Name: 1st International Conference on Advances in Engineering and Technology (ICAET-2018)
Start: 2018-04-02T09:00:00+05:00
End: 2018-04-03T17:20:00+05:00
Location: BUITEMS, Quetta, Pakistan

1st International Conference on Advances in Engineering and Technology (ICAET-2018)

from Monday 2 April 2018 (09:00) to Tuesday 3 April 2018 (17:20)

Monday 2 April 2018

09:00 Registration
Registration
09:00 - 10:20

10:20 Inauguration Ceremony
Inauguration Ceremony
10:20 - 11:50
Room: Orange Hall

11:50 Tea Break
Tea Break
11:50 - 12:20
12:20 Chemical Engineering
Chemical Engineering
12:20 - 14:00
Room: Purple Hall
Contributions

12:20 Thermal Processing of Biosources and Biodiesel Using Microwave Heating - Farid Bin Ani (UTM Malaysia)

12:40 Production of Alternative Energy from Microalgae - Pakamas Chetpattananondh (Prince of Songla University Thailand)

13:00 Promoting Modern Applications of Biomass Energy for Cooking and Heating in household Sector in Pakistan - Abdul Waheed Bhutto (DUET Karachi)

13:20 Catalytic Pyrolysis of microalgae (Chlorella sp.) Using Zeolite as Catalysts in a Fixed Bed Reactor - Sukritthira Ratanawilai

13:40 Study the effects of epoxy/tri functional mercaptan resins structure based PDLC films - Mujtaba Ellahi (Department of Chemistry, Faculty of Arts & Basic Sciences, Balochistan University of Information Technology, Engineering and Management Sciences (BUITEMS). Quetta 87100 Pakistan)
Civil Engineering & Construction Materials
Civil Engineering & Construction Materials
12:20 - 14:00
Room: Green Hall
Contributions

12:20 Development of a Geotechnical Information Database. - Amanullah Mari (NEDUET Karachi)

12:40 Role of masonry infill wall on the seismic behavior of typical four-storey building in Pakistan - awais ali muhammad

13:00 A study of effect of tempered glass fines in concrete at elevated temperature - Husnain Faisal (UET, Lahore)

13:20 Numerical Evaluation of Slope Stability measures: A Case Study of Birham Landslide - Urwa Khan (Graduate Student" Nagoya University Japan) Saeed Ullah Jan Mandokhail (BUITEMS)

13:40 Emprical SPT-CPT correlation for soils from Lahore, Pakistan - Nawaz Ali Kakar
General
General
12:20 - 14:00
Room: Training Hall
Contributions

12:20 Development and Characterization of Textile Strain Sensors Using Different Weave Designs - Abdul Salam (National Textile University Faisalabad )

12:40 Engineered Silica Nanoparticles and SiNps containing Controlled Release Fertilizer for drought and saline areas - Ayesha Mushtaq (Department of Chemistry, SBK Women’s University, Quetta, Pakistan.)

13:00 SWOT Analysis of Institutional Framework for Engineering Diplomas in Technical and Vocational Education and Training (TVET) System in Pakistan - Aziz Ahmed (Quaid-i-Azam University and BUITEMS)

13:20 9-Level Cascaded H-bridge Multilevel Inverter - Owais Athar Syed (Lecturer )

13:40 Power Production Dynamics of China Pakistan Economic Corridor in Pakistan - Fazal Muhammad (BUITEMS)
Mechanical
Mechanical
12:20 - 14:00
Room: Pink Hall
Contributions

12:20 In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon - Ali Nawaz Mengal

12:40 Hydrodynamic and combustion behavior of low grade coals in a circulating fluidized bed combustor - Ahmad Hussain (Faculty of Engineering Sciences & Technology (FEST))

13:00 Investigation of carbon based adsorbents for the development of thermally-driven adsorption cooling systems - Faizan Shabir (Bahauddin Zakariya University, Multan)

13:20 Thermodynamic investigation of M-cycle assisted open-cycle desiccant air conditioning systems - Hassan Niaz (Bahauddin Zakariya University, Multan)

13:40 Modeling and Simulation of a 100 MW Concentrated Solar Thermal Power Plant Using Parabolic Trough Collectors in Pakistan - Kashif Liaqat (Balochistan University of Information Technology, Engineering and Management Sciences (BUITEMS), Quetta, Pakistan)
Textile
Textile
12:20 - 14:00
Room: Orange Hall
Contributions

12:20 Fibrous Structure for EMI shielding - Jiri Militky (Technical University of Liberec, Czech Republic)

12:40 Manufacturing of high performance multilayer stitched fabric on a hand loom - Mumtaz Hasan Malik (University of Management and Technology)

13:00 An Overview of Different Microencapsulation Techniques for Smart Textiles - Kashif Iqbal (National Textile University Faisalabad Pakistan)

13:20 Fabrication of copper oxide nanoparticles and their application on textiles to make it multi-functional - Sairish Malik

13:40 EFFECT OF MATERIAL AND STITCHING ON TENSILE PROPERTIES OF WOVEN FABRICS - Muhammad Salman Naeem (NTU, Fsd)
12:30 Poster Session
Poster Session
12:30 - 14:00

14:05 Lunch and Prayer
Lunch and Prayer
14:05 - 14:55
15:00
15:00 - 17:00
Room: Purple Hall
Contributions

15:00 Photocatalytical Degradation of Congo Red dye by Nano Titanium Dioxide coated glass Bead under UV light - Asadullah Khan (COMSATS)

15:20 Carbon Dioxide Capture from Natural Gas and Flue Gases Using Membrane Technology - Arshad Hussain (NUST Islamabad)

15:40 Simulation of PEMFC by Using ANSYS Fluent for Isothermal and Non-isothermal Models - Mehmood Saleem (ICET University of the Punjab Lahore)

16:00 Features of Convective Heat Transfer on MHD Peristaltic Movement of Williamson Fluid with the Presence of Joule Heating - Naheeda Iftikhar (BUITEMS)

16:20 Upscale fermentation of Bacillus licheniformis to produce probiotic for poultry, using cheap media (molasses) - Zia-ud- din (CASVAB University of Balochistan Quetta)

16:40 Reorientation of Pakistan’s Energy policy - Sadia Karim (Department of Chemical Engineering, Dawood University of Engineering and Technology, Karachi, Pakistan)
15:00 - 17:00
Room: Green Hall
Contributions

15:00 Site Specific Ground Response Analysis of Peshawar, Pakistan - Khalid Mehmood (Associate Professor, Department of Civil Engineering, Sarhad University of Science and Information Technology, Peshawar)

15:25 Effect of the confining method on the cyclic undrained behaviors of sand - Saeed Mandokhail (BUITEMS)

15:50 Partial Replacement of Cement in Plain Cement Concrete with Bentonite Clay and Quarry Dust - Muhammad Nasir Ayaz Khan (Swedish college of engineering and technology wah cantt)

16:10 Development of Mobile Ecosystem for Smart Sharing of Domestic Water Efficient Collection and Supply Management, for Quetta City - Zafar Baloch (Department of Civil Engineering, Faculty of Engineering and Architecture, BUITEMS, Quetta )

16:35 STRUCTURAL DEFECTS IN RESIDENTIAL BUILDINGS: A STUDY OF QUETTA, PAKISTAN - Jalal Faisal Khan (BUITEMS)
Interdisciplinary Engineering
Interdisciplinary Engineering
15:00 - 17:00
Room: Training Hall
Contributions

15:00 EFFICIENCY AND COST ANALYSIS OF POWER SOURCES IN IMPRESSED CURRENT CATHODIC PROTECTION SYSTEM FOR CORROSION PREVENTION IN BURIED PIPELINES - Syed Awais Athar (BUITEMS)

15:20 Synthesis of Magnetic Nano-rods of Cobalt using Templet from the Anodization of Aluminum as Anodic Aluminum Oxide (AAO) - Moizuddin Moiz (University of Balochistan, Quetta)

15:40 Synchrotron radiation for research in Engineering Sciences : Prospects at SESAME - Intikhab Ulfat (Department of Physics, University of Karachi)

16:00 Extraction and quantification of chlorophyll from microalgae Chlorella sp. - Muhammad Amin

16:20 Trend analysis in precipitation and accessing the influence of climate indices in Baluchistan - Erum Aamir (Capital University of Sciences and Technology)

16:40 EFFECTIVE USE OF ENZYME ZYMASE FOR ENHANCEMENT OF ETHANOL PRODUCTION COUPLE WITH PARAMETRIC EFFECT - Siddique Nasar (BUITEMS)
Mechanical
Mechanical
15:00 - 17:00
Room: Pink Hall
Contributions

15:00 Renewable Energy Resources in Pakistan - Saeed Badshah (IIU Islamabad)

15:20 Comparative analysis of heat transfer coefficient for wood and non-wood pulp fiber suspension - Ghulamullah Kakar (BUITEMS)

15:40 Electrical conductivity and EMI shielding application of high loft non- woven web from acrylic fibrous waste - Muhammad Salman Naeem (NTU, FSD)
Mining Engineering
Mining Engineering
15:00 - 17:00
Room: Orange Hall
Contributions

15:00 Advances in Petroleum Engineering current Industry Situation - Muhammad Owais Naseem (NEDUET Karachi)

15:20 Numerical modeling of main/tail gate of a long wall mining operation - Muhammad Zaka Emad (UET)

15:40 Stability Analysis of flood bunds, A study on Geotechnical Health evaluation of embankments - sumayya noshin (irrigation)

16:00 Investigation of optimum fluidization velocity of CaCO3 and Coal mixture using fluidized bed - Mujahid Hussain Chijjan (MUET, SZAB Campus Khairpur Mir's , Sindh Pakistan)

16:20 Investigation of raw materials for cement industry of Upper Hunza, Gilgit-Baltistan - Zahid Hussain (Dept. of Mining Engineering, Karakoram International University Gilgit-Baltistan, Pakistan.)
15:05 Poster
Poster
15:05 - 17:00

17:00 Tea Break
Tea Break
17:00 - 17:20
Room: SSA
Tuesday 3 April 2018
10:00 Architecture and Town Planning
Architecture and Town Planning
10:00 - 12:00
Room: Green Hall
Contributions

10:00 Deterioration Morphologies of Historic Brick Imitation Ornamented facades of Mughal Architecture - Dr. SAIMA GULZAR (UMT Lahore)

10:20 Architecture becoming a global cliche' - Umer Ahmed Mengal (BUITEMS)

10:40 Material Archives; Understanding Urban Geographies Built from Material Circulation - palwasha amanullah (buitems)

11:00 Disaster Mitigation Strategies for Adobe Houses: A Case Study of District Awaran, Balochistran - Mamoon-Ur-Rashid Mengal (BUITEMS)

11:20 Common Ground in a Liquid City (Urban Entertainment Destination: A Tool against Classism) - Iqra Abbasi (Buitems)

11:40 Interactive Bus Stops: Enhancing user experience to encourage the use of Public Transportation - Sabeen Mehmood Durrani (BUITEMS)
Environmental Engineering and Management
Environmental Engineering and Management
10:00 - 12:00
Room: Pink Hall
Contributions

10:00 Cost Reduction Strategies for Engineering and Technology Organizations in Knowledge Markets - Suleman Aziz Lodhi (UoS)

10:20 SCARCITY OF WATER RESOURCES IN RURAL AREA OF QUETTA DISTRICT: CHALLENGES AND PREPAREDNESS - zainuddin kakar

10:40 Mitigating Freshwater Needs by Reuse of Greywater for Residential Apartments in Islamabad - Hamza Ahmad (Capital University of Science and Technology, Islamabad, Pakistan) Shehryar Ahmed (Capital University of Science and Technology, Islamabad, Pakistan) Arsalan Mazhar (Capital University of Science and Technology, Islamabad, Pakistan)

11:00 Rainwater Harvesting, an important measure to meet water requirement in arid areas of Pakistan. - Furqan Manzoor Awan (Capital University of Science and Technology) Ishtiaq Hassan (Capital University of Science and Technology) Osama Rashid (Capital University of Science and Technology) Zakir Ullah (Capital University of Science and Technology)

11:20 Air Pollution Deterministic Index Modeling (APDIM) for Pakistan: Application in Quetta City - Faiza Akhtar (BUITEMS)

11:40 ASSESSMENT ON QUANTITY MEASUREMENTS OF HEALTHCARE WASTE AND IT’S MANAGEMENT APPROACHES IN BOLAN MEDICAL COMPLEX QUETTA - TAHIRA ISHTIAQ (Environmental Science Department, SBK, Women’s University, Quetta.)
Geological Engineering and Geosciences
Geological Engineering and Geosciences
10:00 - 12:00
Room: Purple Hall
Contributions

10:00 CPEC and Balochistan-Prospects and Challenges - Muhammad Ahmad Farooqui (COMSATS Lahore)

10:20 Enzymatic Stabilization of Expansive Soil - Nabeel Liaqat (Swedish college of enginering and technology wah cantt)

10:40 Effect of Silica Fume and Lime on Compressibility of Baleli Soil - Shabir Ahmed (Geological Engineering Department) Siraj Hussain (Department of Geological Engineering) Ali Nawaz Mengal (Department of Mechanical Engineering) Zafar Baloch (Department of Civil Engineering)

11:00 Comparison of Flooding Irrigation System and Raised Bed Irrigation System for Wheat Crop at Samoo District Jaffarabad Balochistan - Mustansar Hussain Jamali (Mehran University of Engineering and Technology Jamshoro Pakistan)

11:20 EXTRACTION OF OIL FROM ALGAE FOR BIODIESEL PRODUCTION - Abeera Malik (Department of Chemical Engineering, Balochistan university of Information Technology, Engineering and Management Sciences Quetta, Pakistan)
Textile Engineering
Textile Engineering
10:00 - 12:00
Room: Orange Hall
Contributions

10:00 Mechanical Characterization of Economical Waste Based Hybrid Composites for Automotive Application - Yasir Nawab (National Textile University)

10:20 Fabrication of Organic Nanofibers via Electrospinning - Shamshad Ali (Department of Textile Engineering, MUET Jamshoro Pakistan-76060)

10:40 Development of nanofibers based neuropathic patch loaded with Lidocaine to deal with nerve pain in burn patients - Sharjeel Abid (National Textile University)

11:00 Development of antibacterial fibers and study on effect of guar-gum addition on properties of carboxymethylcellulose/alginate fibers - Shagufta Riaz (National Textile University)

11:20 Isocoumarins: Compounds having unique applications - Muhammad Tahir Hussain (National Textile University, Faisalabad, Pakistan)

11:40 Enhancement of anti-microbial activity by natural finishes prepared from herbal spices and wastage peel of fruits applied on textile substrate. - Syed Qutaba Bin tariq (BUITEMS Quetta, Faculty of Engineering, Department of Textile Engineering,)
12:00 Tea Break
Tea Break
12:00 - 12:20
Room: SSA
12:20 Architecture and Town Planning
Architecture and Town Planning
12:20 - 14:20
Room: Green Hall
Contributions

12:20 Making City Planning Regional in 21st Century Pakistan: Towards a National Charter for Climate Change Survival - Sameeta Ahmed (Architect and Coordinator at EarthWaterNetwork, Pakistan. )

12:40 THERE AND BACK AGAIN (Identifying the unidentified) - Aqsa Khan (BUITEMS)

13:00 Panel Discussion
Environmental Engineering and Management
Environmental Engineering and Management
12:20 - 14:20
Room: Pink Hall
Contributions

12:20 Land use changes impact on groundwater quality using remote sensing and GIS in Quetta Valley - Jamal inthestars

12:40 Study of the Fluoride assessment in correlation with different physicochemical parameters in drinking water of some areas of Quetta, Pakistan - Noornama Panezai (Department of Chemistry, Faculty of Arts & Basic Sciences, Balochistan University of Information Technology, Engineering and Management Sciences (BUITEMS). Quetta 87100 Pakistan)

13:00 Synthesis and Characterization of Silver Nano Particle and their application for removal of E-Coli from waste water. - Fouzia Yousafzai (SBKWU Quetta)

13:20 DOMESTIC THREE STAGE TREATMENT OPTION FOR WATER STRESSED COMMUNITIES - Mehwish Mehwish Haq Nawaz (National University of Sciences and Technology)

13:40 Particle size of Acacia Modesta gum powder changes the properties of self-compacting paste ssytems - Muhammad Waqas Malik (National University of Sciences and Technology, Islamabad)

14:00 Solar Based Smart Irrigation System Using PID Controller - Shehzar Shahzad Sheikh (U.S Pakistan Center for Advanced Studies in Energy, NUST) Abeera Javed (BUITEMS, Quetta)
Geological Engineering and Geosciences
Geological Engineering and Geosciences
12:20 - 14:20
Room: Purple Hall
Contributions

12:20 Identification of Brittle and Ductile Zones of Reservoir by Using Well Log Analysis - ibraheem khan

12:40 Strategies to Manage Aquifer Recharge in Balochistan, Pakistan; an Overview - Syed Mobasher Aftab (Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan)

13:00 Future Climatological Drought Projections Over Quetta Valley, Balochistan, Pakistan - Iftikhar Ahmad (University of Balochistan) Imran Hameed Durrani (B-WASA) Shahzada Adnan (PMDC) Syed Mobasher Aftab (BUITEMS)

13:20 Human Machine Interface Glove Using Piezoresistive Textile Based Sensors - Surjeet Kumar (Balochistan University of Information Technology, Engineering and Management Sciences.)

13:40 Improvement of Bearing Capacity of Soft Clayey Soil by Inclusion of Sand Columns - Saddar Gul
14:20 Lunch and Prayer
Lunch and Prayer
14:20 - 15:45

15:45 Closing Ceremony
Closing Ceremony
15:45 - 17:00
Room: Orange Hall

17:00 Tea Break
Tea Break
17:00 - 17:20

Choose timezone