Metal Plasma-Facing Components - Yoshi Hirooka (National Institute for Fusion Science and Graduate University for Advanced Studies)

11:00 Recent results of Li experiments in EAST with W divertor - Guizhong Zuo (Institute of Plasma Physics CAS)

11:20 Testing Liquid Metal/Capillary Porous System Concepts as alternative solution for the Divertor target design of a Fusion Reactor in TJ-II. - Francisco Tabares (CIEMAT)

11:40 Synergies in Liquid Metal Technology Development for Divertor Applications* - Robert Kaita (Princeton Plasma Physics Laboratory)

12:00 Investigation of an upgraded flowing liquid lithium limiter for higher performance plasmas in tungsten divertor in EAST - Guizhong Zuo (Institue of Plasma Physics, Chinese Academy of Sciences)

12:20 Advancement of LiMIT and Associated Technologies - Matthew Szott (University of Illinois at Urbana-Champaign)
10:40 - 12:40
Room: Salon 3
Contributions

10:40 Development and application of advanced nuclear software SuperMC for fusion - Jing Song (Institute of Nuclear Energy Safety Technology, CAS · FDS Team)

11:00 SuperMC Benchmark with SINBAD - Lijuan Hao (Institute of Nuclear Energy Safety Technology, CAS · FDS Team)

11:20 Development and Validation of Cryostat Finite Element Model with Unique FE Method - TARUN KUMAR SHARMA (ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

11:40 Nuclear and Thermal Analysis of a Reflectometry Diagnostics Concept for DEMO - Raul Luís (Instituto dos Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa)

12:00 Design, Research and Development of CFETR Vacuum Vessel - LU kun (Institute of Plasma Physics, Chinese Academy of Sciences)

12:20 Estimate of Air Activation at the ITER Neutral Beam Test Facility - Sandro Sandri (ENEA)
12:40 Lunch
Lunch
12:40 - 13:40
Room: Shanghai City Bistro/EZO Restaurant
13:40
13:40 - 15:40
Room: Junior Ballroom
Contributions

13:40 Web Services for 3D MHD Equilibrium Data at Wendelstein 7-X - Michael Grahl (Max-Planck-Institut für Plasmaphysik)

13:40 Impact of plasma configuration on impurity and density control during long pulse discharges in EAST - Hongmin Mao (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 ACTIVE RECYCLING CONTROL THROUGH LITHIUM INJECTION IN EAST - John Canik (Oak Ridge National Laboratory)

13:40 Engineering overview of the Fusion Research in Costa Rica: SCR-1 Stellarator and Spherical Tokamak MEDUSA-CR - C. Otarola (Plasma Laboratory for Fusion Energy and Applications, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica)

13:40 PHYSICS OF THE HIGH FIELD ULTRA LOW ASPECT RATIO TOKAMAK - Celso Ribeiro

13:40 Winding Design for CFETR Central Solenoid Model Coil - Houxiang HAN

13:40 Type Tests of JT-60SA Central Solenoid / Equilibrium Field (CS/EF) Super-Conducting Magnet Power Supplies - Pietro Zito (ENEA)

13:40 Preliminary Design of Laser-Induced Breakdown Spectroscopy Diagnostic for Divertor Analysis in EAST - Cong Li (Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Chinese Ministry of Education, School of Physics and Optical Electronic Technology, Dalian University of Technology, 116024 Dalian, P. R. China & Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Plasmaphysik, Partner of the Trilateral Euregio Cluster (TEC), 52425 Jülich, Germany)

13:40 Innovative H&CD designs and the impact of their configurations on the performance of the EU DEMO fusion power plant reactor - Thomas Franke (EUROfusion Consortium)

13:40 Study on helium-induced hardening due to interaction between helium bubbles and edge dislocation by molecular dynamics simulation - Xing Liu (University of Science and Technology of China)

13:40 Prototype design of a 700 C in-vacuum blackbody source for in-situ calibration of the ITER ECE diagnostic* - Andrei Khodak (Princeton Plasma Physics Laboratory)

13:40 The SF6 Gas Handling and Storage Plant of the MITICA test facility - Loris Zanotto (Consorzio RFX)

13:40 Study of pumping speed of Activated Carbon based Cryosorption Pump - Dinesh Hosamani (Manipal Institute of Technology)

13:40 Modeling of pre-Thermal Quench and Thermal Quench stages of disruption induced by Massive Gas Injection in ITER - Vladimir Leonov (NRC"Kurchatov Institute")

13:40 Recent improvement of the design of the ITER steady-state magnetic sensors - Slavomir Entler (Institute of Plasma Physics of the CAS)

13:40 A preliminary consideration of CFETR diagnostic system - Yao Yang (Institute of Plasma Physics, Chinese Academy of Science)

13:40 Design and optimization of cooling channels for 4-strap ICRF antenna of EAST - Song Wei

13:40 Numerical analysis of fracture behavior of first wall subjected to electromagnetic force during plasma disruption - Cuixiang Pei (Xi'an Jiaotong University)

13:40 ZrCo bed as Protium and Deuterium storage material - Xingbo Han (Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai)

13:40 A ZCS AC/DC Converter with LCL - Qin Hang

13:40 Classification of TBM components for construction code application - Dong Jun Kim (Korea Atomic Energy Research Institute)

13:40 A Novel Power Supply Design for Multistage Depressed Collector Gyrotrons - Simon Keens (Ampegon AG)

13:40 Development of I&C main functions for ITER VUV spectrometers and prototype test at KSTAR - YoungHwa An

13:40 Measurements and model calculations of activation reaction rate for (n,p) reaction on 54Fe isotope - Wuhui Chen (Institute of Plasma Physics Chinese Academy of Sciences. School of Nuclear Science and Technology.)

13:40 A new concept to achieve a higher fuel burn-up fraction in a DEMO reactor - Yuri Igitkhanov (KIT, Germany)

13:40 Cryopump development of the 5MW NBI system on HL-2M tokamak - Xianfu Yang (Southwestern Institute of Physics)

13:40 Design and optimization of the CFETR breeding blanket with S-type cooling pipes in BU - chenyu xu (university of science and technology of china)

13:40 An Active Gate Control for Press-Pack IGBTs in Series applied for high-voltage switch - Dongyu Wang

13:40 Research on Synchronous Data Network of J-TEXT Plasma Control System - Yuan Pan (Huazhong University of Science and Technology)

13:40 Design of the optical emission spectroscopy diagnostic system and preliminary experimental results in RF negative ion source - yan wang

13:40 Design of a high power and low parasitic inductance resistor - Xinke Ji

13:40 Control system designed for the electron cyclotron resonance heating system on J-TEXT - Z.X. Yu (self)

13:40 Design of the Alfvén Eigenmodes excitation power supply on J-TEXT - Song Zhou (Huazhong University of Science and Technology)

13:40 Investigation of the contact resistance between the pebble beds and the box wall surface in the gas flow condition - Seong Dae Park (Korea Atomic Energy Research Institute)

13:40 Design of High Precision Power Supply Control System for ITER Platform - Peng Ju (Institute of Plasma Physics， Chinese Academy of Science)

13:40 Progress on the Design Development for Hard Core Components (HCC) for ITER Diagnostic System - Jorge Rafael Gonzalez Teodoro (PPPL)

13:40 Effect of coolant mass flow rate on flow pulsation in a simplified channel system of CFETR WCCB blanket - Min Li (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Neutronics Analysis of Helium Cooled Ceramic Breeder Blanket with S-shaped Lithium zone and Cooling Pipes for CFETR - Yudong Lu (University of Science and Technology of China)

13:40 GPU parallel Grad-Shafranov solver for real-time equilibrium reconstruction - Yao Huang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Liquid metal natural convection research heat transfer in the presence of a transverse magnetic field - Wang Z H

13:40 Coupling analysis of the HCCB blanket under electromagnetic, thermal and mechanical loads - Ming Wang

13:40 Cooling concepts for CFETR divertor target - Xuebing PENG (Insititute of Plasma Physics, Chinese Academy of Sciences)

13:40 The analysis of shielding performance for toroidal field coils of CFETR - Wei Shi

13:40 Deuterium permeation and retention behavior in a martensitic/ferritic steel - Hao-Dong Liu

13:40 Deuterium transport and retention in a liquid metal Gallium under steady state plasma bombardment - Halin Bi (National Institute for Fusion Science (NIFS))

13:40 Hydrogen isotopes plasma-driven permeation through sputter-deposited tungsten coated F82H - Yue Xu (The Graduate University for Advanced Studies)

13:40 Structural Concept Design Of CFETR CS Model Coil - Dapeng Yin (ASIPP)

13:40 Swirl tube design of the pole shiled in the magnet for the long pulse upgrades of EAST-NBI based on the subcooled boiling - ling Tao (Institute of Plasma Physics Chinese Academy of Sciences)

13:40 Evaluation of spatial resolution of neutron profile monitor in LHD - Hiroki Kawase (SOKENDAI)

13:40 Corrosion test results of ARAA and FMS steel in the Experimental loop for liquid breeder - Jae Sung Yoon (Korea Atomic Energy Research Institute)

13:40 Signal transmission links for the electron cyclotron resonance heating system on J-TEXT - Fangtai Cui

13:40 Research and Analysis on Electrical Performance of EAST Cryogenic Axial Insulation Breaks - Cheng Wu

13:40 Design and Analysis of Magnet System for Flili Testbed in EAST - Lexing Hu (ASIPP)

13:40 The management and storage of EAST diagnostic data - Feng WANG (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Use Spectrum Simulation Code SOS to test the performance of the Fast ion D-alpha spectrum on HL-2A - P. Chen (University of Electronic Science and Technology)

13:40 Design & Development of High Voltage Power Suppliy for Negative Ion Source - Meichu Huang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Performance of full compositional W/Cu functionally gradient materials under quasi-steady state heat load - Baoguo Wang (University of Science and Technology of China)

13:40 DEVELOPMENT AND VERIFICATION OF COMPUTATIONAL MODEL FOR CONTROL OF PLASMA AND HALO CURRENT IN EAST TOKAMAK - Mahmood Ul Hassan

13:40 Qualification of ITER Correction Coil Superconductor Joint - Lin Wang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Evaluation of tritium inventory and permeation in water-cooled ceramic breeder blanket for CFETR - Kai Huang (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 Development of off-axis beamline for KSTAR - Sangwook Jung (National Fusion Research Institute)

13:40 Hydrogen Effects on Properties of ICP Sprayed Boron Carbide Coatings - Qijia Guo (Institute of Plasma Physics, Hefei institutes of Physical Sciences, Chinese Academy of Sciences )

13:40 Plasma Control Requirements for Commercial Fusion Power Plants: A Quantitative Scenario Analysis with a Dynamic Fusion Power Plant Model - Shutaro Takeda (Kyoto University)

13:40 The influence of ELMs on low cycle fatigue behavior of ITER-like divertor target - Shenghong Huang (supervisor)

13:40 Analysis of Dogleg Duct Experiments with 14 MeV Neutron Source Using TRIPOLI-4 Monte Carlo Transport Code - Mingzhun LEI (Institute of Plasma Physics, Chinese Academy of Sciences. )

13:40 High Priority Prototype Testing in support of System Level Design development of the ITER Radial Neutron Camera - Marco Riva (ENEA)

13:40 Boron Carbide Coating on Tungsten By ICP Thermal Spraying - Qiujiao Zhou

13:40 Study of a plasma boundary reconstruction method based on reflectometric measurements for control purposes - Giuseppe Marchiori (Consorzio RFX)

13:40 The LIPAc Beam Dump - Beatriz Brañas (CIEMAT)

13:40 Design and setup of the High Voltage Radio Frequency Test Facility for the characterization of the dielectric strength in vacuum of RF drivers for Neutral Beam Injectors Ion Sources - Alberto Maistrello (Consorzio RFX)

13:40 Challenges for the Wendelstein 7-X magnet systems during the next operation phase - Thomas Rummel (Max-Planck-Institute for Plasma Physics)

13:40 Design of 11 MA Snowflake divertor configurations of CFETR - Hang Li (Institute of Plasma Physics, Chinese Academy of Sciences;Science Island Branch of Graduate School, University of Science and Technology of China)

13:40 Developing the Simulation of Spectra Code Based on HL-2A tokamak Motional Stark Effect and Beam Emission Spectroscopy - Y.C CHEN

13:40 Application of Gaussian Processes for predicting tritium breeding ratio in the helium cooled pebble bed breeder blanket - Shimwell Jonathan (CCFE)

13:40 First measurement of LiIII charge exchange line on EAST tokamak - yingying li (Institute of Plasma Physics, Chinese Academy of Sciences,)

13:40 Profile Tolerances influence on Cryostat Base Section - SARBJEET SINGH SANDHU (ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India)

13:40 Inspection Method for Delamination Defect in First Wall Panel of Tokamak Device by using Laser Infrared Thermography Technique - Haochen Liu (Xi’an Jiaotong University)

13:40 Structural and thermal analysis of a distributed ICRF antenna integrated in European DEMO blanket - Amro Bader (Max-Planck-Institut für Plasmaphysik)

13:40 Preliminary progress of the divertor module in CFETR system code - Jianwu Zhang (University of Science and Technology of China)

13:40 Irradiation effects on lifetime of first wall structure materials for CFETR - Lei Peng (University of Science and Technology of China)

13:40 Manufacturing design assessment of the welded in-wall shield rib for ITER - YuGyeong Kim (NFRI)

13:40 Concept of the integrated environment of management by large scientific projects - Subbotin Mikhail (NRC "Kurchatov Institute")

13:40 Anisotropic neutron emission spectrum and its utilization for verification of nuclear elastic scattering effect in proton-beam-injected deuterium plasmas - Hideaki Matsuura (Kyushu University)

13:40 VARID: Virtual and Augmented Reality Integrated Development Facility for Research in Remote Handling and Maintenance of Tokamaks - Pramit Dutta (Institute for Plasma Research)

13:40 Monitoring, Modeling, and Protecting Against Insulation Failures in the NSTX-U TF Outer Legs - Peter Titus (Princeton Plasma Physics Laboratory)

13:40 Assessment of Cavitation Erosion Risk in the Liquid-Lithium Flow in IFMIF-DONES - Sergej Gordeev (Karlsruhe Institute of Technology)

13:40 Observation scenario of knock-on-tail shape using Doppler-broadening - Yasuko Kawamoto (Kyushu University)

13:40 MOLECULAR DYNAMICS STUDY ON EFFECT OF GBS MISORITENTION ANGLE ON GBS HELIUM EMBRITTLEMENT IN BCC IRON - Jingyi Shi (University of science and technology of China)

13:40 Design of a dual-band IR imaging system for surface temperature measurements on the tungsten divertor in EAST - kaifu gan (university of Tennessee, Knoxville)

13:40 Engineering Design Modules on CFETR Integration Design Platform - Yang Li (University of Science and Technology of China)

13:40 Studies on DEMO Toroidal Field Circuit - Alberto Maistrello (Consorzio RFX)

13:40 Effects of the J-TEXT TBM mock-up on the equilibrium magnetic field and error field - Zhengqing Zhang

13:40 Deuterium retention in tungsten exposed to KSTAR plasmas - Jing Wu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:40 3MW Dual Output High Voltage Power Supply Operation: Results for Accuracy, Stability and Protection Test - AMIT PATEL (ITER-INDIA , INSTITUTE FOR PLASMA RESEARCH)

13:40 Personnel Safety at Magnetic Fusion Experiments - Lee Cadwallader (Idaho National Lab/Battelle Energy Alliance)

13:40 Modeling and Qualifying Operational and Cooldown Strains of the NSTX-U PF1a Coils - Peter Titus (Princeton Plasma Physics Laboratory)

13:40 An Overview of NSTX-U Diagnostics - Robert Ellis (Princeton Plasma Physics Laboratory)

13:40 The Proposed Improvement for Neutral Beam Injection Power Supply System - Austin Lowder (Miami University)

13:40 Dynamics and control of droplet splashing from tungsten divertor materials generated by ELM-like heat loads - M Nagata (University of Hyogo)

13:40 Design of the dimensional metrology and alignment scheme for the 1/32 CFETR VV Mock-up - Yongqi GU

13:40 Improved thermal performance of an updated NSTX-U inner divertor - Sibilia Marc (PPPL)

13:40 Designing for Tokamak Emergent Behaviour using a Hierarchical Systems Engineering Architecture Design Process - Rob Ellis (UKAEA)

13:40 Neutronic study and shielding performance analyses for CFETR blankets - Shuling Xu

13:40 Final acceptance test of the Ion Source and Extraction Power Supplies for the SPIDER experiment - Andrea Zamengo (Consorzio RFX)

13:40 Advanced Plasma Diagnostic Analysis using Neural Networks - Kevin Tritz (Johns Hopkins University)

13:40 Steady State and Transient Thermal Analysis of the Updated Helium Cooled Solid Breeder Blanket for CFETR - Guangming Zhou (University of Science and Technology of China)

13:40 Hydrogen isotope permeation through tungsten deposition layer formed on Ni plate by plasma sputtering method - Daisuke Mori (Kyushu University)

13:40 TCAP hidrogen isotope separation process under development at ICSI Rm. Valcea - George Ana (ICSI Rm. Valcea)

13:40 Multi-design Innovative Cooling Research & Optimization (MICRO): a novel set of optimized solutions for enhanced heat transfer in DEMO - Giulio Gambetta (Università degli Studi di Padova)

13:40 An Equation of State and Compendium of Thermophysical Properties of Liquid Tin, a Prospective Plasma-Facing Material - Paul W. Humrickhouse (Idaho National Laboratory)

13:40 CURRENT STATUS OF THE EU DEMO VACUUM SYSTEMS - Christian Day (KIT)

13:40 A New Parallel IGBT Current Sharing Control for Tokamak Vertical Stabilization Current Supply System - Lu Yue (University at Buffalo)
15:40 Break
Break
15:40 - 16:00
16:00
16:00 - 18:00
Room: Salon 1
Contributions

16:00 Commissioning of the Wendelstein 7-X In Vessel Control Coils - Frank Füllenbach (Max-Planck-Institut für Plasmaphysik)

16:40 Fabrication Status of ITER Central Solenoid Modules - John Smith (General Atomics)

17:20 Progress and Study on the Superconducting Magnet System of China Fusion Engineering Test Reactor - Jinxing Zheng (Institute of Plasma Physics, Chinese Academy of Sciences)

17:40 Development and applications of Magnets module for SYCOMORE CEA system code - Louis ZANI (CEA-IRFM)
16:00 - 18:00
Room: Salon 2
Contributions

16:20 Smoothly Varying Injected Neutral Beam Voltage and Current Provides New Capability on the DIII-D Tokamak* - Tim Scoville (General Atomics)

16:40 Conceptual Design of a 2-Channel Steady-State ECH Launcher for KSTAR - Robert Ellis (Princeton Plasma Physics Laboratory)

17:00 Design, Test and Analysis of a Gyrotron Cavity Mock-up cooled using Mini-Channels - Laura Savoldi (NEMO group, Dipartimento Energia, Politecnico di Torino)

17:20 Towards a new generation of high power high efficiency neutral beam heating system for the future fusion reactors - alain Simonin (CEA)

17:40 OPTICS AND THERMO-MECHANICAL ANALYSIS OF THE ACCELERATOR FOR THE DEMO NEUTRAL BEAM INJECTOR - Piero Agostinetti (Consorzio RFX)
16:00 - 18:00
Room: Salon 3
Contributions

16:00 Progress in design activities related to the water cooled breeder blanket for CFETR Phase-I - Songlin Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

16:20 Overview of the HCPB Research Activities in EUROfusion - Francisco Hernandez (Karlsruhe Institute of Technology)

16:40 Study of the pebble beds for tritium breeding blanket - Hongli Chen

17:00 3D Unsteady Model for Be-steam Reaction in Water Cooled Ceramic Breeder Blanket - Andrei Khodak (Princeton Plasma Physics Laboratory)

17:20 Tritium release from Li4SiO4: The effect of material properties - Guangming Ran

17:40 Parametric analysis of the EU DEMO HCPB breeding blanket thermal-hydraulic transient operation using the GETTHEM code - Roberto Zanino (NEMO group, Dipartimento Energia, Politecnico di Torino)
19:00 Banquet
Banquet
19:00 - 22:00
Room: Shunfeng Restaurant
Thursday 8 June 2017
08:30
08:30 - 10:00
Room: Grand Ballroom
Contributions

08:30 Announcements

08:40 Prospect towards steady-state helical fusion reactor based on progress of LHD project entering the deuterium experiment phase - Yasuhiko Takeiri (National Institute for Fusion Science, National Institutes of Natural Sciences)

09:20 Engineering Challenges in W7-X and preparations for the second operation phase - Hans-Stephan Bosch (MPI for Plasma Physics)
10:00 Break
Break
10:00 - 10:20
10:20
10:20 - 11:40
Room: Grand Ballroom
Contributions

10:20 Status and Plans on MAST-U - Joseph Milnes (UKAEA)

11:00 Progress of Fusion Technology at SWIP toward Reactor - Yong Liu (Southwestern Institute of Physics (SWIP))
11:40 Lunch
Lunch
11:40 - 12:40
12:40
12:40 - 14:40
Room: Salon 1
Contributions

12:40 Neutron Diagnostics in the Large Helical Device - Mitsutaka Isobe (National Institute for Fusion Science, National Institutes of Natural Sciences, SOKENDAI(The Graduate University for Advanced Studies))

13:00 Joint plasma pressure diagnostic system of Beam Emission Spectroscopy and Ultrafast Charge eXchange Recombination Spectroscopy on EAST tokamak - Yi Yu (University of Science and Technology of China)

13:40 Estimation of X-mode reflectometry first fringe frequency using neural networks - Diogo E. Aguiam (Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal)

14:00 In situ and real time observation of tritium behavior in the metal by reversing associated particle spectra of DT neutron generator - Qingjun Zhu (ASIPP)

14:20 Managing ITER diagnostics and port plug engineering project risks - Russell Feder (Princeton Plasma Physics Laboratory)
12:40 - 14:40
Room: Salon 2
Contributions

12:40 Overview of plasma surface interactions in tungsten with helium plasma exposure - Brian Wirth (University of Tennessee, Knoxville)

13:20 Understanding tungsten divertor sourcing, transport and its impact on core impurity accumulation in DIII-D high performance discharges - Tyler Abrams (General Atomics)

13:40 Utilization of isotopically enriched tungsten tracer particles and outer-midplane collector probes for impurity transport studies in the far scrape-off layer of DIII-D*, - D. Donovan (University of Tennessee Knoxville)

14:00 Study of D retention and impurity emission properties of oxidized B4C coatings under deuterium irradiation in NSTX-U - Felipe Bedoya (University of Illinois)

14:20 DESIGN, CONSTRUCTION AND INSTALLATION OF LIMITER & DIVERTOR OF ADITYA-U TOKAMAK - Kaushal Patel (Institute for Plasma Research)
12:40 - 14:40
Room: Salon 3
Contributions

12:40 Tritium extraction from HCLL/WCLL/DCLL PbLi BBs of DEMO and HCLL TBS of ITER - Marco Utili (ENEA FSN-ING C.R. Brasimone)

13:00 Liquid PbLi atomization in vacuum for tritium and heat recovery - Satoshi Konishi (Institute of Advanced Energy, Kyoto University)

13:20 Recent developments on the TRITON experiment - Belit Garcinuño (CIEMAT)

13:40 Estimation of tritium release and permeation behavior in water cooled solid breeder blanket - Kazunari Katayama (Kyushu University)

14:00 Analyses Of DEMO Tritium Self-sufficiency - Baojie Nie (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

14:20 Validation of Tritium Self-Sufficiency of DEMO - Satoshi Konishi (Institute of Advanced Energy, Kyoto University)
14:40 Break
Break
14:40 - 15:00
15:00
15:00 - 17:00
Room: Salon 1
Contributions

15:00 Preparation and commissioning for the LHD deuterium experiment - Masaki Osakabe (National Institute for Fusion Science, National Institutes of Natural Sciences)

15:20 Review of Research and Engineering on the H-1 Heliac - Boyd Blackwell (Australian National University)

15:40 HIDRA – A Stellarator for Materials Research - Daniel Andruczyk (University of Illinois)

16:00 The quasi-optical steady state 10 MW ECRH system of Wendelstein 7-X - commissioning, plasma operation and future plans - Torsten Stange (Max-Planck-Institute for Plasma Physics)

16:20 Mechanical Monitoring Issues in Preparation to Next Step of W7-X Operation - Victor Bykov (Max Planck Institute for Plasma Physics)

16:40 Prospects for stellarators based on additive manufacturing - Vicente M. Queral (CIEMAT)
15:00 - 17:00
Room: Salon 2
Contributions

15:00 Design and Analysis of an Actively Cooled Window for a High Power Helicon Plasma Source - Arnold Lumsdaine (Oak Ridge National Lab)

15:20 Tokamak design and maintenance scheme trade off Application on CFETR - Eric Villedieu (CEA)

15:40 Study of the impact of pre- and real-time deposition of lithium on plasma performance on NSTX - Gustavo P. Canal (General Atomics)

16:00 CODAC Core System for ITER plant system I&C - Franck Di Maio (ITER Organization)

16:20 Extreme ultraviolet spectroscopy applied to study RMP effects on core impurity concentration in EAST - Germán Vogel (University of Science and Technology of China)

16:40 Development of a utility negative ion test equipment with RF source at ASIPP - Jianglong Wei (Institute of Plasma Physics, Chinese Academy of Sciences)
15:00 - 17:00
Room: Salon 3
Contributions

15:00 Failure Impact of crucial components on DEMO maintenance performance and mitigation attempts - Martin Mittwollen (Karlsruhe Institute of Technology (KIT))

15:20 Fusion R&D Activities at INEST - Jie Yu (Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences)

15:40 FORENSIC ANALYSIS OF FAULTED NSTX-U INNER POLOIDAL FIELD COIL - Joseph Petrella, Jr. (Princeton Plasma Physics Laboratory)

16:00 Proposed methodology for unplanned repair scenarios in ITER - Shanliang Zheng (CCFE, UK Atomic Energy Authority)

16:20 CorteX: A Standardised Remote Operations Communications System that is Inherently Designed to Accommodate Change - Robert Skilton (UKAEA)

16:40 Adjourn